Aptamer-based nanofilter interface for small-biomarker detection with potentiometric biosensor

Signal transduction interfaces for field-effect transistor-based biosensors

Biosensors based on field-effect transistors (FETs) are suitable for use in miniaturized and cost-effective healthcare devices. Various semiconductive materials can be applied as FET channels for biosensing, including one- and two-dimensional materials. The signal transduction interface between the biosample and the channel of FETs plays a key role in translating electrochemical reactions into output signals, thereby capturing target ions or biomolecules. In this Review, distinctive signal transduction interfaces for FET biosensors are introduced, categorized as chemically synthesized, physically structured, and biologically induced interfaces. The Review highlights that these signal transduction interfaces are key in controlling biosensing parameters, such as specificity, selectivity, binding constant, limit of detection, signal-to-noise ratio, and biocompatibility.

Aptamer-functionalized field-effect transistor biosensors for disease diagnosis and environmental monitoring

Nano-biosensors that are composed of recognition molecules and nanomaterials have been extensively utilized in disease diagnosis, health management, and environmental monitoring. As a type of nano-biosensors, molecular specificity field-effect transistor (FET) biosensors with signal amplification capability exhibit prominent advantages including fast response speed, ease of miniaturization, and integration, promising their high sensitivity for molecules detection and identification. With intrinsic characteristics of high stability and structural tunability, aptamer has become one of the most commonly applied biological recognition units in the FET sensing fields. This review summarizes the recent progress of FET biosensors based on aptamer functionalized nanomaterials in medical diagnosis and environmental monitoring. The structure, sensing principles, preparation methods, and functionalization strategies of aptamer modified FET biosensors were comprehensively summarized. The relationship between structure and sensing performance of FET biosensors was reviewed. Furthermore, the challenges and future perspectives of FET biosensors were also discussed, so as to provide support for the future development of efficient healthcare management and environmental monitoring devices.

Effect of Surface Modification on the Fundamental Electrical Characteristics of Solution-Gated Indium Tin Oxide-Based Thin-Film Transistor Fabricated by One-Step Sputtering

Our solution-gated indium tin oxide (ITO)-based thin-film transistor (TFT) produced by single-step sputtering has great future potential in bioelectronics. In particular, chemical modifications of the ITO channel surface are expected to contribute to biomolecular recognition with ultrahigh sensitivity owing to a remarkably steep subthreshold slope (SS). In this study, we investigate the effect of a chemical modification of an aptamer as a receptor molecule at the ITO channel surface on the electrical characteristics of the solution-gated TFT. In this case, a SARS-CoV-2 aptamer is immobilized using a spacer molecule on an aryl diazonium monolayer that is electrochemically deposited with a radical scavenger. The monolayer is expected to not only passivate the ITO channel surface but also change the electron density in the ITO channel owing to the reduction reaction of aryl diazonium salts. Indeed, the electrochemical deposition of aryl diazonium salts decreases the leakage current through the ITO channel surface and provides a steep SS, which is near the thermal limit at 300 K, owing to the decrease in depletion layer capacitance. After the aptamer immobilization, the leakage current and SS unexpectedly return close to their original values before the surface modifications. This finding indicates that aptamer molecules should be carefully used because their negative charges would attract cations around the detection interface. Eventually, the solution-gated ITO-based TFT with the SARS-CoV-2 aptamer clearly responds to inactivated SARS-CoV-2 particles owing to the successful surface modification.

Aptamer-Based Glycated Albumin Sensor for Capacitive Spectroscopy

Glycated albumin (GA) is a candidate for glycemic indicator to control prediabetes, the half-life of which is about 2 weeks, which is neither too long nor too short, considering that there is no longer any need for daily fingerstick sampling but glucose levels can be controlled in a relatively short term. Its usefulness as a glycemic indicator must be widely recognized by developing a simple and miniaturized GA sensor for point-of-care testing (POCT) devices. In this study, we propose an aptamer-based capacitive electrode for electrochemical capacitance spectroscopy (ECS) to specifically detect GA in an enzyme-/antibody-free manner. As a component of the bioelectrical interface between the sample solution and the electrode, a densely packed capacitive polyaryl film coated on a gold electrode contributes to the detection of GA by the ECS method. In addition, the GA aptamer tethered onto the polyaryl-film-coated gold electrode is useful for not only specifically capturing GA but also inducing changes in the concentration of cations released from the cation/GA aptamer complexes by GA/GA aptamer binding. Also, hydrophilic poly(ethylene glycol) (PEG) coated on the polyaryl film electrode in parallel with the GA aptamer prevents interfering proteins such as human serum albumin (HSA) and immunoglobulin G (IgG) from nonspecifically absorbing on the polyaryl film electrode. Such a GA aptamer-based capacitive electrode produces significant signals of GA against HSA and IgG with the change in GA concentration (0.1, 1, and 10 mg/mL) detected by the ECS method. This indicates that the ECS method contributes to the evaluation of the GA level, which is based on the rate of glycation of albumin. Thus, a platform based on ECS measurement using the aptamer-based capacitive electrode is useful for protein analysis in an enzyme-/antibody-free manner.

