Case study: Electrochemical Geo-Oxidation (ECGO) treatment of Massachusetts New Bedford Harbor sediment PCBs

Electrochemical remediation of synthetic and real marine sediments contaminated by PAHs, Hg and As under low electric field values

To date, remediation, protection, and restoration of contaminated sites is a global concern. The current technologies to restore sediments characterized by heterogeneous characteristics, several pollutants, fine grains, and low hydraulic permeability are poorly effective; hence their remediation is still challenging. A promising approach for the sediment's remediation could be the electrochemical route since it is a not-expensive, effective and noninvasive in situ technology. Electrochemical remediation (ER) is commonly studied under relatively high electric fields (E ≥ 1 V cm-1) and using costly processing fluids in a three compartments cell aiming to desorb and transport the contaminants into the processing fluids (secondary dangerous effluent). In this work, contaminated marine sediments were electrochemically treated focusing on the insertion of electrodes directly in the sediments and adopting, for the first time for real sediments, low E values (≤ 0.25 V cm-1) for 4-days period. It was observed that PAHs can be simultaneously transported and degraded in situ preventing the production of a secondary dangerous effluent and reducing the energy consumption. Firstly, clay marine sediments dragged from Capo Granitola Coast (Trapani, Italy) spiked with five PAHs congeners (5PAHs), Hg and As were used as a simplified model matrix and treated to simulate a real case study. A total PAHs removal efficiency of 57% was reached after 96 h of treatment under 0.05 V cm-1. Then, real polluted marine sediments from Augusta Bay (Syracuse) and Bagnoli-Coroglio Bay (Naples) in the southern Italy were treated as real contaminated sediments to be restored, to validate the proposed approach for real cases. A quite good removal efficiency of PAHs was reached after 96 h of electrochemical treatment coupled with a low energetic consumption due to the rather E values adopted. In addition, it was observed that this approach, under the adopted conditions, is unsuitable for the remediation of Hg and As.

Electrokinetic remediation for the removal of heavy metals in soil: Limitations, solutions and prospection

Electrokinetic remediation (EKR) technology is a promising method to remove heavy metals from low permeability soil, because it is environmentally friendly, efficient and economical, and can realize in-situ remediation. In this paper, the basic principles and related physical and chemical phenomena of EKR are systematically summarized, and three limiting problems of EKR technology are put forward: the weak ability of dissolving metals, focusing effect, and energy consumption. There are many methods to solve these technical problems, but there is a lack of systematic summary of the causes of problems and solutions. Based on various enhanced EKR technologies, this paper summarizes the main ideas to solve the limiting problems. The advantages and disadvantages of each technology are compared, which has guiding significance for the development of new technology in the future. This paper also discusses the dissolution of residual heavy metals, which is rare in other articles. The energy consumption of EKR and the remediation effect are equally important, and both can be used as indicators for evaluating the feasibility of new technologies. This paper reviews the influence of various electric field conditions on power consumption, such as renewable energy supply, new electrode materials and electrode configurations, suitable voltage values and functional electrolytes. In addition, a variety of energy consumption calculation methods are also introduced, which are suitable for ohmic heat loss, energy distribution when there is non-target ion competition, and power consumption of specific ions in various metal ions. Researchers can make selective reference according to their actual situations. This paper also systematically introduces the engineering design and cost calculation of EKR, lists the research progress of some engineering cases and pilot-scale tests, analyzes the reasons why it is difficult to apply EKR technology in large-scale engineering at present, and puts forward the future research direction.

Recent advances in PCB removal from historically contaminated environmental matrices

Despite being drastically restricted in the 1970s, polychlorinated biphenyls (PCBs) still belong among the most hazardous contaminants. The chemical stability and dielectric properties of PCBs made them suitable for a number of applications, which then lead to their ubiquitous presence in the environment. PCBs are highly bioaccumulative and persistent, and their teratogenic, carcinogenic, and endocrine-disrupting features have been widely reported in the literature. This review discusses recent advances in different techniques and approaches to remediate historically contaminated matrices, which are one of the most problematic in regard to decontamination feasibility and efficiency. The current knowledge published in the literature shows that PCBs are not sufficiently removed from the environment by natural processes, and thus, the suitability of some approaches (e.g., natural attenuation) is limited. Physicochemical processes are still the most effective; however, their extensive use is constrained by their high cost and often their destructiveness toward the matrices. Despite their limited reliability, biological methods and their application in combinations with other techniques could be promising. The literature reviewed in this paper documents that a combination of techniques differing in their principles should be a future research direction. Other aspects discussed in this work include the incompleteness of some studies. More attention should be given to the evaluation of toxicity during these processes, particularly in terms of monitoring different modes of toxic action. In addition, decomposition mechanisms and products need to be sufficiently clarified before combined, tailor-made approaches can be employed.