Preparation of nanosheet-based spherical Ti/SnO2-Sb electrode by in-situ hydrothermal method and its performance in the degradation of methylene blue

Characterization and electrochemical properties of TiO2-rNTs/SnO2-Sb/PbO2 electrodes for the mineralization of persistent organic pollutants using anodic oxidation coupled Electro-Fenton treatment: Effect of precursor selection

The present study compares the effect of using different solvents on the electrochemical properties of the reduced TiO2 nanotubes (TiO2-rNTs) layered Ti/TiO2-rNTs/SnO2-Sb/PbO2 anodes. The electrodes are prepared using three different solvent-based precursors: (i) isopropanol, (ii) ethylene glycol and citric acid (Pechini method), and (iii) 2-hydroxyethylammonium acetate (2HEAA) ionic liquid (IL) via the thermal decomposition route. The decomposition mechanism of precursor solutions was explored using the thermogravimetric (TGA) analysis. Further, the physicochemical properties of the electrodes are examined using Field emission Scanning Electron microscopy (FE-SEM), X-ray diffraction spectroscopy (XRD), and X-ray photoelectron emission spectroscopy (XPS). The results revealed that solvents with higher viscosity and slower decomposition rates support better film uniformity and higher stability of the electrode. The TiO2 -rNTs bottom layer and PbO2 top layer helped obtain higher film stability, increased working potential window (2.2 V vs. SHE) of the electrode, and the repeatability of the results. The performance of different electrodes based on the precursor solution is found as IL ≫ Pechini > Isopropanol. 4-chlorophenol (4-CP) is used as a model pollutant to test the performance of IL-Ti/TiO2-rNTs/SnO2-Sb/PbO2 anode in an anodic oxidation (AO) coupled electro-Fenton (EF) treatment. Further, the reliability of the electrode is evaluated by mineralizing other persistent organic pollutants (POPs) like tetracyclin, phenol, 2-chlorophenol (2-CP), and 2,4-dichlorophenol (2,4-DCP). Under the optimized conditions, the proposed system was able to mineralize the tetracyclin, phenol, 2-CP, 2,4-DCP, and 4-CP up to 78.91, 82.07, 74.96, 78.78, and 69.3 %, respectively. Moreover, the degradation mechanism of chlorophenols is proposed.

One-step synthesis of Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes used to degrade nitrobenzene

Ti/SnO2-Sb electrodes possess high catalytic activity and efficiently degrade nitrobenzene (NB); however, their low service life limits their wide application. In this study, we used one-step hydrothermal synthesis to successfully prepare Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were applied to characterize the surface morphology, microstructure, and chemical composition of the electrodes, respectively. The electrochemical activity and stability of the electrodes were characterized via linear sweep and cyclic voltammetry, electrochemical impedance spectroscopy, and an accelerated service life test; their performance for NB degradation was also studied. An appropriate amount of Pt-Nd co-doping refined the average grain size of SnO2 and formed a uniform and compact coating on the electrode surface. The oxygen evolution potential, total voltammetric charge, and electron transfer resistance of the Ti/SnO2-Sb-Nd-Pt electrodes were 1.88 V, 3.77 mC/cm2, and 11.50 Ω, respectively. Hydroxy radical was the main active radical species during the electrolytic degradation of nitrobenzene with Ti/SnO2-Sb-Nd-Pt. After Pt-Nd co-doping, the accelerated service life of the electrodes was extended from 8.0 min to 78.2 h (500 mA/cm2); although the NB degradation rate decreased from 94.1 to 80.6%, the total amount of theoretical catalytic degradation of NB in the effective working time increased from 17.4 to 8754.1 mg/cm2. These findings reveal good application potential for the electrodes and provide a reference for developing efficient and stable electrode materials.

Electrochemical mechanism of synchronous ammonia and nitrate removal based on multi-objective optimization by coupling random forest with genetic algorithm

