A new method for urine electrofiltration and long term power enhancement using surface modified anodes with activated carbon in ceramic microbial fuel cells

Fundamentals and recent progress in bioelectrochemical system-assisted biohythane production

Biohythane, a balanced mixture of 10%-30% v/v of hydrogen and 70%-90% v/v of methane, could be the backbone of an all-purpose future energy supply. Recently, bioelectrochemical systems (BES) became a new sensation among environmental biotechnology processes with the potential to sustainably generate biohythane. Therefore, to unleash its full potential for scaling up, researchers are consistently improving microbial metabolic pathways, novel reactors, and electrode designs. This review presents a detailed analysis of recently discovered fundamental mechanisms and science and engineering intervention of different strategies to improve the biohythane composition and production rate from BES. However, several milestones are to be achieved, for instance, improving electrode kinetics using efficient catalysts, engineered microbial communities, and improved reactor configurations, for commercializing this sustainable technology. Thus, a future perspective section is included to recommend novel research lines, mainly focusing on the microbial communities and the efficient electrocatalysts, to enhance reactor performance.

Ceramic-microbial fuel cell (C-MFC) for waste water treatment: A mini review

Microbial fuel cell (MFC) is a bio-electrochemical system that utilizes the activity of electrogenic bacteria to generate electricity. When wastewater is used as feed in MFC, its organic constituents are hydrolyzed and oxidized by the bacteria. Hence, this technology is a source of clean electricity while simultaneously treating wastewater. Over the years much research has been done to improve its efficiency as well as to reduce the cost of implementation and functioning. However, scalability and commercialization of this technology still faces several challenges. This mini review discusses the use of ceramics in MFCs using wastewater feed as a method of overcoming the current technological challenges. Ceramics can be used as separators, chassis or electrode, conferring facile chemical and structural stability. The material is low-cost, environment-friendly and easily available. Studies reporting stacked configurations have been mentioned, and those that have reported field studies and technology oriented practical applications. Critical analysis of the scalability of the use of ceramics for the dual purpose of electricity generation as well as wastewater treatment has been done in this review. Future research directives towards potential sustainable commercialization have also been mentioned. C-MFC is a promising technology and the primary aim of this review is to help enhance the knowledge base for the optimization of use of ceramics in MFC to achieve large-scale clean electricity generation and sewage treatment.

Bioelectricity generation from human urine and simultaneous nutrient recovery: Role of Microbial Fuel Cells

Urine is a 'valuable waste' that can be exploited to generate bioelectricity and recover key nutrients for producing NPK-rich biofertilizers. In recent times, improved and innovative waste management technologies have emerged to manage the rapidly increasing environmental pollution and to accomplish the goal of sustainable development. Microbial fuel cells (MFCs) have attracted the attention of environmentalists worldwide to treat human urine and produce power through bioelectrochemical reactions in presence of electroactive bacteria growing on the anode. The bacteria break down the complex organic matter present in urine into simpler compounds and release the electrons which flow through an external circuit generating current at the cathode. Many other useful products are harvested at the end of the process. So, in this review, an attempt has been made to synthesize the information on MFCs fuelled with urine to generate bioelectricity and recover value-added resources (nutrients), and their modifications to enhance productivity. Moreover, configuration and mode of system operation, and factors enhancing the performance of MFCs have been also presented.

Development of a Bio-Digital Interface Powered by Microbial Fuel Cells

This paper reports the first relatable bio-digital interface powered by microbial fuel cells (MFCs) that was developed to inform the public and introduce the concept of using live microbes as waste processors within our homes and cities. An innovative design for the MFC and peripherals system was built as a digital data generator and bioreactor, with a custom-built energy-harvesting controller that was connected to the system to enable efficient system operation using adaptive dynamic cell reconfiguration and transmit data for the bio-digital interface. This system has accomplished multiple (parallel) tasks such as electricity generation, wastewater treatment and autonomous operation. Moreover, the controller demonstrated that microbial behaviour and consequent system operation can benefit from smart algorithms. In addition to these technical achievements, the bio-digital interface is a site for the production of digital art that aims to gain acceptance from a wider-interest community and potential audiences by showcasing the capabilities of living microorganisms in the context of green technologies.

LiFePO4 Battery Material for the Production of Lithium from Brines: Effect of Brine Composition and Benefits of Dilution

Lithium battery materials can be advantageously used for the selective sequestration of lithium ions from natural resources, which contain other cations in high excess. However, for practical applications, this new approach for lithium production requires the battery host materials to be stable over many cycles while retaining the high lithium selectivity. Here, a nearly symmetrical cell design was employed to show that LiFePO₄ shows good capacity retention with cycling in artificial lithium brines representative of brines from Chile, Bolivia and Argentina. A quantitative correlation was identified between brine viscosity and capacity degradation, and for the first time it was demonstrated that the dilution of viscous brines with water significantly enhanced capacity retention and rate capability. The electrochemical and X-ray diffraction characterisation of the cycled electrodes also showed that the high lithium selectivity was preserved with cycling. Raman spectra of the cycled electrodes showed no signs of degradation of the carbon coating of LiFePO₄ , while scanning electron microscopy images showed signs of particle cracking, thus pointing towards interfacial reactions as the cause of capacity degradation.

