Charge transfer accelerated by internal electric field of MoS2 QDs-BiOI p-n heterojunction for high performance cathodic PEC aptasensing

A novel photoelectrochemical aptasensor based on 3D flower-like g-C3N4/BiOI p-n heterojunction for the sensitive detection of kanamycin

BACKGROUND

Kanamycin (KAN) residues in animal-derived foods continuously enter the human body, which will pose serious threats to human health such as hearing loss, nephrotoxicity and other complications. Therefore, to sensitively detect KAN residues by a reliable technology is extremely urgent in food quality and safety. Compared with traditional methods being limited by cost and complexity, photoelectrochemical (PEC) biosensors benefit from some merits such as rapid response, excellent sensitivity and good stability. In this study, the construction of a highly efficient PEC platform to realize KAN residues detection is discussed.

RESULTS

Herein, a novel p-n heterojunction consisting of flower-like BiOI microspheres and graphite carbon nitride (g-C3N4) nanoflakes was developed to establish a PEC aptasensor for KAN detection at 0 V. The prepared g-C3N4/BiOI heterostructure showed not only significantly enhanced PEC activity due to the larger specific surface area but also greatly increased charge separation efficiency owing to the strong internal electric field. Meanwhile, using g-C3N4/BiOI as a highly efficient photoactive material for binding amine-functionalized aptamers to capture KAN, the photocurrent signals showed a 'turn off' mode to achieve the sensitive detection of KAN. The proposed PEC aptasensor exhibited linear response for KAN from 5 × 10-9 to 3 × 10-7 mol L-1 with a low detection limit of 1.31 × 10-9 mol L-1, and satisfactory recoveries (97.44-107.38 %) were obtained in real food samples analysis.

SIGNIFICANCE

This work presented a novel p-n heterojunction-based PEC aptasensor with strong selectivity and stability, rendering it allowed to detect KAN in animal-derived foods including milk, honey and pork. Additionally, the detection range satisfied the MRLs for KAN specified by the national standards, demonstrating the potential application for food analysis. The study provides a new insight into the development of efficient and practical biosensors for antibiotic residues detection.

Potential application of bismuth oxyiodide (BiOI) when it meets light

Bismuth oxyiodide (BiOI) is a kind of typical two-dimensional (2D) material that has been increasingly developed alongside other 2D materials such as graphene, MXenes, and transition-metal dichalcogenide. However, its potential applications have not been widely whispered compared to those of other 2D materials. Using its distinctive properties, BiOI can be used for various applications, especially when it meets sunlight and other light-related electromagnetic waves. In this present review, we discuss the developments of BiOI and challenges in the applications for photodetector and light-assisted sensors, photovoltaic devices, optoelectronic logic devices, as well as photocatalysts. We start the discussion with a basic understanding and development of BiOI, crystal structure, and its properties. The synthesis and further development, such as green synthesis and its challenges in the synthesis-suited industry, as well as device integration, are also explained together with a plausible strategy to enhance the feasibility of BiOI for those various applications. We believe that the provided discussion and perspectives will not only promote BiOI to be one of the highly considered 2D materials but can also assist recent graduates in any materials science discipline and inform the senior scientists and industrial-based stakeholders of the latest advances in bismuth oxide and mixed-anion compounds.

ZIF-67 Anchored on MoS2/rGO Heterostructure for Non-Enzymatic and Visible-Light-Sensitive Photoelectrochemical Biosensing

Graphene and graphene-like two-dimensional layered nanomaterials-based photoelectrochemical (PEC) biosensors have recently grown rapidly in popularity thanks to their advantages of high sensitivity and low background signal, which have attracted tremendous attention in ultrahigh sensitive small molecule detection. This work proposes a non-enzymatic and visible-light-sensitive PEC biosensing platform based on ZIF-67@MoS2/rGO composite which is synthesized through a facile and one-step microwave-assisted hydrothermal method. The combination of MoS2 and rGO could construct van der Waals heterostructures, which not only act as visible-light-active nanomaterials, but facilitate charge carriers transfer between the photoelectrode and glassy carbon electrode (GCE). ZIF-67 anchored on MoS2/rGO heterostructures provides large specific surface areas and a high proportion of catalytic sites, which cooperate with MoS2 nanosheets, realizing rapid and efficient enzyme-free electrocatalytic oxidation of glucose. The ZIF-67@MoS2/rGO-modified GCE can realize the rapid and sensitive detection of glucose at low detection voltage, which exhibits a high sensitivity of 12.62 μAmM-1cm-2. Finally, the ZIF-67@MoS2/rGO PEC biosensor is developed by integrating the ZIF-67@MoS2/rGO with a screen-printed electrode (SPE), which exhibits a high sensitivity of 3.479 μAmM-1cm-2 and a low detection limit of 1.39 μM. The biosensor's selectivity, stability, and repeatability are systematically investigated, and its practicability is evaluated by detecting clinical serum samples.

