Ultra-sensitive p-nitrophenol sensing performances based on various Ag 2 O conjugated carbon material composites

Electrochemical Sensing Based on Metal-Organic Frameworks-Derived Carbon/Molybdenum Disulfide Composites with Superstructure and Synergistic Catalysis

Metal-organic frameworks (MOFs)-derived nanocomposite has attracted extensive attention due to its tunable nanoscale cavities and high chemical tailorability. Herein, with the aim of developing a sensitive electrochemical sensor for p-nitrophenol, a novel MOFs-derived nanocomposite was prepared by the solvothermal method using Zr-MOFs, thiourea, and sodium molybdate as raw materials. By controlling the growth mode and reaction time, the nanohybrids displayed a superstructure composed of MOFs-derived carbon (MOFs-C) and MoS2. Scanning electron microscopy images indicated that MOFs-C/MoS2 was a flower-like porous sphere. Transmission electron microscopic images showed that the MOFs-C/MoS2 had a unique arrow target-like structure. The porous structure held great promise for the fast mass transfer into the material, while the layer-by-layer distributed carbon and MoS2 provided a great structure for the synergistic catalysis. The electrochemical oxidation of (hydroxyamino)phenol to nitrosophenol, which is an important process for the electrochemical behavior of p-nitrophenol, can be selectively catalyzed by the MOFs-C/MoS2. Therefore, the electrochemical sensor based on the MOFs-C/MoS2 material exhibited excellent analytical performance in the determination of p-nitrophenol. Using the technique of square wave voltammetry, the peak current varied quantitatively with the presence of p-nitrophenol in the wide concentration range of 0.5-500 μM. Furthermore, the electrochemical sensor exhibited good practicability in real sample analysis.

Nanocomposites with ZrO2@S-Doped g-C3N4 as an Enhanced Binder-Free Sensor: Synthesis and Characterization

This study describes new electrocatalyst materials that can detect and reduce environmental pollutants. The synthesis and characterization of semiconductor nanocomposites (NCs) made from active ZrO₂@S-doped g-C₃N₄ is presented. Electrochemical impedance spectroscopy (EIS) and Mott-Schottky (M-S) measurements were used to examine electron transfer characteristics of the synthesized samples. Using X-ray diffraction (XRD) and high-resolution scanning electron microscopy (HR-SEM) techniques, inclusion of monoclinic ZrO₂ on flower-shaped S-doped-g-C₃N₄ was visualized. High-resolution X-ray photoelectron spectroscopy (XPS) revealed successful doping of ZrO₂ into the lattice of S-doped g-C₃N₄. The electron transport mechanism between the electrolyte and the fluorine tin-oxide electrode (FTOE) was enhanced by the synergistic interaction between ZrO₂ and S-doped g-C₃N₄ as co-modifiers. Development of a platform with improved conductivity based on an FTOE modified with ZrO₂@S-doped g-C₃N₄ NCs resulted in an ideal platform for the detection of 4-nitrophenol (4-NP) in water. The electrocatalytic activity of the modified electrode was evaluated through determination of 4-NP by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) under optimum conditions (pH 5). ZrO₂@S-doped g-C₃N₄ (20%)/FTOE exhibited good electrocatalytic activity with a linear range from 10 to 100 μM and a low limit of detection (LOD) of 6.65 μM. Typical p-type semiconductor ZrO₂@S-doped g-C₃N₄ NCs significantly impact the superior detection of 4-NP due to its size, shape, optical properties, specific surface area and effective separation of electron-hole pairs. We conclude that the superior electrochemical sensor behavior of the ZrO₂@S-doped g-C₃N₄ (20%)/FTOE surfaces results from the synergistic interaction between S-doped g-C₃N₄ and ZrO₂ surfaces that produce an active NC interface.

