High-performance gas-diffusion electrodes for H2O2 electrosynthesis

Boosting the O2-to-H2O2 Selectivity Using Sn-Doped Carbon Electrocatalysts: Towards Highly Efficient Cathodes for Actual Water Decontamination

The high cost and often complex synthesis procedure of new highly selective electrocatalysts (particularly those based on noble metals) for H2O2 production are daunting obstacles to penetration of this technology into the wastewater treatment market. In this work, a simple direct thermal method has been employed to synthesize Sn-doped carbon electrocatalysts, which showed an electron transfer number of 2.04 and outstanding two-electron oxygen reduction reaction (ORR) selectivity of up to 98.0 %. Physicochemical characterization revealed that this material contains 1.53 % pyrrolic nitrogen, which is beneficial for the production of H2O2, and -C≡N functional group, which is advantageous for H+ transport. Moreover, the high volume ratio of mesopores to micropores is known to favor the quick escape of H2O2 from the electrode surface, thus minimizing its further oxidation. A purpose-made gas-diffusion electrode (GDE) was prepared, yielding 20.4 mM H2O2 under optimal electrolysis conditions. The drug diphenhydramine was selected for the first time as model organic pollutant to evaluate the performance of an electrochemical advanced oxidation process. In conventional electro-Fenton process (pH 3), complete degradation was achieved in only 15 min at 10 mA cm-2, whereas at natural pH 5.9 and 33.3 mA cm-2, almost overall drug removal was reached in 120 min.

Hydrogen peroxide electrogeneration from O2 electroreduction: A review focusing on carbon electrocatalysts and environmental applications

Hydrogen peroxide (H2O2) stands as one of the foremost utilized oxidizing agents in modern times. The established method for its production involves the intricate and costly anthraquinone process. However, a promising alternative pathway is the electrochemical hydrogen peroxide production, accomplished through the oxygen reduction reaction via a 2-electron pathway. This method not only simplifies the production process but also upholds environmental sustainability, especially when compared to the conventional anthraquinone method. In this review paper, recent works from the literature focusing on the 2-electron oxygen reduction reaction promoted by carbon electrocatalysts are summarized. The practical applications of these materials in the treatment of effluents contaminated with different pollutants (drugs, dyes, pesticides, and herbicides) are presented. Water treatment aiming to address these issues can be achieved through advanced oxidation electrochemical processes such as electro-Fenton, solar-electro-Fenton, and photo-electro-Fenton. These processes are discussed in detail in this work and the possible radicals that degrade the pollutants in each case are highlighted. The review broadens its scope to encompass contemporary computational simulations focused on the 2-electron oxygen reduction reaction, employing different models to describe carbon-based electrocatalysts. Finally, perspectives and future challenges in the area of carbon-based electrocatalysts for H2O2 electrogeneration are discussed. This review paper presents a forward-oriented viewpoint of present innovations and pragmatic implementations, delineating forthcoming challenges and prospects of this ever-evolving field.

Singlet oxygen generation for selective oxidation of emerging pollutants in a flow-by electrochemical system based on natural air diffusion cathode

The decay of free radicals involved in side reactions is one of the challenges faced by electrochemical degradation of organic pollutants. To this end, a non-radical oxidation system was constructed by a natural air diffusion cathode (ADC) and a Ti-based dimensional stable anode coated by RuO₂ (RuO₂-Ti anode) for cathodic hydrogen peroxide activation by anodic chlorine evolution. The ADC fabricated by the carbon black of BP2000 produced a stable concentration of hydrogen peroxide of 339.94 mg L^-1 (current efficiency of 73.4%) without aeration, which was superior to the cathode made by the XC72 carbon black. The flow-by ADC-RuO₂ system consisted of an ADC and a RuO₂-Ti anode showed high selectivity to aniline (AN) compared to benzoate (BA) in a NaCl electrolyte, whose degradation efficiencies were 97.72% and 1.3%, respectively. Rapid degradations of a mixture of emerging pollutants and AN were also observed in the ADC-RuO₂ system, with pseudo-first-order kinetic constants of 0.51, 1.29, 0.89, and 0.99 min^-1 for Bisphenol A (BPA), tetracycline (TC), sulfamethoxazole (SMX) and AN, respectively. Quenching experiments revealed the main reactive oxygen species for the pollutant degradation was singlet oxygen (¹O₂), which was also identified by the electron spin resonance (ESR) analysis. Finally, the steady-stable content of ¹O₂ was quantitatively determined to be 6.25 × 10^-11 M by the method of furfuryl alcohol (FFA) probe. Our findings provide a fast, low energy consumption and well controlled electrochemical oxidation method for selective degradation of organic pollutants. H₂O₂ generated on an air diffusion cathode by naturally diffused O₂, reacts with ClO^- produced from chloride oxidation on the RuO₂-Ti anode to form singlet oxygen (¹O₂). The electrochemical system shows an efficient oxidation to electron-rich emerging pollutants including bisphenol A, tetracycline, sulfamethoxazole and aniline, but a poor performance on the electron-deficient compounds (e.g., benzoate).