An ultrasensitive photoelectrochemical assay for tumor necrosis factor-alpha based on hollow CdS cubes as a signal generator and NiCo2O4-Au as a signal extinguisher

Sensitive detection of tumor necrosis factor-alpha (TNF-α) in human serum is beneficial for finding cancer patients early due to overexpressed TNF-α being related to some cancers. Here, a photoelectrochemical (PEC) aptasensor was constructed for ultrasensitive TNF-α assay based on the signal generator of hollow CdS cubes (H-CdS) and the signal extinguishing activity of NiCo2O4-Au. In this work, compared with traditional solid CdS, H-CdS could greatly promote the PEC signal because its hollow structure could accelerate the separation of photogenerated charges, which also possesses abundant active sites and high light absorption capability. Moreover, H-CdS can be prepared facilely with Cd-based Prussian blue analogs as the precursor. Meanwhile, NiCo2O4-Au was fabricated and utilized as a signal extinguisher. In the presence of TNF-α, NiCo2O4-Au could be introduced onto the H-CdS modified electrode, producing competitive consumption of the electron donor effect, the p-n semiconductor quenching effect, and the mimetic enzymatic catalytic precipitation effect, which all can significantly reduce the PEC signal. Based on the signal extinguishing activity of NiCo2O4-Au and the signal generator of H-CdS, TNF-α can be detected sensitively with a lower detection limit (0.63 fg mL-1) and a wide linear range (1 fg mL-1- to 1 ng mL-1), which may have a potential application in the PEC bioanalysis field and the disease diagnostics field.

MXene Enhanced Photoactivity of Bi2O3/Bi2S3 Heterojunction with G-wire Superstructure for Photoelectrochemical Detection of TET1 Protein

Ten-eleven translocation 1 (TET1) protein has the potential to accelerate the oxygenation of 5-methylcytosine to 5-hydroxymethylcytosine (5hmC); then the -CH₂OH of 5hmC can further covalently react with -SH catalyzed by M.HhaI methyltransferase. A brand-new photoelectrochemical (PEC) detection technique for the TET1 protein was created in light of this. For this objective, the Bi₂O₃/Bi₂S₃ heterojunction was first prepared by a one-pot hydrothermal method and served for photosensitive materials. For further enhancing the photoactivity, Bi₂O₃/Bi₂S₃ was blended with MXene to form an energy band-matched structure, thus improving the migration kinetics of photogenerated carriers. For achieving a high sensitivity of detection, a DNA Walker incorporated with the nicking endonuclease (Nb.BbvCI enzyme)-assisted signal amplification strategy was presented to output exponential G-quadruplex fragments. Self-assembly of the free G-quadruplex sequence into a G-wire superstructure with the assistance of Mg²⁺ provided more loading sites for MB and amplified the PEC signal. The linear range of the biosensor was 0.1-10 μg/mL with a detection limit of 0.024 μg/mL (S/N = 3) for TET1 protein under optimal experimental conditions. The suitability of the proposed method was evaluated by inhibitor screening experiments and the influence of environmental degradation on the activity of TET1 protein.

Ultrathin Covalent Organic Framework Nanosheets/Ti3C2Tx-Based Photoelectrochemical Biosensor for Efficient Detection of Prostate-Specific Antigen

Designable and ultrathin covalent organic framework nanosheets (CONs) with good photoelectric activity are promising candidates for the construction of photoelectrochemical (PEC) biosensors for the detection of low-abundance biological substrates. However, achieving highly sensitive PEC properties by using emerging covalent organic framework nanosheets (CONs) remains a great challenge due to the polymeric nature and poor photoelectric activity of CONs. Herein, we report for the first time the preparation of novel composites and their PEC sensing properties by electrostatic self-assembly of ultrathin CONs (called TTPA-CONs) with Ti₃C₂T_x. The prepared TTPA-CONs/Ti₃C₂T_x composites can be used as photocathodes for PEC detection of prostate-specific antigen (PSA) with high sensitivity, low detection limit, and good stability. This work not only expands the application of CONs but also opens new avenues for the development of efficient PEC sensing platforms.