Mango Seed-Derived Hybrid Composites and Sodium Alginate Beads for the Efficient Uptake of 2,4,6-Trichlorophenol from Simulated Wastewater

In this study, mango seed shell (MS)-based hybrid composite and composite beads (FeCl3-NaBH4/MS and Na-Alginate/MS) were designed. Batch and column experimental analyses were performed for the uptake of 2,4,6-trichlorophenol (2,4,6-TCP) from wastewater. The physicochemical characteristics of both composites were also examined. From the batch adsorption experiments, the best adsorption capacities of 28.77 mg/g and 27.42 mg/g were observed in basic media (pH 9–10) at 308 K for FeCl3-NaBH4/MS and 333 K for Na-Alginate/MS with 25 mg/L of 2,4,6-TCP concentration for 120 min. The rate of reaction was satisfactorily followed by the pseudo-second-order kinetics. Equilibrium models revealed that the mechanism of reaction followed the Langmuir isotherm. The thermodynamic study also indicated that the nature of the reaction was exothermic and spontaneous with both adsorbents. Desorption experiments were also carried out to investigate the reliability and reusability of the composites. Furthermore, the efficiency of the adsorbents was checked in the presence of different electrolytes and heavy metals. From the batch experimental study, the FeCl3-NaBH4/MS composite proved to be the best adsorbent for the removal of the 2,4,6-TCP pollutant, hence it is further selected for fixed-bed column experimentation. The column study data were analyzed using the BDST and Thomas models and the as-selected FeCl3-NaBH4/MS hybrid composites showed satisfactory results for the fixed-bed adsorption of the 2,4,6-TPC contaminants.

A facile synthesis of nanostructured CoFe2O4 for the electrochemical sensing of bisphenol A

This work reports a novel, highly sensitive and cost-effective electrochemical sensor for the detection of bisphenol A in environmental water samples. Attractive non-noble transition metal oxide CoFe₂O₄ nanoparticles were successfully synthesized using a sol–gel combustion method and further characterized by X-ray diffraction, scanning electron microscopy and X-ray photoelectron spectroscopy. Under optimal conditions, the CoFe₂O₄ nanoparticle modified glassy carbon electrode exhibits high electrochemical activity and good catalytic performance for the detection of bisphenol A. The linear calibration curves are obtained within a wide concentration range from 0.05 μmol L⁻¹ to 10 μmol L⁻¹, and the limit of detection is 3.6 nmol L⁻¹ for bisphenol A. Moreover, this sensor also demonstrates excellent reproducibility, stability, and good anti-interference ability. The sensor was successfully applied to determine bisphenol A in practical samples, and the satisfactory recovery rate was between 95.5% and 102.0%. Based on the great electrochemical properties and practical application results, this electrochemical sensor has broad application prospects in the sensing of bisphenol A.

A new electrochemical sensor for bisphenol A is reported. CoFe₂O₄ nanoparticles were synthesized by a sol–gel combustion method. A nanoparticle-modified glassy carbon electrode exhibited outstanding electrochemical performance for the detection of bisphenol A.

A new quinoline based luminescent Zr(iv) metal-organic framework for the ultrasensitive recognition of 4-nitrophenol and Fe(iii) ions

A Zr(iv) based luminescent metal-organic framework (MOF; 1) was synthesized by a solvothermal method using a mixture of ZrCl4, quinoline-2,6-dicarboxylic acid (H2QDA) ligand and trifluoroacetic acid (modulator) having a 1 : 1 : 10 molar ratio in N,N-dimethylformamide (DMF). For activation, the methanol-exchanged sample was heated under high vacuum at 120 °C for 1 day. Different techniques like X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy and energy dispersive X-ray (EDX) analysis were applied to fully characterize 1. The activated form of 1 (called 1') has the formula [Zr6O6(OH)2(CF3COO)2(C11H5NO4)4(H2O)4]. It exhibited quick response and great selectivity for the fluorimetric sensing of 4-nitrophenol (4-NP) in acetonitrile and Fe3+ ions in water. The probe maintained its high selectivity for 4-NP and Fe3+ ions even in the presence of potentially intrusive nitroaromatics and metal ions, respectively. The detection limits for 4-NP and Fe3+ were found to be 1.40 ppt and 0.71 ppb, respectively. These values are the lowest among the existing MOF probes for Fe3+ and 4-NP. The electron and energy transfer processes along with the electrostatic interactions of 4-NP with the MOF can be the possible reasons for the selectivity for 4-NP. The fluorescence resonance energy transfer (FRET) process can be the major reason behind the quenching mechanism for Fe3+ ions. The recyclability test indicates that 1' is a promising probe for the long-term detection of 4-NP and Fe3+ ions.