1
|
Sun X, Lin X, Dong F, Shen M, Liu H, Song Z, Jiang J. Advanced-design cross-linked binder enables high-performance silicon-based anodes through in-situ crosslinking based on sodium carboxymethyl cellulose and poly-lysine. Int J Biol Macromol 2024; 274:133050. [PMID: 38880451 DOI: 10.1016/j.ijbiomac.2024.133050] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2023] [Revised: 05/27/2024] [Accepted: 06/07/2024] [Indexed: 06/18/2024]
Abstract
Practical employment of silicon (Si) electrodes in lithium-ion batteries (LIBs) is limited due to the severe volume changes suffered during charging-discharging process, causing serious capacity fading. Here, a composite polymer (CP-10) containing sodium carboxymethyl cellulose (CMC-Na) and poly-lysine (PL) is proposed for the binder of Si-based anodes, and a multifunctional strategy of "in-situ crosslinking" is achieved to alleviate the severe capacity degradation effectively. A cross-linked three-dimensional (3D) network is established through the strong hydrogen bonding interaction and reversible electrostatic interactions within CP-10, offering favorable mechanical tolerance for the extreme volume expansion of Si. Moreover, hydrogen bonding interaction along with ion-dipole interaction formed between CP-10 and Si surface enhance the bonding capability of Si-based anodes, promoting the maintenance of anodes' integrity. Consequently, over 800 cycles are achieved for the Si@CP-10 at 0.5C while maintaining a fixed discharge specific capacity of 1000 mAh g-1. Moreover, the Si/C@CP-10 can stably operate over 500 cycles with a capacity retention of 77.12 % at 1C. The prolonged cycling lifetime of Si/C and Si anodes suggests great potential for this strategy in promoting the implementation of high-capacity LIBs.
Collapse
Affiliation(s)
- Xingshen Sun
- Institute of Chemical Industry of Forest Products, CAF, Key Lab. of Biomass Energy and Material, Jiangsu Province, Key Lab. of Chemical Engineering of Forest Products, National Forestry and Grassland Administration, National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass, Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing 210042, China; Department of Chemistry and Chemical Engineering, MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, National Forest and Grass Administration Woody Spices (East China) Engineering Technology Research Center, Beijing Forestry University, Beijing 100083, China; Key Laboratory of Green Chemical Technology of Fujian Province University, Department of College of Ecology and Resource Engineering, Wuyi University, Wuyishan 354300, China
| | - Xiangyu Lin
- Institute of Chemical Industry of Forest Products, CAF, Key Lab. of Biomass Energy and Material, Jiangsu Province, Key Lab. of Chemical Engineering of Forest Products, National Forestry and Grassland Administration, National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass, Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing 210042, China
| | - Fuhao Dong
- Institute of Chemical Industry of Forest Products, CAF, Key Lab. of Biomass Energy and Material, Jiangsu Province, Key Lab. of Chemical Engineering of Forest Products, National Forestry and Grassland Administration, National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass, Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing 210042, China
| | - Minggui Shen
- Institute of Chemical Industry of Forest Products, CAF, Key Lab. of Biomass Energy and Material, Jiangsu Province, Key Lab. of Chemical Engineering of Forest Products, National Forestry and Grassland Administration, National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass, Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing 210042, China.
| | - He Liu
- Institute of Chemical Industry of Forest Products, CAF, Key Lab. of Biomass Energy and Material, Jiangsu Province, Key Lab. of Chemical Engineering of Forest Products, National Forestry and Grassland Administration, National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass, Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing 210042, China.
| | - Zhanqian Song
- Institute of Chemical Industry of Forest Products, CAF, Key Lab. of Biomass Energy and Material, Jiangsu Province, Key Lab. of Chemical Engineering of Forest Products, National Forestry and Grassland Administration, National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass, Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing 210042, China
| | - Jianxin Jiang
- Department of Chemistry and Chemical Engineering, MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, National Forest and Grass Administration Woody Spices (East China) Engineering Technology Research Center, Beijing Forestry University, Beijing 100083, China
| |
Collapse
|
2
|
Song Z, Li W, Gao Z, Chen Y, Wang D, Chen S. Bio-Inspired Electrodes with Rational Spatiotemporal Management for Lithium-Ion Batteries. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024:e2400405. [PMID: 38682479 DOI: 10.1002/advs.202400405] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2024] [Revised: 03/16/2024] [Indexed: 05/01/2024]
Abstract
Lithium-ion batteries (LIBs) are currently the predominant energy storage power source. However, the urgent issues of enhancing electrochemical performance, prolonging lifetime, preventing thermal runaway-caused fires, and intelligent application are obstacles to their applications. Herein, bio-inspired electrodes owning spatiotemporal management of self-healing, fast ion transport, fire-extinguishing, thermoresponsive switching, recycling, and flexibility are overviewed comprehensively, showing great promising potentials in practical application due to the significantly enhanced durability and thermal safety of LIBs. Taking advantage of the self-healing core-shell structures, binders, capsules, or liquid metal alloys, these electrodes can maintain the mechanical integrity during the lithiation-delithiation cycling. After the incorporation of fire-extinguishing binders, current collectors, or capsules, flame retardants can be released spatiotemporally during thermal runaway to ensure safety. Thermoresponsive switching electrodes are also constructed though adding thermally responsive components, which can rapidly switch LIB off under abnormal conditions and resume their functions quickly when normal operating conditions return. Finally, the challenges of bio-inspired electrode designs are presented to optimize the spatiotemporal management of LIBs. It is anticipated that the proposed electrodes with spatiotemporal management will not only promote industrial application, but also strengthen the fundamental research of bionics in energy storage.
