Efficient electrochemical reduction of CO2 to formate using Sn-Polyaniline film on Ni foam

SnS2/MWNTs/sponge electrode combined with plasma dielectric barrier discharge catalytic system: CO2 reduction and pollutant degradation

SnS2 nanosheets combined with multi-walled carbon nanotubes (MWNTs) were made into sponge electrodes which were used for CO2 reduction reaction (CO2RR) in dielectric barrier discharges (DBD) system. The amounts of formate and formaldehyde produced by CO2 reduction with SnS2/MWNTs/sponge electrode were 299.52 and 31.62 μmol h-1, which were higher than that of MWNTs/sponge electrodes. The addition of pollutants had different degrees of inhibitory effect on CO2 reduction, among which addition of bisphenol A (BPA) had the smallest effect that the degradation rate of BPA was 94.37% and the C1 products remained 204.43 μmol after 60 min discharge. The mechanism of CO2RR was studied by quencher experiment, and the main contribution order of the active substance in DBD system for CO2RR is: H+>e->·OH>·O2-. It was found that the degradation process of pollutants consumed H+ and e- in solution, thereby inhibiting CO2RR. Generally, the SnS2/MWNTs/sponge electrode provided a reference for the design of catalysts for CO2 reduction and pollutant degradation in plasma gas-liquid system.

Halogen-Incorporated Sn Catalysts for Selective Electrochemical CO2 Reduction to Formate

Electrochemically reducing CO₂ to valuable fuels or feedstocks is recognized as a promising strategy to simultaneously tackle the crises of fossil fuel shortage and carbon emission. Sn-based catalysts have been widely studied for electrochemical CO₂ reduction reaction (CO₂ RR) to make formic acid/formate, which unfortunately still suffer from low activity, selectivity and stability. In this work, halogen (F, Cl, Br or I) was introduced into the Sn catalyst by a facile hydrolysis method. The presence of halogen was confirmed by a collection of ex situ and in situ characterizations, which rendered a more positive valence state of Sn in halogen-incorporated Sn catalyst as compared to unmodified Sn under cathodic potentials in CO₂ RR and therefore tuned the adsorption strength of the key intermediate (*OCHO) toward formate formation. As a result, the halogen-incorporated Sn catalyst exhibited greatly enhanced catalytic performance in electrochemical CO₂ RR to produce formate.

Promoting the reduction of CO2 to formate and formaldehyde via gas-liquid interface dielectric barrier discharge using a Zn0.5Cd0.5S/CoP/multiwalled carbon nanotubes catalyst

A Zn_0.5Cd_0.5S (ZCS) solid solution was prepared using a hydrothermal method, in which CoP nanowires were added as a co-catalyst and co-deposited with multiwalled carbon nanotubes (MWNTs) on sponge to prepare a series of ZCS/CoP/MWNTs/sponge electrodes. The microstructures of catalysts were analyzed to confirm ZCS and CoP were successfully loaded in MWNTs/sponge. The CO₂ reduction products (formate and formaldehyde) produced via dielectric barrier discharge (DBD) using the different catalysts proved that the introduction of the CoP nanowires co-catalyst can enhance the catalytic activity of ZCS/MWNTs/sponge in the DBD system. Using 10% CoP and a ZCS/CoP concentration of 2.5 g·L^-1, the resulting ZCS/CoP/MWNTs/sponge catalyst exhibited the best catalytic of CO₂ reduction ability toward formate (7894.6 μmol·L^-1) and formaldehyde (308.5 μmol·L^-1) after 60 min of discharge, respectively. The proposed DBD catalytic mechanism for the reduction of CO₂ was analyzed according to the Tafel slope, density functional theory calculations, photocurrent density and plasma reaction process. Furthermore, the application of the DBD catalytic technology for CO₂ capture and reduction was shown to be efficient in a seawater system, and as such, it could be useful for marine CO₂ storage and conversion.

In-situelectrochemical polymerization of aniline on flexible conductive substrates for supercapacitors and non-enzymatic ascorbic acid sensors

Polyaniline, as a kind of conductive polymer with commercial application prospects, is still under researches in its synthesis and applications. In this work, polyaniline was fabricated on flexible substrates including carbon cloths and polyethylene naphthalate byin situelectropolymerization method. The synthesized flexible electrodes were characterized by scanning electron microscopy, High resolution transmission electron microscope, atomic force microscope, Fourier transform infrared, x-ray diffraction, and x-ray photoelectron spectroscopy. Owing to the conductivity and the reversible redox property, the polyaniline/carbon cloth electrodes show excellent properties such as decent supercapacitor performance and good detection capability toward ascorbic acid. As supercapacitors, the electrodes exhibit a specific capacitance as high as 776 F g^-1at a current density of 1 A g^-1and a long cycle life of 20 000 times in the three-electrode system. As ascorbic acid sensors, the flexible electrodes demonstrate stable response to ascorbic acid in the range of 1-3000μM with an outstanding sensitivity (4228μA mM^-1cm^-2), low detection limit (1μM), and a fast response time. This work holds promise for high-performance and low-cost flexible electrodes for both supercapacitors and non-enzymatic ascorbic acid sensors, and may inspire inventions of self-powered electrochemical sensor.

A Self-Assembled CO2 Reduction Electrocatalyst: Posy-Bouquet-Shaped Gold-Polyaniline Core-Shell Nanocomposite

Here it was demonstrated that the decoration of gold (Au) with polyaniline is an effective approach in increasing its electrocatalytic reduction of CO₂ to CO. The core-shell-structured gold-polyaniline (Au-PANI) nanocomposite delivered a CO₂ -to-CO conversion efficiency of 85 % with a high current density of 11.6 mA cm^-2 . The polyaniline shell facilitated CO₂ adsorption, and the subsequent formation of reaction intermediates on the gold core contributed to the high efficiency observed.