Anodic characteristics and electrochemical machining of two typical γ-TiAl alloys and its quantitative dissolution model in NaNO3 solution

Experimental Study on the Comparison between Network Microstructure Titanium Matrix Composites and Ti6Al4V on EDM Milling

Network microstructure titanium matrix composites (NMTMCs), featuring Ti6Al4V as the matrix and network-distributed TiB whiskers (TiBw) as reinforcement, exhibit remarkable potential for diverse applications due to their superior physical properties. Due to the difficulty in machining titanium matrix composites, electrical discharge machining (EDM) stands as one of the preferred machining techniques for NMTMCs. Nevertheless, the compromised surface quality and the recast layer significantly impact the performance of the workpiece machined by EDM. Therefore, for the purpose of enhancing the surface quality and restraining the defects of NMTMCs, this study conducted comparative EDM milling experiments between NMTMCs and Ti6Al4V to analyze the effects of discharge capacitance, charging current, and pulse interval on the surface roughness, recast layer thickness, recast layer uniformity, and surface microcrack density of both materials. The results indicated that machining energy significantly influences workpiece surface quality. Furthermore, comparative experiments exploring the influence of network reinforcement on EDM milling revealed that NMTMCs have a higher melting point, leading to an accumulation phenomenon in low-energy machining where the reinforcement could not be completely removed. The residual reinforcement in the recasting layer had an adsorption effect on molten metal affecting the thermal conductivity and uniformity within the recasting layer. Finally, specific guidelines are put forward for optimizing the material's surface roughness, recast layer thickness, and uniformity, along with minimizing microcrack density, which attain a processing effect that features a roughness of Ra 0.9 μm, an average recast layer thickness of 6 μm with a range of 8 μm, and a surface microcrack density of 0.08 μm-1.

Fast Fabrication of Complex Surficial Micro-Features Using Sequential Lithography and Jet Electrochemical Machining

This paper presents fabrication of complex surficial micro-features employing a cross-innovative hybrid process inspired from lithography and Jet-ECM. The process is referred here as mask electrolyte jet machining (MEJM). MEJM is a non-contact machining process which combines high resolution of lithography and greater flexibility of Jet-ECM. It is a non-contact process which can fabricate variety of microstructures on difficult-to-machine materials without need of expensive tooling. The presented work demonstrates the process performance of this technology by statistical analysis and multivariate kernel density estimation (KDE) based on probabilistic density function. Micro-letters are fabricated as an example of complex surficial structure comprising of multiple intersecting, straight and curved grooves. The processing response is characterized in terms of geometrical size, similarity ratio, and cumulative shape deviation. Experimental results demonstrated that micro letters with good repeatability (minimum SD of shape error ratio 0.297%) and shape accuracy (minimum shape error of 0.039%) can be fabricated with this technology. The results suggest MEJM could be a promising technology for batch manufacturing of surface microstructures with high productivity.