Collapse
Affiliation(s)
- Zelai Song
- College of Automotive Engineering, Jilin University, Changchun, 130022, China
- National Key Laboratory of Automotive Chassis Integration and Bionic, Jilin University, Changchun, 130022, China
| | - Weifeng Li
- College of Automotive Engineering, Jilin University, Changchun, 130022, China
- National Key Laboratory of Automotive Chassis Integration and Bionic, Jilin University, Changchun, 130022, China
| | - Zhenhai Gao
- College of Automotive Engineering, Jilin University, Changchun, 130022, China
- National Key Laboratory of Automotive Chassis Integration and Bionic, Jilin University, Changchun, 130022, China
| | - Yupeng Chen
- CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety, National Center for Nanoscience and Technology, Beijing, 100190, China
| | - Deping Wang
- General Research and Development Institute, China FAW Corporation Limited, Changchun, 130013, China
| | - Siyan Chen
- College of Automotive Engineering, Jilin University, Changchun, 130022, China
- National Key Laboratory of Automotive Chassis Integration and Bionic, Jilin University, Changchun, 130022, China
| |
Collapse
|
3
|
Guo Y, Wang X, Li B, Shen Y, Shen L, Wu J, Yang J. Oxidized sodium alginate crosslinked silk fibroin composite scaffold for skin tissue engineering. J Biomed Mater Res B Appl Biomater 2022; 110:2667-2675. [PMID: 35757971 DOI: 10.1002/jbm.b.35119] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2022] [Revised: 06/06/2022] [Accepted: 06/17/2022] [Indexed: 12/15/2022]
Abstract
Engineering skin substitutes represent a prospective source of advanced therapy in repairing severe traumatic wounds. Sodium alginate (SA) and silk fibroin (SF) are natural biomaterials, which are widely used in tissue engineering and other fields because of their low price, high safety, and good biocompatibility. However, SA itself degrades slowly, its degradation mode is difficult to control, and the degradation products are difficult to remove from the body because of its high molecular weight. Therefore, the composite scaffolds were prepared by freeze-drying composite technology by using the Schiff base reaction between biocompatible SF and permeable oxidized sodium alginate (OSA). Sodium periodate was used as oxidant to modify SA. The results showed that higher oxidation degree of OSA could be obtained by increasing the proportion of oxidant, and the relative molecular weight of the oxidized products could also be reduced. The composite scaffolds were prepared by using sodium tetraborate as a crosslinking accelerator of the Schiff base reaction between OSA and SF. FT-IR confirmed that the Schiff base group appeared in the material. In vitro biodegradation experiments showed that the biodegradation of the composite scaffolds was controllable, and the cytocompatibility experiment showed that the composite scaffolds had good biocompatibility.