In this work, an electrochemical system was constructed for the simultaneous elimination of ammonia and nitrate using the prepared Ti foam/SnO2-Sb anode and a Cu foam cathode. The hybrid RF-GA method is proposed as a tool for the analysis and optimization of the simultaneous removal of ammonia and nitrate. The influence of independent variables including NaCl concentration, time, and current densities was studied. Results showed that the random forest (RF) model could successfully predict the behavior of electrochemical systems (R2 = 0.9751, RMSE = 0.4567 for the ammonia prediction model; R2 = 0.9772, RMSE = 0.0436 for the nitrate prediction model). The variable importance measures (VIM) analysis reveals that time has the maximum influence on the degradation rate of ammonia and nitrate. The RF model is used as an objective function for the genetic algorithm (GA) to determine the optimum conditions in combination with the calculated specific energy consumption. Based on the optimization results, the removal rates of ammonia and nitrate reach 94.4 % and 74.7 %, respectively, with a minimum specific energy consumption of 0.181 kwh·g-1. The electrochemical reaction mechanism of the composite pollutants in the Ti foam/SnO2-Sb and Cu foam electrode system is further elucidated. The results indicate that nitrate is reduced to nitrite, ammonia, or nitrogen gas at the cathode, accompanied by the mutual transformation of Cu(0), Cu(I), and Cu(II) on the Cu electrode. Ammonia is oxidized to nitrogen gas or nitrate at the anode. Ultimately, the nitrogen-containing composite pollutant is decomposed and discharged as nitrogen gas by cyclic redox reactions.

Robust Self-Supported SnO2-Mn2O3@CC Electrode for Efficient Electrochemical Degradation of Cationic Blue X-GRRL Dye

Exploration of highly efficient and robust catalyst is pivotal for electrocatalytic degradation of dye wastewater, but it still is a challenge. Here, we develop a three-dimensional self-supported SnO₂-Mn₂O₃ hybrid nanosheets grown on carbon cloth (noted by SnO₂-Mn₂O₃@CC) electrode via a simple hydrothermal method and annealing treatment. Benefitting from the interlaced nanosheets architecture that enlarges the surface area and the synergetic component effect that accelerates the interfacial electronic transfer, SnO₂-Mn₂O₃@CC electrode exhibits a superior electrocatalytic degradation efficiency for cationic blue X-GRRL dye in comparison with the single metal oxide electrode containing SnO₂@CC and Mn₂O₃@CC. The degradation efficiency of cationic blue X-GRRL on SnO₂-Mn₂O₃@CC electrode can reach up to 97.55% within 50 min. Furthermore, self-supported architecture of nanosheets on carbon cloth framework contributes to a robust stability compared with the traditional electrode via the multiple dip/brush coating accompanied by the thermal decomposition method. SnO₂-Mn₂O₃@CC electrode exhibits excellent recyclability, which can still retain a degradation efficiency of 94.12% after six cycles. This work may provide a new pathway for the design and exploration of highly efficient and robust electrooxidation catalysts for dye degradation.

Novel Sb-SnO2 Electrode with Ti3+ Self-Doped Urchin-Like Rutile TiO2 Nanoclusters as the Interlayer for the Effective Degradation of Dye Pollutants

Stable and efficient SnO₂ electrodes are very promising for effectively degrading refractory organic pollutants in wastewater treatment. In this regard, we firstly prepared Ti³⁺ self-doped urchin-like rutile TiO₂ nanoclusters (TiO_2-x NCs) on a Ti mesh substrate by hydrothermal and electroreduction to serve as an interlayer for the deposition of Sb-SnO₂ . The TiO_2-x NCs/Sb-SnO₂ anode exhibited a high oxygen evolution potential (2.63 V vs. SCE) and strong ⋅OH generation ability for the enhanced amount of absorbed oxygen species. Thus, the degradation results demonstrated its good rhodamine B (RhB), methylene blue (MB), alizarin yellow R (AYR), and methyl orange (MO) removal performance, with the rate constant increased 5.0, 1.9, 1.9, and 4.7 times, respectively, compared to the control Sb-SnO₂ electrode. RhB and AYR degradation mechanisms are also proposed based on the results of high-performance liquid chromatography coupled with mass spectrometry and quenching experiments. More importantly, this unique rutile interlayer prolonged the anode lifetime sixfold, given its good lattice match with SnO₂ and the three-dimensional concave-convex structure. Consequently, this work paves a new way for designing the crystal form and structure of the interlayers to obtain efficient and stable SnO₂ electrodes for addressing dye wastewater problems.