Technical Perspectives on Applications of Biologically Coupled Gate Field-Effect Transistors

Biosensing technologies are required for point-of-care testing (POCT). We determine some physical parameters such as molecular charge and mass, redox potential, and reflective index for measuring biological phenomena. Among such technologies, biologically coupled gate field-effect transistor (Bio-FET) sensors are a promising candidate as a type of potentiometric biosensor for the POCT because they enable the direct detection of ionic and biomolecular charges in a miniaturized device. However, we need to reconsider some technical issues of Bio-FET sensors to expand their possible use for biosensing in the future. In this perspective, the technical issues of Bio-FET sensors are pointed out, focusing on the shielding effect, pH signals, and unique parameters of FETs for biosensing. Moreover, other attractive features of Bio-FET sensors are described in this perspective, such as the integration and the semiconductive materials used for the Bio-FET sensors.

A highly parallel DTT/MB-DNA/Au electrochemical biosensor for trace Hg monitoring by using configuration occupation approach and SECM

Environmental pollution and medicine safety have aroused increasing public concerns due to human health. Amongst various contaminants, mercury is of special attention owing to their environmental persistence and biogeochemical recycling and ecological risks. Herein, a simple and highly parallel electrochemical biosensor for Hg determination was designed and investigated. The proposed biosensor was prepared and compared between (1) DTT/MB-DNA/Au with configuration occupation approach and (2) MCH/MB-DNA/Au with passivation approach. According to the combined results of scanning electrochemical microscope (SECM) and Randles-Sevcik equation, the DTT modified electrode exhibited high uniformity on DNA distribution and superb stability on electron transfer in Hg2+ detection. Evidentially, the response value of proposed DTT/MB-DNA/Au was increased from 57.518% to 97.607%, while RSD% between duplicate runs had dropped from 22.658% to 0.223% (n = 3). Moreover, the increased proportion of effective working area was 467.380% compared with general sensors. Besides, DTT concentration, DNA concentration as well as assembly time were optimized, utilizing electrochemical impedance spectroscopy (EIS), Cyclic Voltammetry (CV) and Square Wave Anode Stripping Voltammetry (SWASV). This optimized biosensor exhibited an excellent selectivity toward Hg2+ over Cu2+, As2+, Cd2+, Pb2+, Cr3+, Ni2+ and Zn2+ etc., and the stability of DTT/MB-DNA/Au were at least two times better even after 3 days under room temperature. Also, a linear relation was observed between the peak current and Hg2+concentrations in a range from 0.25 nM to 2.00 μM with a detection limit of 53.00 pM under optimal conditions. Finally, DTT/MB-DNA/Au was applied for plants and medical products analysis. In all, this optimized DTT/MB-DNA/Au with advantages of high repeatability and sensitivity would provide a new insight into the design and application of biosensor for reliable sensing in safeguarding plant protection and medicinal safety.

Free-standing conductive hydrogel electrode for potentiometric glucose sensing

Flexible conductive polymer hydrogels are attracting attention as an electrode material. Electrochemical biosensors with conductive polymer hydrogels have been developed because they have some advantages such as biocompatibility, high conductivity, 3D nanostructure, solvated surface, and enlarged interface. Conductive polymer hydrogels bearing receptor molecules such as enzymes in its 3D nanostructure enable the detection of target analytes with high sensitivity. However, because such hydrogels are fragile, they cannot stand on their own and a supporting substrate is required to fabricate them. This means that the loss of mechanical toughness is detrimental for their application to flexible biosensors. In this study, we have proposed a free-standing conductive hydrogel electrode with no coating on a substrate, which is composed of polyaniline with phenyl boronic acid including polyvinyl alcohol, for potentiometric glucose sensing. In addition, its electrical responsivity to glucose has been confirmed by investigating its mechanical properties at various glucose concentrations, considering the hydrogel compositions.

A free-standing conductive hydrogel electrode with no coating on a substrate is proposed for potentiometric glucose sensing.

Multiscale pore contained carbon nanofiber-based field-effect transistor biosensors for nesfatin-1 detection

Nesfatin-1 (NES1) is a potential biomarker found in serum and saliva that indicates hyperpolarization and depolarization in the hypothalamic ventricle nucleus as well as an increase in epileptic conditions. However, real-time investigations have not been carried out to detect changes in the concentration of NES1. In this study, we develop a multiscale pore contained carbon nanofiber-based field-effect transistor (FET) biosensor to detect NES1. The activated multiscale pore contained carbon nanofiber (a-MPCNF) is generated using a single-nozzle co-electrospinning method and a subsequent steam-activation process to obtain a signal transducer and template for immobilization of bioreceptors. The prepared biosensor exhibits a high sensitivity to NES1. It can detect levels as low as 0.1 fM of NES1, even in the presence of other interfering biomolecules. Furthermore, the a-MPCNF-based FET sensor has significant potential for practical applications in non-invasive real-time diagnosis, as indicated by its sensing performance in artificial saliva.