Collapse
Affiliation(s)
- Yajin Guo
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People's Republic of China.,International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, People's Republic of China.,Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Xinyu Wang
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People's Republic of China.,International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, People's Republic of China.,Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan, People's Republic of China.,Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory, Xianhu Hydrogen Valley, Foshan, People's Republic of China
| | - Binbin Li
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People's Republic of China.,International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, People's Republic of China.,Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Ying Shen
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People's Republic of China.,International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, People's Republic of China.,Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Linyi Shen
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People's Republic of China.,Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Jiaxin Wu
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, People's Republic of China.,International School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, People's Republic of China.,Biomedical Materials and Engineering Research Center of Hubei Province, Wuhan University of Technology, Wuhan, People's Republic of China
| | - Jing Yang
- School of Foreign Languages, Wuhan University of Technology, Wuhan, People's Republic of China
| |
Collapse
|
4
|
A novel multi-functional binder based on double dynamic bonds for silicon anode of lithium-ion batteries. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.140620] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
5
|
Self-Healing Systems in Silicon Anodes for Li-Ion Batteries. MATERIALS 2022; 15:ma15072392. [PMID: 35407729 PMCID: PMC9000215 DOI: 10.3390/ma15072392] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/31/2021] [Revised: 03/10/2022] [Accepted: 03/21/2022] [Indexed: 01/17/2023]
Abstract
Self-healing is the capability of materials to repair themselves after the damage has occurred, usually through the interaction between molecules or chains. Physical and chemical processes are applied for the preparation of self-healing systems. There are different approaches for these systems, such as heterogeneous systems, shape memory effects, hydrogen bonding or covalent–bond interaction, diffusion, and flow dynamics. Self-healing mechanisms can occur in particular through heat and light exposure or through reconnection without a direct effect. The applications of these systems display an increasing trend in both the R&D and industry sectors. Moreover, self-healing systems and their energy storage applications are currently gaining great importance. This review aims to provide general information on recent developments in self-healing materials and their battery applications given the critical importance of self-healing systems for lithium-ion batteries (LIBs). In the first part of the review, an introduction about self-healing mechanisms and design strategies for self-healing materials is given. Then, selected important healing materials in the literature for the anodes of LIBs are mentioned in the second part. The results and future perspectives are stated in the conclusion section.
Collapse
|
6
|
Fabrication of polyacrylic acid-based composite binders with strong binding forces on copper foils for silicon anodes in lithium-ion batteries. J IND ENG CHEM 2022. [DOI: 10.1016/j.jiec.2022.02.037] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
7
|
Beheshti SH, Javanbakht M, Omidvar H, Hosen MS, Hubin A, Van Mierlo J, Berecibar M. Development, Retainment and Assessment of the Graphite-Electrolyte Interphase in Li-ion Batteries Regarding the Functionality of SEI-Forming Additives. iScience 2022; 25:103862. [PMID: 35243226 PMCID: PMC8859004 DOI: 10.1016/j.isci.2022.103862] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/02/2022] Open
Abstract
Formation of a decent solid-electrolyte interphase (SEI) is recognized as an approach to improve the performance of lithium-ion batteries. SEI is a passivation layer generated on the anode during the initial cycles. Characteristics of the graphite SEI depend on the operational parameters, state of the anode, and the content of the electrolyte. Introducing reduction-type additives to the carbonate electrolytes has been one of the most practiced methods to generate an effective SEI on carbonous anodes. To track the role of additives in SEI evolution, first, we have presented a general review on what is currently understood about the SEI formation processes and the impacting parameters. In the second step, the most reported methods to study and analyze the functionality of the SEI-forming additives are classified. As the third part, different reduction-type additives are categorized, and their performances are comparatively reviewed.
Collapse
Affiliation(s)
- S. Hamidreza Beheshti
- Mobility, Logistics and Automotive Technology Research Centre (MOBI), Department of Electrical Engineering and Energy Technology, Vrije Universiteit Brussel, Brussels, Belgium
- Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
- Corresponding author
| | - Mehran Javanbakht
- Department of Chemistry, Amirkabir University of Technology, Tehran, Iran
| | - Hamid Omidvar
- Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran
| | - Md Sazzad Hosen
- Mobility, Logistics and Automotive Technology Research Centre (MOBI), Department of Electrical Engineering and Energy Technology, Vrije Universiteit Brussel, Brussels, Belgium
| | - Annick Hubin
- Electrochemical and Surface Engineering Group, Department of Materials and Chemistry, Vrije Universiteit Brussel, Brussels, Belgium
| | - Joeri Van Mierlo
- Mobility, Logistics and Automotive Technology Research Centre (MOBI), Department of Electrical Engineering and Energy Technology, Vrije Universiteit Brussel, Brussels, Belgium
| | - Maitane Berecibar
- Mobility, Logistics and Automotive Technology Research Centre (MOBI), Department of Electrical Engineering and Energy Technology, Vrije Universiteit Brussel, Brussels, Belgium
| |
Collapse
|
8
|
Sahajpal K, Sharma S, Shekhar S, Kumar A, Meena MK, Bhagi AK, Sharma B. Dynamic Protein and Polypeptide Hydrogels Based on Schiff Base Co-assembly for Biomedicine. J Mater Chem B 2022; 10:3173-3198. [DOI: 10.1039/d2tb00077f] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Stimuli-responsive hydrogels are promising building blocks for biomedical devices, attributable to their excellent hydrophilicity, biocompatibility, and dynamic responsiveness to temperature, light, pH, and water content. Although hydrogels find interesting applications...
Collapse
|
9
|
Su TT, Ren WF, Wang K, Yuan JM, Shao CY, Ma JL, Chen XH, Xiao LP, Sun RC. Bifunctional hydrogen-bonding cross-linked polymeric binders for silicon anodes of lithium-ion batteries. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2021.139552] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|