Electronic structure and electrochemical performance of CoS2/MoS2 nanosheet composite: Simulation calculation and experimental investigation

N-doped three-dimensional needle-like CoS2 bridge connection Co3O4 core-shell structure as high-efficiency room temperature NO2 gas sensor

The N-doped three-dimensional (3D) needle bridge connection core-shell structure N-CoS₂@Co₃O₄ synthesized in this work was prepared by simple hydrothermal and high-temperature vulcanization methods. The optimized N-CoS₂@Co₃O₄^-2 composite response to NO₂ is 62.3-100 ppm, a response time of 1.3 s, the recovery time of 17.98 s, the detection limit of 5 ppb and stability of as long as 10 weeks at room temperature (RT). Its excellent NO₂ sensing performance is attributed to the unique porous and bridge connection core-shell structure of the N-CoS₂@Co₃O₄^-2 with high specific surface area, interconnected internal channels, abundant exposed S edge active sites, and high catalytic performance promoted by N-doping. This simple manufacturing method of high-performance sensing materials paves the way for the design of N-doped bridge connection core-shell structures.

Synthesis and electrochemical performance of an electroactive nitrogen-doping SnO2 nanoarray supported on carbon fiber

An electroactive nitrogen-doping tin dioxide nanorod array (N-SnO2 NRA) is designed as an effective energy-storage electrode material for supercapacitor applications. N-SnO2 supported on a carbon fiber substrate is prepared using SnCl4 as a precursor through hydrolysis, hydrothermal growth, and an NH3-nitriding process. Electroactive N-SnO2 is formed by an N-doping reaction between Sn(OH)4 and NH3, revealing a high nitrogen-doping level of 12.5% in N-SnO2. N-SnO2/carbon fiber reveals a lower ohmic resistance and charge transfer resistance than SnO2/carbon fiber, which is consistent with its higher current response and lower voltage drop in electrochemical measurements. N-SnO2 NRA has an independent nanoarray structure and a small side length of a quadrangular nanorod, contributing to a more accessible interspace, reactive sites, and feasible electrolyte ion diffusion. The N-SnO2/carbon fiber NRA electrode shows higher specific capacitance (105.4 F g−1 at 0.5 A g−1) and rate capacitance retention (45.0% from 0.5 to 5 A g−1) than a SnO2/carbon fiber NRA electrode (58.6 F g−1, 38.4%). Significantly, the cycling capacitance retention after 2000 cycles increases from 78.1% of SnO2/carbon fiber to 98.8% of N-SnO2/carbon fiber, presenting a superior electrochemical cycling stability. The N-SnO2 supercapacitor maintains stable power working at an output voltage of 1.6 V. The specific capacitance decreases from 75.2 to 55.1 F g−1 when the current density increases from 1 to 10 A g−1. The corresponding energy density decreases from 24.23 to 9.81 Wh kg−1, presenting a reasonable rate capability. So, the prepared N-SnO2 nanorod array demonstrates superior capacitance performance for energy-storage applications.

Electrochemical performance of the homologous molybdenum(vi) redox-active gel polymer electrolyte system

PVA–H₃PO₄–Na₂MoO₄ and PVA–H₃PO₄–PMo₁₂ are assembled into a single solid-state supercapacitor to improve the specific capacitance. Homologous molybdenum (vi) of PMo₁₂ and Na₂MoO₄ provides synergistic effect to improve faradaic capacitance performance.

Rare earth material CeO2 modified CoS2 nanospheres for efficient photocatalytic hydrogen evolution

The construction of a heterojunction promoted the separation of electrons and holes, so that CeO2/CoS2 exhibited an excellent hydrogen evolution performance.

Fabrication of Highly Ordered Ag/TiO2 Nanopore Array as a Self-Cleaning and Recycling SERS Substrate

Silver nanoparticles deposited on a titania nanopore array (Ag/TiO2 NPA) has been designed as a surface-enhanced Raman scattering (SERS) substrate for sensitive and recycling application of organic molecule detection. A TiO2 NPA was fabricated by a surface oxidization reaction of a titanium sheet by a double anodization process. A Ag/TiO2 NPA was then formed by depositing silver nanoparticles onto the TiO2 NPA by a cycling chemical reduction deposition process. The Ag/TiO2 NPA has a uniform mono-layer dispersion of Ag nanoparticles with a size of 30–50 nm on TiO2 nanopores with a diameter of 100–110 nm. The Ag/TiO2 NPA SERS substrate could facilitate interfacial adsorption of Rhodamine 6G (R6G), which achieves a sensitive detection limit of 10−8 M R6G through SERS spectrum measurement. The Ag/TiO2 NPA SERS substrate achieves an analytical enhancement factor value of 2.6 × 105. The Ag/TiO2 NRA could promote the UV light-excited photocatalytic degradation reaction of R6G adsorbed on its surface which gives rise to a refreshed Ag/TiO2 NRA under UV irradiation for 60 min and accordingly behave as a self-cleaning and recycling SERS substrate. The Ag/TiO2 NPA exhibits a much higher R6G degradation reaction rate constant (0.05764 min−1) than the TiO2 NPA (0.02600 min−1), indicating its superior photocatalytic activity and self-cleaning activity. The refreshed Ag/TiO2 NPA was able to be recycled for the Raman detection of R6G, maintaining a high stability, reproducibility, and cyclability. The highly ordered Ag/TiO2 NPA with well controlled Ag nanoparticle dispersion and TiO2 nanopore shape could act as a suitable SERS substrate for recycling and self-cleaning application for stable and sensitive molecule detection.

Fabrication and charge storage capacitance of PPY/TiO2/PPY jacket nanotube array

A PPY/TiO2/PPY jacket nanotube array was fabricated by coating PPY layer on the external and internal surface of a tube wall-separated TiO2 nanotube array. It shows coaxial triple-walled nanotube structure with two PPY nanotube layers sandwiching one TiO2 nanotube layer. PPY/TiO2/PPY reveals much higher current response than TiO2. The theoretical calculation indicates PPY/TiO2/PPY reveals higher density of states and lower band gap, accordingly presenting higher conductivity and electroactivity, which is consistent with the experimental result of a higher current response. The electroactivity is highly enhanced in H2SO4 rather than Na2SO4 electrolyte due to feasible pronation process of PPY in an acidic solution. PPY/TiO2/PPY could conduct the redox reaction in H2SO4 electrolyte which involves the reversible protonation/deprotonation and HSO4 − doping/dedoping process and accordingly contributes to Faradaic pseudocapacitance. The specific capacitance is highly enhanced from 1.7 mF cm−2 of TiO2 to 123.4 mF cm−2 of PPY/TiO2/PPY at 0.1 mA cm−2 in H2SO4 electrolyte. The capacitance also declines from 123.4 to 31.7 mF cm−2 when the current density increases from 0.1 to 1 mA cm−2, presenting the rate capacitance retention of 26.7% due to the semiconductivity of TiO2. A PPY/TiO2/PPY jacket nanotube with high charge storage capacitance is regarded as a promising supercapacitor electrode material.