Effect of simple interventions on the performance of a miniature MFC fed with fresh urine

The aim of the present study is to enhance the performance of a microbial fuel cell (MFC) design by making simple interventions. Specifically, terracotta "t" and mullite "m" ceramics are tested as membranes while carbon veil and carbon cloth are used as electrodes. In the case of "m" cylinders different dimensions are examined (m: ID 30 mm x height 11.5 mm; sm: ID 18 mm x height 18 mm). The units operated continuously with urine as the feedstock. The best performing is the sm type (60-100 μW), followed by the t type (40-80 μW) and the m type (20-40 μW). Polarisation experiments indicated that activated carbon on the anode enhances the power output (t: 423 μW, sm: 288 μW). Similarly, the increase of the surface area and the addition of stainless steel mesh on the cathode improves the power performance for the "sm" and the "t" units. Furthermore, it is shown that the design with the smaller internal diameter, performs better and is more stable through time.

Electrosynthesis, modulation, and self-driven electroseparation in microbial fuel cells

Microbial electrosynthesis (MES) represents a sustainable platform that converts waste into resources, using microorganisms within an electrochemical cell. Traditionally, MES refers to the oxidation/reduction of a reactant at the electrode surface with externally applied potential bias. However, microbial fuel cells (MFCs) generate electrons that can drive electrochemical reactions at otherwise unbiased electrodes. Electrosynthesis in MFCs is driven by microbial oxidation of organic matter releasing electrons that force the migration of cationic species to the cathode. Here, we explore how electrosynthesis can coexist within electricity-producing MFCs thanks to electro-separation of cations, electroosmotic drag, and oxygen reduction within appropriately designed systems. More importantly, we report on a novel method of in situ modulation for electrosynthesis, through additional “pin” electrodes. Several MFC electrosynthesis modulating methods that adjust the electrode potential of each half-cell through the pin electrodes are presented. The innovative concept of electrosynthesis within the electricity producing MFCs provides a multidisciplinary platform converting waste-to-resources in a self-sustainable way.

Effect of microbial fuel cell operation time on the disinfection efficacy of electrochemically synthesised catholyte from urine

•

The MFC with the thickest ceramic membrane produced the best quality catholyte.

•

MFC operation time contributes to the catholyte quality and killing properties.

•

Catholyte from ceramic MFC (10 mm) reached pH 11 at day 42 and eradicated E. coli.

Microbial fuel cells (MFCs) offer an excellent solution to tackle some of the major challenges currently faced by humankind: sustainable energy sources, waste management and water stress. Besides treating wastewater and producing useful electricity from urine, ceramic MFCs can also generate biocidal catholyte in-situ. It has been proved that the electricity generation from the MFCs has a high impact in the catholyte composition. Therefore, the catholyte composition constantly changes while electricity is generated. However, these changes in catholyte composition with time has not yet been studied and that could highly contribute to the disinfection efficacy. In this work, the evolution of the catholyte generation and composition with the MFC operation time has been chemically and microbiologically evaluated, during 42 days. The results show an increase in pH and conductivity with the operation time, reaching pH 11.5. Flow cytometry and luminometer analyses of bioluminescent pathogenic E. coli exposed to the synthesised catholyte revealed killing properties against bacterial cells. A bio-electrochemical system, capable of electricity generation and simultaneous production of bactericidal catholyte from human urine is presented. The possibility to electrochemically generate in-situ a bacterial killing agent from urine, offers a great opportunity for water reuse and resource recovery for practical implementations.

Impact of Inoculum Type on the Microbial Community and Power Performance of Urine-Fed Microbial Fuel Cells

Bacteria are the driving force of the microbial fuel cell (MFC) technology, which benefits from their natural ability to degrade organic matter and generate electricity. The development of an efficient anodic biofilm has a significant impact on the power performance of this technology so it is essential to understand the effects of the inoculum nature on the anodic bacterial diversity and establish its relationship with the power performance of the system. Thus, this work aims at analysing the impact of 3 different types of inoculum: (i) stored urine, (ii) sludge and (iii) effluent from a working MFC, on the microbial community of the anodic biofilm and therefore on the power performance of urine-fed ceramic MFCs. The results showed that MFCs inoculated with sludge outperformed the rest and reached a maximum power output of 40.38 mW·m^-2_anode (1.21 mW). The power performance of these systems increased over time whereas the power output by MFCs inoculated either with stored urine or effluent decreased after day 30. These results are directly related to the establishment and adaptation of the microbial community on the anode during the assay. Results showed the direct relationship between the bacterial community composition, originating from the different inocula, and power generation within the MFCs.