Electrodeposition of nanostructured cobalt films from a deep eutectic solvent: Influence of the substrate and deposition potential range

Enhanced Activation of Peroxymonosulfate for Tetracycline Degradation Using CoNi-Based Electrodeposited Films

Synthesizing efficient heterogeneous catalysts with multiple active sites able to activate peroxymonosulfate (PMS) for the degradation of persistent organic pollutants continues to be a challenge for societies worldwide. In response, cost-effective, eco-friendly oxidized Ni-rich and Co-rich CoNi micro-nanostructured films were fabricated following a two-step process based on simple electrodeposition using green deep eutectic solvent as an electrochemical media and thermal annealing. The CoNi-based catalysts demonstrated exceptional efficiency in the heterogeneous catalyzed activation of PMS for tetracycline degradation and mineralization. The effects of the catalysts' chemical nature and morphology, the pH, the concentration of PMS, irradiation with visible light, and the duration of contact with the catalysts on the degradation and mineralization of tetracycline were also studied. In dark conditions, oxidized Co-rich CoNi degraded more than 99% of tetracyclines in only 30 min and mineralized more than 99% of them in only 60 min. Moreover, the degradation kinetics doubled from 0.173 min^-1 in dark conditions to 0.388 min^-1 under visible light irradiation. In addition, the material demonstrated excellent reusability and can be easily recovered with simple heat treatment. Given those findings, our work provides new strategies for constructing high-efficiency and cost-effective PMS catalysts and elucidating the effects of operational parameters and primary reactive species formed by the catalyst-PMS system on water treatment technologies.

Electroless Cobalt Deposition on Dealloyed Nanoporous Gold Substrate: A Versatile Technique to Control Morphological and Magnetic Properties

The connection of multidisciplinary and versatile techniques capable of depositing and modeling thin films in multistep complex fabrication processes offers different perspectives and additional degrees of freedom in the realization of patterned magnetic materials whose peculiar physical properties meet the specific needs of several applications. In this work, a fast and cost-effective dealloying process is combined with a fast, low-cost, scalable electroless deposition technique to realize hybrid magnetic heterostructures. The gold nanoporous surface obtained by the dealloying of an Au₄₀Si₂₀Cu₂₈Ag₇Pd₅ ribbon is used as a nanostructured substrate for the electrodeposition of cobalt. In the first steps of the deposition, the Co atoms fill the gold pores and arrange themselves into a patterned thin film with harder magnetic properties; then they continue their growth into an upper layer with softer magnetic properties. The structural characterization of the hybrid magnetic heterostructures is performed using an X-ray diffraction technique and energy-dispersive X-ray spectroscopy, while the morphology of the samples as a function of the electrodeposition time is characterized by images taken in top and cross-section view using scanning electron microscopy. Then, the structural and morphologic features are correlated with the room-temperature magnetic properties deduced from an alternating-gradient magnetometer's measurements of the hysteresis loop and first order reversal curves.

Application of deep eutectic solvents in protein extraction and purification

Deep eutectic solvents (DESs) are a mixture of hydrogen bond donor (HBD) and hydrogen bond acceptor (HBA) molecules that can consist, respectively, of natural plant metabolites such as sugars, carboxylic acids, amino acids, and ionic molecules, which are for the vast majority ammonium salts. Media such as DESs are modular tools of sustainability that can be pointed toward the extraction of bioactive molecules due to their excellent physicochemical properties, their relatively low price, and accessibility. The present review focuses on the application of DESs for protein extraction and purification. The in-depth effects and principles that apply to DES-mediated extraction using various renewable biomasses will be discussed as well. One of the most important observations being made is that DESs have a clear ability to maintain the biological and/or functional activity of the extracted proteins, as well as increase their stability compared to traditional solvents. They demonstrate true potential for a reproducible but more importantly, scalable protein extraction and purification compared to traditional methods while enabling waste valorization in some particular cases.

Deep Eutectic Solvent as Green Solvent in Extraction of Biological Macromolecules: A Review

Greater awareness of environmental sustainability has driven many industries to transition from using synthetic organic solvents to greener solvents in their manufacturing. Deep eutectic solvents (DESs) have emerged as a highly promising category of green solvents with well-demonstrated and wide-ranging applications, including their use as a solvent in extraction of small-molecule bioactive compounds for food and pharmaceutical applications. The use of DES as an extraction solvent of biological macromolecules, on the other hand, has not been as extensively studied. Thereby, the feasibility of employing DES for biomacromolecule extraction has not been well elucidated. To bridge this gap, this review provides an overview of DES with an emphasis on its unique physicochemical properties that make it an attractive green solvent (e.g., non-toxicity, biodegradability, ease of preparation, renewable, tailorable properties). Recent advances in DES extraction of three classes of biomacromolecules—i.e., proteins, carbohydrates, and lipids—were discussed and future research needs were identified. The importance of DES’s properties—particularly its viscosity, polarity, molar ratio of DES components, and water addition—on the DES extraction’s performance were discussed. Not unlike the findings from DES extraction of bioactive small molecules, DES extraction of biomacromolecules was concluded to be generally superior to extraction using synthetic organic solvents.

Cobalt Electrochemical Recovery from Lithium Cobalt Oxides in Deep Eutectic Choline Chloride+Urea Solvents

Electrochemical recovery of the cobalt in deep eutectic solvent shows its promise in recycling and recovery of valuable elements from the spent lithium-ion battery due to its high selectivity and minimal environmental impacts. This work unveiled the roles of the substrates, applied potentials, and operating temperatures on the performance of cobalt electrochemical recovery in a deep eutectic choline chloride+urea solvent. The solvent contains cobalt and lithium ions extracted from lithium cobalt oxides - 3an essential lithium-ion battery cathode material. Our results highlight that the substrate predetermines the cobalt recovery modes via substrate-cobalt interactions, which could be predicted by the cobalt surface segregation energies and crystallographic misfits. We also show that a moderate cathode potential under -1.0 V vs. silver quasi-reference electrode at 94-104 °C is essential to ensure a selective cobalt recovery at an optimal rate. We also found that the stainless-steel mesh is an optimal substrate for cobalt recovery due to its relatively high selectivity, fast recovery rate, and easy cobalt collection. Our work provides new insights on metal recovery in deep eutectic solvents and offers a new avenue to control the metal electrodeposition modes via modulation of substrate compositions and crystal structures.

Electrochemical Behavior and Electrodeposition of Sn Coating from Choline Chloride–Urea Deep Eutectic Solvents

The electrochemical behavior and electrodeposition of Sn were investigated in choline chloride (ChCl)–urea deep eutectic solvents (DESs) containing SnCl2 by cyclic voltammetry (CV) and chronoamperometry techniques. The electrodeposition of Sn(II) was a quasi-reversible, single-step two-electron-transfer process. The average transfer coefficient and diffusion coefficient of 0.2 M Sn(II) in ChCl–urea at 323 K were 0.29 and 1.35 × 10−9 cm2∙s−1. The nucleation overpotential decreased with the increase in temperature and SnCl2 concentration. The results of the chronoamperometry indicated that the Sn deposition on tungsten electrode occurred by three-dimensional instantaneous nucleation and diffusion controlled growth using the Scharifker–Hills model. Scanning electron microscopy (SEM) showed that the morphology of the deposits is uniform, as a dense and compact film prepared by potentiostatic electrolysis on Cu substrate. X-ray diffraction (XRD) analysis revealed that the deposits were pure metallic Sn.