Investigation of using graphite nanofluids to promote methane hydrate formation: Application to solidified natural gas storage

A Review of the Effect of Porous Media on Gas Hydrate Formation

Most gas hydrates on the earth are in sediments and permafrost areas, and porous media are often used industrially as additives to improve gas hydrate formation. For further understanding its exploration and exploitation under natural conditions and its application in industry, it is necessary to study the effect of porous media on hydrate formation. The results show that the stacked porous media affects the phase equilibrium of hydrate formation depending on the competition water activity and large specific surface areas, while integrated porous media, such as metal foam, can transfer the hydration heat rapidly and moderate the hydrate phase equilibrium. A supersaturated metal-organic framework is able to significantly improve gas storage performance and can be used as a new material to promote hydrate formation. However, the critical particle size should be studied further for approaching the best promotion effect. In addition, together with the kinetic accelerators, porous media has a synergistic effect on gas hydrate formation. The carboxyl and hydroxyl groups on the surface of porous media can stabilize hydrate crystals through hydrogen bonding. However, the hydroxyl radicals on the silica surface inhibit the combination of CH₄ and free water, making the phase equilibrium conditions more demanding.

Research progress on the effects of nanoparticles on gas hydrate formation

Gas hydrate has great application potential in gas separation, energy storage, seawater desalination, etc. However, the intensity of mass and heat transfer is not enough to meet the needs of efficient hydrate synthesis. Nanoparticles, different from other liquid chemical additives, are considered as effective additives to promote hydrate formation due to their rich specific surface area and excellent thermal conductivity. This work summarizes the effect of the nanoparticles on the thermodynamics and kinetics of hydrate formation. And also, this work probes into the mechanism of the effect of the nanoparticles on the formation of hydrate as well as provides some suggestions for future research. It is found that it's difficult for nanoparticles to effectively promote the formation of the gas hydrate without the use of surfactants, because the adhesion characteristics of the nanoparticles make them easily agglomerate or even agglomerate in solution. In addition, at present, the research on the influence of nanoparticles on the formation and decomposition of natural gas hydrate is still very fragmented, and the micro mechanism of the influence is not clear, which requires more systematic and specific research in the future. At the same time, the development of nanoparticles that can promote the formation of natural gas hydrate should also become the focus of future research.

The use of nanoparticles and their effects on thermodynamics and kinetics during the hydrate formation process is summarized. For their application in drilling fluid and cement slurry, it is found nanoparticles must be used in conjunction with surfactants to be effective.

Crystallization Behavior of the Hydrogen Sulfide Hydrate Formed in Microcapillaries

There are no reports on the hydrogen sulfide hydrate growth process and morphology in micropores due to the toxicity of hydrogen sulfide. In this study, the experimental measurements and dissociation enthalpies were provided to assess the effect of the microcapillary silica tube size on hydrogen sulfide hydrate dissociation conditions. To simulate micropore sediments, the H₂S hydrate growth processes and morphologies at different supercooling temperatures were observed in this study. The dissociation temperature depression of the hydrate crystal in the microcapillary was less than 0.001 °C, which shows that the stability of the hydrate is less affected by the microcapillary pore used in this study. The mass transfer from the gas phase to the liquid phase is easily blocked when the hydrogen sulfide hydrate shell covers the gas-water meniscus, causing the growth of the gas hydrate to be inhibited. The hydrate crystal morphology can be divided into fibrous, needle-like crystals and dendritic crystals when ΔT _sub > 12.7; the hydrate crystal morphology can be categorized as dendritic crystals and columnar crystals when ΔT _sub = 7.9-8.9, and the hydrate crystals can form polyhedral crystals when ΔT _sub = 7.9-8.9. Additionally, a new "bridging effect" that a hollow crystal which was filled with the gas phase can connect with two separated gas phases was found at low supercooling temperature.