Diphenyl diselenide as a bifunctional electrolyte additive in a high-voltage LiNi0.8Mn0.1Co0.1O2/graphite battery

Borate-Functionalized Disiloxane as Effective Electrolyte Additive for 4.5 V LiNi0.8Co0.1Mn0.1O2/Graphite Batteries

Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) is considered the most prominent cathode material to establish a practical high energy density of lithium-ion batteries (LIBs) for future electric vehicles. The energy density of LIBs is greatly determined by the capacity of electrode materials and the operating voltage of the cells. To further improve the cycle lifespan of NCM811 batteries to meet the requirement of driving range for the electric vehicle market, it is vital to design a novel electrolyte additive that can enhance the stability of the cathode/electrolyte interface at a wide range of voltage. Herein, a novel borate functionalized disiloxane compound, 1,1,1,3,3-pentamethyl-3-(3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)propyl) disiloxane (PMBPDS), is synthesized as cathode electrolyte interphase (CEI) film-forming additive to improve the cycling performance of NCM811 batteries. Systematic studies reveal that PMBPDS can construct a stable CEI film on the NCM811 surface and efficiently scavenge hydrofluoric acid (HF). The PMBPDS-derived CEI prevents the dissolution of transmission metals in the NCM811 cathode and enhances the capacity retention of NCM811/graphite cells from 68.3 to 70.6% after 200 cycles at 1 C in the voltage window of 3-4.5 V. This work provides more understanding on designing the molecular structure of additive compounds for improving the electrochemical performance of LIBs.

Sulfur-Rich Additive-Induced Interphases Enable Highly Stable 4.6 V LiNi0.5 Co0.2 Mn0.3 O2 ||graphite Pouch Cells

High-voltage lithium-ion batteries (LIBs) have attracted great attention due to their promising high energy density. However, severe capacity degradation is witnessed, which originated from the incompatible and unstable electrolyte-electrode interphase at high voltage. Herein, a robust additive-induced sulfur-rich interphase is constructed by introducing an additive with ultrahigh S-content (34.04 %, methylene methyl disulfonate, MMDS) in 4.6 V LiNi0.5 Co0.2 Mn0.3 O2 (NCM523)||graphite pouch cell. The MMDS does not directly participate the inner Li+ sheath, but the strong interactions between MMDS and PF6 - anions promote the preferential decomposition of MMDS and broaden the oxidation stability, facilitating the formation of an ultrathin but robust sulfur-rich interfacial layer. The electrolyte consumption, gas production, phase transformation and dissolution of transition metal ions were effectively inhibited. As expected, the 4.6 V NCM523||graphite pouch cell delivers a high capacity retention of 87.99 % even after 800 cycles. This work shares new insight into the sulfur-rich additive-induced electrolyte-electrode interphase for stable high-voltage LIBs.

Fluorinated High-Voltage Electrolytes To Stabilize Nickel-Rich Lithium Batteries

As state-of-the-art (SOA) lithium-ion (Li-ion) batteries approach their specific energy limit (∼250 Wh kg-1), layer-structured, nickel-rich (Ni-rich) lithium transition metal oxide-based cathode materials, e.g., LiNi0.8Mn0.1Co0.1O2 (NMC811), have attracted great interest owing to their practical high specific capacities (>200 mAhg-1). Coupled with their high average discharge voltages (∼4 V vs Li/Li+), Ni-rich cathode-based lithium batteries possess a great potential to achieve much higher specific energies (>350 Wh kg-1 at the cell level) than the SOA Li-ion counterparts. In addition, Ni-rich oxides are low-cost battery cathode materials due to their low cobalt contents. However, Ni-rich cathode-based lithium batteries suffer quick capacity degradations upon cycling, particularly at high upper cutoff voltages (e.g., ≥4.5 V vs Li/Li+), due to crystal structure changes of the active cathode materials and parasitic side reactions at the electrolyte/electrode interfaces. In this study, a fluorinated-solvent-based, high-voltage stable electrolyte (HVE), i.e., 1 M Li bis(trifluoromethanesulfonyl)imide (LiTFSI) in fluoroethylene carbonate (FEC), bis(2,2,2-trifluoroethyl) carbonate (FDEC), and methyl (2,2,2-trifluoroethyl) carbonate (FEMC) with Li difluoro(oxalate)borate (LiDFOB) additive, was formulated and evaluated in Li/NMC811 battery cells. To the best of our knowledge, this class of electrolyte has not been investigated for Ni-rich cathode-based lithium batteries. Li/NMC811 cells with HVE exhibited a superior long-term cycle performance stability, maintaining ∼80% capacity after ∼500 cycles at a high cutoff voltage of 4.5 V (vs Li/Li+) than a baseline carbonate-solvent-based electrolyte (BE). The superior cycle stability of the Li/NMC811 cells is attributed to the inherently high-voltage stability of HVE, supported by the physical and electrochemical analyses. This conclusion is supported by our density functional theory (DFT) modeling where HVE shows a less tendency of deprotonation/oxidation than BE, leading to the observed cycle stability. The findings in this study are important to help tackle the technical challenges facing Ni-rich cathode-based lithium batteries to realize their high energy density potentials with a long cycle life.

Organosulfur Materials for Rechargeable Batteries: Structure, Mechanism, and Application

Lithium-ion batteries have received significant attention over the last decades due to the wide application of portable electronics and increasing deployment of electric vehicles. In order to further enhance the performance of the batteries and overcome the capacity limitations of inorganic electrode materials, it is imperative to explore new cathode and functional materials for rechargeable lithium batteries. Organosulfur materials containing sulfur-sulfur bonds as a kind of promising organic electrode materials have the advantages of high capacities, abundant resources, tunable structures, and environmental benignity. In addition, organosulfur materials have been widely used in almost every aspect of rechargeable batteries because of their multiple functionalities. This review aims to provide a comprehensive overview on the development of organosulfur materials including the synthesis and application as cathode materials, electrolyte additives, electrolytes, binders, active materials in lithium redox flow batteries, and other metal battery systems. We also give an in-depth analysis of structure-property-performance relationship of organosulfur materials, and guidance for the future development of organosulfur materials for next generation rechargeable lithium batteries and beyond.