Electrochemical degradation of indigo carmine, P-nitrosodimethylaniline and clothianidin on a fabricated Ti/SnO2-Sb/Co-βPbO2 electrode: Roles of radicals, water matrices effects and performance

In this study, the kinetic degradation of several typical organic pollutants was performed on a synthetic electrode (Ti/SnO₂-Sb/Co-βPbO₂). The surface structure and the electrochemical properties of the prepared electrode were investigated, confirming the successful preparation of the electrode using an electrochemical deposition method. The outer layer (Co-βPbO₂) played an important role in reducing the resistance of the electrode and improving its degradation efficiency. The results showed that indigo carmine (IC), p-nitrosodimethylaniline (RNO), and clothianidin (CLO) were effectively degraded within 20 min of electrolysis. Their degradation in the electrochemical process followed the first-order kinetic model with the degradation rate constant of IC being higher than that of RNO and CLO. This was proved by the difference in the reactivity of the target pollutants toward oxidizing radicals (i.e., •OH, SO₄^•-, and Cl•). Their second-order rate constant towards radicals were in the range of 10⁹ - 10¹⁰ M^-1 s^-1 with the highest value being that for IC: k_·OH,IC = 15.1 × 10⁹ M^-1 s^-1 and [Formula: see text]  = 7.4 × 10⁹ M^-1 s^-1. The study calculated the contribution of some oxidizing species, including direct electron transfer (DET), •OH, SO₄^•-, and other reactive oxygen species (ROS). Solution pH, supporting electrolyte, and water matrix affected the degradation efficiency of pollutants and the contribution of the oxidizing species. Br^- and I^- ions enhanced the degradation rate of organic pollutants, while Fe²⁺, HCO₃^-, and humic acid (HA) reduced it. In addition, the toxicity, total organic carbon (TOC) removal, mineralization current efficiency (MCE), energy consumption, recyclability and stability of the prepared electrode were studied, suggesting that the prepared Ti/SnO₂-Sb/Co-βPbO₂ is a good candidate for treating organic pollutants using the electrochemical oxidation process.

Electrochemical degradation of methylene blue by Pb modified porous SnO2 anode

A significant number of pollutants in wastewater can be electrocatalytically oxidized by SnO₂-Sb, a relatively inactive electrode. However, the arduous process of environmental remediation due to poor electrochemical performance and short service life of the traditional Ti/SnO₂-Sb electrode. In this work the SnO₂ electrode with a micron-sized sphere structure was prepared by in-situ hydrothermal. The results of the study that the electrode (Pb-10%) synthesized from the precursor solution in which the Pb:Sn molar ratio is 10% exhibits excellent electrooxidation properties. Impressiveing, the Pb-10% electrode displayed the small charge transfer resistance (10.71 Ω) and the high oxygen evolution potential (2.26 V vs. SCE). Thus, the electrochemical degradation experiment demonstrates that 100 mg L^-1 MB was degraded by Pb-10% electrode under the condition of initial pH = 5, and the decolorization rate reached 94.6%. Moreover, the influence of different parameters such as Pb doping amount, initial pH value of solution, initial concentration of MB and inorganic ions on degradation efficiency were also explored, in turn the practical application of electrodes in the field of purifying water resources is optimized. It is worth noting that the service life of the optimized electrode (100 mA cm^-2, 0.5 M H₂SO₄, 90 h) is about 12 times longer than that of the bare electrode (Sn-Sb). Therefore, the high-performance Ti/SnO₂-Sb electrode prepared in this work possesses vast application prospects in the electrocatalytic oxidation.

Wastewater Treatment by Polymeric Microspheres: A Review

This review addresses polymer microspheres used as adsorbent for wastewater treatment. The removal of various pollutants (including dyes, heavy metal ions, and organic pollutants) is a prominent issue, as they can cause severe health problems. Porous microspheres can provide large specific area and active sites for adsorption or photo degradation. Enhancement in performance is achieved by various modifications, such as the introduction of nanoparticles, magnetic particles, and ZIF-8. Some microspheres were synthesized from synthetic polymers such as vinylic polymer and polydopamine (PDA) through a facile fabrication process. Natural polymers (such as cellulose, alginate, and chitosan) that are biodegradable and eco-friendly are also used. The adsorbents used in industrial application require high adsorption capacity, thermal stability, and recyclability. Batch adsorption experiments were conducted to investigate the optimal conditions, influence of related factors, and adsorption capacities. Insights regarding the adsorption mechanisms were given from the kinetic model, isotherm model, and various characterization methods. The recyclability is investigated through regeneration ratio, or their maintenance of their capability through repeated adsorption-desorption cycles. The high potential of polymer microsphere for the removal of pollutants from wastewater is shown through the high adsorption capacities, environmentally friendliness, and high stability.

Influence of Cu–Zn co-doping on the degradation performance of a Ti/SnO2–Sb anode

A Ti/SnO2–Sb–Cu–Zn electrode was prepared for the electrocatalytic oxidation of Acid Red 18 (AR18).