Highly oriented MIL-101(Cr) continuous films grown on carbon cloth as efficient polysulfide barrier for lithium-sulfur batteries

Metal Organic Frameworks as Polysulfide Reaction Modulators for Lithium Sulfur Batteries: Advances and Perspectives

Currently, lithium sulfur (Li-S) battery with high theoretical energy density has attracted great research interest. However, the diffusion and loss process of intermediate lithium polysulfide during charge-discharge hindered the application of the Li-S battery in modern life. To overcome this issue, metal organic frameworks (MOFs) and their composites have been regarded as effective additions to restrain the LiPS diffusion process for Li-S battery. Benefiting from the unique structure with rich active sites to adsorb LiPS and accelerate the LiPS redox, the Li-S batteries with MOFs modified exhibit superior electrochemical performance. Considering the rapid development of MOFs in Li-S battery, this review summarizes the recent studies of MOFs and their composites as the sulfur host materials, functional interlayer, separator coating layer, and separator/solid electrolyte for Li-S batteries in detail. In addition, the promising design strategies of functional MOF materials are proposed to improve the electrochemical performance of Li-S battery.

Effective removal of acetamiprid and eosin Y by adsorption on pristine and modified MIL-101(Fe)

In this work, the efficacy of two metal-organic frameworks (MIL-101(Fe) and NH2-MIL-101(Fe)) in eliminating acetamiprid (ATP) insecticide and eosin Y (EY) dye from aqueous solution is tested. An analysis was conducted on the developed nanocomposite's optical, morphological, and structural characteristics. The adsorption isotherm, kinetics, thermodynamics, reusability, and mechanisms for ATP and EY dye removal were assessed. NH2-MIL-101(Fe) adsorbed 76% and 90% of ATP pesticide and EY dye, respectively after 10 to 15 min in optimum conditions. For both adsorbents, with regard to explaining the isotherm data, the Langmuir model offered the most accurate description. Moreover, the adsorption of ATP and EY dye is described by the pseudo-second-order kinetic model. The maximum adsorption capacities of ATP and EY dye on MIL-101(Fe) were 57.6 and 48.9 mg/g compared to 70.5 and 97.8 mg/g using NH2-MIL-101(Fe). The greatest amount of ATP and EY dye clearance was obtained at a neutral medium for both adsorbents. The results of this investigation demonstrate the effectiveness of MIL-101(Fe) and NH2-MIL-101(Fe) as effective substances in the adsorption process for removing pesticides and dyes from aqueous solution.

Advanced cathodic free-standing interlayers for lithium-sulfur batteries: understanding, fabrication, and modification

In the past decades, lithium-sulfur batteries (LSBs) have demonstrated huge practical potential due to their ultrahigh theoretical specific capacity, low price, and environmental friendliness. However, LSBs are still faced with the problems of volumetric expansion, slow reaction kinetics, and short working life due to the shuttling of polysulfides. The introduction of a free-standing interlayer is a good way to solve the problems because of the physical confinement, chemical entrapment, and conversion. This review summarizes the common fabrication methods of free-standing interlayers, including the power-originated and film-originated methods. The modification of the as-prepared free-standing interlayers is also accomplished into physical treatment, atomic doping, and compound introduction. Finally, we conclude and compare the different fabrication methods of free-standing interlayers and their modifications and put forward the outlook of the high-performance free-standing interlayers.

Thiol-Containing Metal-Organic Framework-Decorated Carbon Cloth as an Integrated Interlayer-Current Collector for Enhanced Li-S Batteries

Lithium-sulfur (Li-S) batteries hold great promise for new-generation energy storage technologies owing to their overwhelming energy density. However, the poor conductivity of active sulfur and the shuttle effect limit their widespread use. Herein, a carbon cloth decorated with thiol-containing UiO-66 nanoparticles (CC@UiO-66(SH)₂) was developed to substitute the traditional interlayer and current collector for Li-S batteries. One side of CC@UiO-66(SH)₂ acts as a current collector to load active materials, while the other side serves as an interlayer to further restrain polysulfide shuttling. This two-in-one integrated architecture endows the sulfur cathode with fast electron/ion transport and efficient chemical confinement of polysulfides. More importantly, rich thiol groups in the pores of UiO-66(SH)₂ serve to tether polysulfides by both covalent interactions and lithium bonding. Therefore, the Li-S battery equipped with this integrated interlayer-current collector not only delivers an enhanced specific capability (1209 mAh g^-1 at 0.1 C) but also exhibits prominent cycling stability (an attenuation rate of 0.037% per cycle for 1000 cycles at 1 C). Meanwhile, the battery achieves a high discharge capacity of 795 mAh g^-1 at a sulfur loading of 3.83 mg cm^-2. The new metal-organic framework (MOF)-based electrode material reported in this study undoubtedly provides insights into the exploration of functional MOFs for robust Li-S batteries.

Constructing MIL-101(Cr) membranes on carbon nanotube films as ion-selective interlayers for lithium-sulfur batteries

It is of significant importance to suppress the polysulfide shuttle effect for the commercial application of lithium-sulfur batteries. Herein, continuous MIL-101(Cr) membranes were successfully fabricated on carbon nanotube films utilizing a simplein situgrowth method, aiming at constructing interlayer materials for inhibiting the shuttle effect. Owing to the suitable pore aperture and super electrolyte wettability, the as-developed MIL-101(Cr) membrane can effectively inhibit the shuttle behaviour of polysulfides while allowing the fast transport of Li-ions simultaneously, working as an ionic sieve. Additionally, this MOFs membrane is also helpful in accelerating the polysulfide catalytic conversion. Therefore, the proposed interlayer delivers an extraordinary rate capability, showing a remarkable capacity of 661.9 mAh g^-1under 5 C. Meanwhile, it also exhibits a high initial capacity of 816.1 mAh g^-1at 1 C and an exceptional durability with an extremely low capacity fading of 0.046% per cycle over 500 cycles.

Tessellated N-doped carbon/CoSe2 as trap-catalyst sulfur hosts for room-temperature sodium-sulfur batteries

The construction of highly conductive structure with excellent adsorption-catalytic properties to accelerate electron transfer and suppress polysulfides shuttle is considered as an effective strategy to achieve well-behaved sodium-sulfur batteries. Herein,...