Defect engineering of TiNb2O7 compound for enhanced Li-ion battery anode performances

Delocalized electronic engineering of TiNb2O7 enables low temperature capability for high-areal-capacity lithium-ion batteries

High areal capacity and low-temperature ability are critical for lithium-ion batteries (LIBs). However, the practical operation is seriously impeded by the sluggish rates of mass and charge transfer. Herein, the active electronic states of TiNb2O7 material is modulated by dopant and O-vacancies for enhanced low-temperature dynamics. Femtosecond laser-based transient absorption spectroscopy is employed to depict carrier dynamics of TiNb2O7, which verifies the localized structure polarization accounting for reduced transport overpotential, facilitated electron/ion transport, and improved Li+ adsorption. At high-mass loading of 10 mg cm-2 and -30 °C, TNO-x@N microflowers exhibit stable cycling performance with 92.9% capacity retention over 250 cycles at 1 C (1.0-3.0 V, 1 C = 250 mA g-1). Even at -40 °C, a competitive areal capacity of 1.32 mAh cm-2 can be achieved. Such a fundamental understanding of the intrinsic structure-function put forward a rational viewpoint for designing high-areal-capacity batteries in cold regions.

"Fast-Charging" Anode Materials for Lithium-Ion Batteries from Perspective of Ion Diffusion in Crystal Structure

"Fast-charging" lithium-ion batteries have gained a multitude of attention in recent years since they could be applied to energy storage areas like electric vehicles, grids, and subsea operations. Unfortunately, the excellent energy density could fail to sustain optimally while lithium-ion batteries are exposed to fast-charging conditions. In actuality, the crystal structure of electrode materials represents the critical factor for influencing the electrode performance. Accordingly, employing anode materials with low diffusion barrier could improve the "fast-charging" performance of the lithium-ion battery. In this Review, first, the "fast-charging" principle of lithium-ion battery and ion diffusion path in the crystal are briefly outlined. Next, the application prospects of "fast-charging" anode materials with various crystal structures are evaluated to search "fast-charging" anode materials with stable, safe, and long lifespan, solving the remaining challenges associated with high power and high safety. Finally, summarizing recent research advances for typical "fast-charging" anode materials, including preparation methods for advanced morphologies and the latest techniques for ameliorating performance. Furthermore, an outlook is given on the ongoing breakthroughs for "fast-charging" anode materials of lithium-ion batteries. Intercalated materials (niobium-based, carbon-based, titanium-based, vanadium-based) with favorable cycling stability are predominantly limited by undesired electronic conductivity and theoretical specific capacity. Accordingly, addressing the electrical conductivity of these materials constitutes an effective trend for realizing fast-charging. The conversion-type transition metal oxide and phosphorus-based materials with high theoretical specific capacity typically undergoes significant volume variation during charging and discharging. Consequently, alleviating the volume expansion could significantly fulfill the application of these materials in fast-charging batteries.

Bulk Modification of Porous TiNb2 O7 Microsphere to Achieve Superior Lithium-Storage Properties at Low Temperature

TiNb2 O7 , as a promising alternative of Li4 Ti5 O12 , exhibits giant potential as low-temperature anode due to its higher theoretical capacity and comparable structural stability. However, the sluggish electronic conductivity still remains a challenge. Herein, bulk modification of Cu+ doping in porous TiNb2 O7 microsphere is proposed via a simple one-step solvothermal method with subsequent calcination treatment. The results show that the electronic conductivity is improved effectively due to the reduced band gap after doping, while enhanced lithium-ion diffusion is achieved benefiting from the increased interplanar spacing. Therefore, the optimal sample of Cu0.06 Ti0.94 Nb2 O7 exhibits a high reversible capacity of 244.4 mA h g-1 at 100 mA g-1 after 100 cycles, superior rate capability, and long-term cycling stability at 1000 mA g-1 at room temperature. Particularly, it can also display good performance in a wide temperature range from 25 to -30 °C, including a reversible capacity of 76.6 mA h g-1 at -20 °C after 200 cycles at 200 mA g-1 . Moreover, Cu0.06 Ti0.94 Nb2 O7 //LiFePO4 full cell can deliver a high reversible capacity of 177.5 mA h g-1 at 100 mA g-1 . The excellent electrochemical properties at both ambient and low-temperatures demonstrate the great potential of Cu+ -doped TiNb2 O7 in energy-storage applications.