Metal iodides (LiI, MgI2, AlI3, TiI4, and SnI4) potentiality as electrolyte additives for Li−S batteries

The effect of optical-acoustic phonon coupling on the thermal conductivity of 2D MgI2

2D MgI2 has a large phonon band gap and strong coupling of optical and acoustic phonons, and it is difficult to accurately predict thermal conductivity by considering only three-phonon scattering. Thus, in this study, the effect of four-phonon scattering on the thermal conductivity of a 2D MgI2 lattice was investigated using first-principles calculations combined with Boltzmann transport theory. The results show that with increasing temperature, four-phonon scattering induces an increase in the scattering of phonons at the optical and acoustic phonon coupling (2 THz), as well as in the vicinity of the optical phonon branch (4.5 THz), which leads to the enhancement of the anharmonicity of phonon transport and results in a decrease in the thermal conductivity of the 2D material. At 700 K, the thermal conductivity of MgI2 decreases by over half, from 0.47 W m-1 K-1 to 0.23 W m-1 K-1, when considering both three- and four-phonon scattering, compared to considering only three-phonon scattering. This study confirms the need to consider the role of four-phonon scattering to enhance optical and acoustic phonon coupling to accurately predict the thermal conductivity of 2D materials with larger phonon band gaps.

Organic Electrolyte Additive: Dual Functions Toward Fast Sulfur Conversion and Stable Li Deposition for Advanced Li-S Batteries

Lithium-sulfur (Li-S) battery is of great potential for the next generation energy storage device due to the high specific capacity energy density. However, the sluggish kinetics of S redox and the dendrite Li growth are the main challenges to hinder its commercial application. Herein, an organic electrolyte additive, i.e., benzyl chloride (BzCl), is applied as the remedy to address the two issues. In detail, BzCl can split into Bz· radical to react with the polysulfides, forming a Bz-S-Bz intermediate, which changes the conversion path of S and improves the kinetics by accelerating the S splitting. Meanwhile, a tight and robust solid electrolyte interphase (SEI) rich in inorganic ingredients namely LiCl, LiF, and Li2O, is formed on the surface of Li metal, accelerating the ion conductivity and blocking the decomposition of the solvent and lithium polysulfides. Therefore, the Li-S battery with BzCl as the additive remains high capacity of 693.2 mAh g-1 after 220 cycles at 0.5 C with a low decay rate of 0.11%. This work provides a novel strategy to boost the electrochemical performances in both cathode and anode and gives a guide on the electrolyte design toward high-performance Li-S batteries.

Fluorinated Fullerenes as Electrolyte Additives for High Ionic Conductivity Lithium-Ion Batteries

Currently, lithium-ion batteries have an increasingly urgent need for high-performance electrolytes, and additives are highly valued for their convenience and cost-effectiveness features. In this work, the feasibilities of fullerenes and fluorinated fullerenes as typical bis(fluorosulfonyl)imide/1,2-dimethoxymethane (LiFSI/DME) electrolyte additives are rationally evaluated based on density functional theory calculations and molecular dynamic simulations. Interestingly, electronic structures of C60, C60F2, C60F4, C60F6, 1-C60F8, and 2-C60F8 are found to be compatible with the properties required as additives. It is noted that that different numbers and positions of F atoms lead to changes in the deformation and electronic properties of fullerenes. The F atoms not only show strong covalent interactions with C cages, but also affect the C-C covalent interaction in C cages. In addition, molecular dynamic simulations unravel that the addition of trace amounts of C60F4, C60F6, and 2-C60F8 can effectively enhance the Li+ mobility in LiFSI/DME electrolytes. The results expand the range of applications for fullerenes and their derivatives and shed light on the research into novel additives for high-performance electrolytes.

Critical triple roles of sodium iodide in tailoring the solventized structure, anode-electrolyte interface and crystal plane growth to achieve highly reversible zinc anodes for aqueous zinc-ion batteries

Aqueous rechargeable Zn-ion batteries (ARZIBs) are promising for energy storage. However, the Zn dendrite and corrosive reactions on the surface of Zn anode limit the practical uses of ARZIBs. Herein, we present a valid electrolyte additive of NaI, in which I- can modulate the morphology of Zn crystal growth by adsorbing on specific crystal surfaces (002), and guide Zn deposition by inducing a negative charge on the Zn anode. Simultaneously, it enhances the reduction stability of water molecules by participating in the solvation structure of Zn(H2O)62+ by forming ZnI(H2O)5+. At 10 mA cm-2, the assembled Zn symmetrical batteries can run stably over 1,100 h, and the depth of discharge (DOD) can reach 51.3 %. At 1 A g-1, the VO2||Zn full-cell in 2 M ZnCl2 electrolyte with 0.4 M NaI (2 M ZnCl2-0.4 M NaI) maintains of the capacity retention of 75.7 % over 300 cycles. This work offers an insight into inorganic anions as electrolyte additives for achieving stable zinc anodes of ARZIBs.

Catalytic Effects of Electrodes and Electrolytes in Metal-Sulfur Batteries: Progress and Prospective

Metal-sulfur (M-S) batteries are promising energy-storage devices due to their advantages such as large energy density and the low cost of the raw materials. However, M-S batteries suffer from many drawbacks. Endowing the electrodes and electrolytes with the proper catalytic activity is crucial to improve the electrochemical properties of M-S batteries. With regard to the S cathodes, advanced electrode materials with enhanced electrocatalytic effects can capture polysulfides and accelerate electrochemical conversion and, as for the metal anodes, the proper electrode materials can provide active sites for metal deposition to reduce the deposition potential barrier and control the electroplating or stripping process. Moreover, an advanced electrolyte with desirable design can catalyze electrochemical reactions on the cathode and anode in high-performance M-S batteries. In this review, recent progress pertaining to the design of advanced electrode materials and electrolytes with the proper catalytic effects is summarized. The current progress of S cathodes and metal anodes in different types of M-S batteries are discussed and future development directions are described. The objective is to provide a comprehensive review on the current state-of-the-art S cathodes and metal anodes in M-S batteries and research guidance for future development of this important class of batteries.

LiI/Cu Mixed Conductive Interface via the Mechanical Rolling Approach for Stable Lithium Anodes in the Carbonate Electrolyte

The nonuniform ion/charge distribution and slow Li-ion diffusion at the Li metal/electrolyte interface lead to uncontrollable dendrites growth and inferior cycling stability. Herein, a simple mechanical rolling method is introduced to construct a mixed conductive protective layer composed of LiI and Cu on the Li metal surface through the replacement reaction between CuI nanoflake arrays and metallic Li. LiI can promote Li⁺ transportation across the interface, achieving homogeneous Li⁺ flux and suppressing the growth of Li dendrite, while the homogeneously dispersed Cu nanoparticles can offer abundant nucleation sites for Li deposition, resulting in a remarkably homogenized charge distribution. As expected, Li metal with the LiI/Cu protection layer (LiI/Cu@Li) exhibits a significantly prolonged lifespan over 350 h with slight polarization at a deposition capacity of 3 mAh cm^-2 in the carbonate electrolyte. Besides, when matched with high mass loading LiFePO₄ cathodes (20 mg cm^-2), the LiI/Cu@Li anodes exhibit much improved cycle stability and rate performance. Highly scalable preparation processes as well as the impressive electrochemical performances in half cells and full cells indicate the potential application of the LiI/Cu@Li anode.