LiBO2-modified LiCoO2 as an efficient cathode with garnet framework Li6.75La3Zr1.75Nb0.25O12 electrolyte toward building all-solid-state lithium battery for high-temperature operation

Synthesis and Characterization of the New Li1+xAl1+xSi1-xO4 (x = 0-0.25) Solid Electrolyte for Lithium-Ion Batteries

A systematic study was performed to investigate the effect of the sintering temperature, sintering duration, and aluminum doping on the crystalline structure and ionic conductivity of the Li1+xAl1+xSi1-xO4 (LASO; x = 0-0.25) solid electrolyte. There was a strong indication that an increase in the sintering temperature and sintering time increased the ionic conductivity of the electrolyte. In particular, the doping concentration and composition ratio (Li1+xAl1+xSi1-xO4; x = 0-0.25) were found to be crucial factors for achieving high ionic conductivity. The sintering time of 18 h and lithium concentration influenced the lattice parameters of the LASO electrolyte, resulting in a significant improvement in ionic conductivity from 2.11 × 10-6 (for pristine LASO) to 1.07 × 10-5 S cm-1. An increase in the lithium concentration affected the stoichiometry, and it facilitated a smoother Li-ion transfer process since lithium served as an ion-conducting bridge between LASO grains.

All-Solid-State Garnet-Based Lithium Batteries at Work-In Operando TEM Investigations of Delithiation/Lithiation Process and Capacity Degradation Mechanism

Li₇ La₃ Zr₂ O₁₂ (LLZO)-based all-solid-state Li batteries (SSLBs) are very attractive next-generation energy storage devices owing to their potential for achieving enhanced safety and improved energy density. However, the rigid nature of the ceramics challenges the SSLB fabrication and the afterward interfacial stability during electrochemical cycling. Here, a promising LLZO-based SSLB with a high areal capacity and stable cycle performance over 100 cycles is demonstrated. In operando transmission electron microscopy (TEM) is used for successfully demonstrating and investigating the delithiation/lithiation process and understanding the capacity degradation mechanism of the SSLB on an atomic scale. Other than the interfacial delamination between LLZO and LiCoO₂ (LCO) owing to the stress evolvement during electrochemical cycling, oxygen deficiency of LCO not only causes microcrack formation in LCO but also partially decomposes LCO into metallic Co and is suggested to contribute to the capacity degradation based on the atomic-scale insights. When discharging the SSLB to a voltage of ≈1.2 versus Li/Li⁺ , severe capacity fading from the irreversible decomposition of LCO into metallic Co and Li₂ O is observed under in operando TEM. These observations reveal the capacity degradation mechanisms of the LLZO-based SSLB, which provides important information for future LLZO-based SSLB developments.

A high-energy all-solid-state lithium metal battery with "single-crystal" lithium-rich layered oxides

The "single-crystal" lithium-rich layered oxide (SC-LLO) material is applied for the first time to construct a composite cathode by a co-sintering process for garnet-based high-energy all-solid-state lithium metal batteries, which exhibit the high initial discharge capacity of ∼226 mA h g^-1, and good capacity retention after tens of cycles.