Plasmon-induced hole-depletion layer on p-n heterojunction for highly efficient photoelectrochemical water splitting

The photoelectrocatalytic (PEC) water splitting efficiency of semiconductor photoelectrodes is mainly limited by the effective separation and transfer of photogenerated charges. Zinc indium sulfide-cuprous oxide (ZnIn₂S₄-Cu₂O) p-n heterojunction is constructed to enhance the PEC properties of ZnIn₂S₄. The nickel hydroxide iron oxide (NiFeOOH) layer on the surface of the heterojunction can be used as a hole depletion layer under the induction of plasmon resonance of the most surface silver (Ag) (the holes transferred from Cu₂O valence band to NiFeOOH layer can be excited by Ag to produce hot electron consumption, which makes the last remaining hot holes participate in the water oxidation reaction) to further promote the carrier separation and transfer. The results exhibit that ZnIn₂S₄/Cu₂O/NiFeOOH/Ag photoelectrode with dramatically enhanced photocurrent density of 1.22 mA/cm² at 1.23 V versus the reversible hydrogen electrode (V_RHE), which is 9.4 times higher than the pure ZnIn₂S₄. This work provides a promising concept to design photoelectrodes efficiently in PEC water splitting.

Self-powered photoelectrochemical aptasensor based on MIL-68(In) derived In2O3 hollow nanotubes and Ag doped ZnIn2S4 quantum dots for oxytetracycline detection

A self-powered photoelectrochemical (PEC) aptasensor was constructed based on MIL-68(In) derived indium oxide hollow nanotubes (In₂O₃ HNs) and Ag-doped ZnIn₂S₄ quantum dots (QDs) as sensing matrix for the ultrasensitive detection of oxytetracycline (OTC). The hollow tube structure of the designed photoelectric active platform provided abundant active sites and a larger specific surface area for the immobilization of target recognition unit. The coupling of Ag:ZnIn₂S₄ QDs and In₂O₃ HNs can accelerate the transmit and separation of photoinduced charge, and thus greatly increasing the intensity of photocurrent signal. Then, the well-constructed OTC-aptamer was anchored on the modified photoelectrode as an accurate capturing element, achieving the specific detection of analyte. Under optimal conditions, the photocurrent intensity of the PEC aptasensor decreases linearly, with a linear response range of 10^-4 -10 nmol/L, and a limit of detection (LOD) of 3.3 × 10^-5 nmol/L (S/N = 3). The developed self-powered aptasensor with excellent reproducibility, stability, and selectivity, provides a potential way to detect antibiotic residues in environmental media.

Recent advances in electron manipulation of nanomaterials for photoelectrochemical biosensors

This feature article discusses the recent advances and strategies of building photoelectrochemical (PEC) biosensors from the perspective of regulating the electron transfer of nanomaterials.

Controllable signal molecule release from Au NP-gated MSNs for photocathodic detection of ultralow level AβO

By integrating a target-responsive MSN-based controlled release system with a sensitization-SPR co-enhanced thionine/MoS₂ QDs/Cu NWs photocathode, a highly sensitive split-type PEC aptasensing platform for AβO detection in blood is constructed. Ultralow detection limit (2.1 fM) and high selectivity show great potential in early AD diagnosis.

"Dual Signal-On" Split-Type Aptasensor for TNF-α: Integrating MQDs/ZIF-8@ZnO NR Arrays with MB-Liposome-Mediated Signal Amplification

Ultrasensitive and accurate detection of biomarkers in serum is of great importance for disease diagnosis and treatment. So far, the commonly used single-mode signal suffers from certain instinct drawbacks that restrict assay performances. Herein, we report the proof-of-concept fabrication of a split-type photoelectrochemical (PEC) and electrochemical (EC) dual-modal aptasensor for ultrasensitively tracing tumor necrosis factor-α, a noteworthy biological biomarker with essential clinical importance. By smart integrating molybdenum disulfide QDs/zeolitic imidazolate framework-8@ZnO nanorod arrays with a methylene blue-liposome-mediated signal amplification strategy, "dual signal-on" detection is accomplished based on a sandwich reaction of the target with aptamer-anchored carboxyl magnetic beads and an aptamer-confined MB liposome. Linear ranges of 5 fg/mL-5 μg/mL (detection limit 1.46 fg/mL) for PEC and 10 fg/mL-0.5 μg/mL (detection limit 6.14 fg/mL) for EC are obtained, respectively. An independent signal transduction mechanism supports the accuracy improvement, and a separate biological process from a translator enables convenient fabrication, short-time consumption, wider linearity, as well as outstanding reproducibility and stability in practical application. This work presents a universal bioassay route with prospects in biomedical and related areas.