Photocatalytic degradation of methylene blue dye by nonconventional synthesized SnO2 nanoparticles

Phytosynthesis and characterization of tin-oxide nanoparticles (SnO2-NPs) from Croton macrostachyus leaf extract and its application under visible light photocatalytic activities

Nanotechnology is rapidly becoming more and more important in today's technological world as the need for industry increases with human well-being. In this study, we synthesized SnO2 nanoparticles (NPs) using an environmentally friendly method or green method from Croton macrostachyus leaf extract, leading to the transformation of UV absorbance to visible absorbance by reducing the band gap energy. The products underwent UV, FTIR, XRD, SEM, EDX, XPS, BET, and DLS for characterization. Characterization via UV-Vis spectroscopy confirmed the shift in absorbance towards the visible spectrum, indicating the potential for enhanced photocatalytic activity under visible light irradiation. The energy band gap for as-synthesized nanoparticles was 3.03 eV, 2.71 eV, 2.61 eV, and 2.41 eV for the 1:1, 1:2, 1:3, and 1:4 sample ratios, respectively. The average crystal size of 32.18 nm and very fine flakes with tiny agglomerate structures of nanoparticles was obtained. The photocatalytic activity of the green-synthesized SnO2 nanoparticles was explored under visible light irradiation for the degradation of rhodamine B (RhB) and methylene blue (MB), which were widespread fabric pollutants. It was finally confirmed that the prepared NPs were actively used for photocatalytic degradation. Our results suggest the promising application of these green-synthesized SnO2 NPs as efficient photocatalysts for environmental remediation with low energy consumption compared to other light-driven processes. The radical scavenging experiment proved that hydroxyl radicals (_OH) are the predominant species in the reaction kinetics of both pollutant dyes under visible light degradation.

Numerical simulation study of high-efficiency silicon-based cell destined for photoelectrochemical wastewater treatment

Photoelectrochemical setups based on semiconductor photoelectrodes are known for their effectiveness in wastewater treatment, powered by solar energy, which is a renewable and sustainable source. These systems require semiconductor photocatalysts with excellent light-absorbing properties and high stability in aqueous environments. In this regard, silicon is highly investigated in solar cells thanks to its narrow bandgap, making it a potential solar harvester. Metal oxides stand as promising semiconductors, which are non-toxic and thermodynamically stable. In this work, two high-efficiency silicon-based cells have been investigated via Solar Cell Capacitance Simulator (SCAPS-1D) software. Thickness and doping concentration, of each layer, have been scrutinized for multiple buffer propositions to investigate the physical feasibility and optimal values allowing maximal light harvesting. It was found that the overall cell performance is influenced by extremely high doping concentrations for some layers. The effect of temperature was investigated as well at temperatures ranging from 300 to 350 K; it was discovered that the cell demonstrates great performance at the ambient temperature. A maximum solar efficiency of about 25.44% was calculated. Our findings build the path towards fabricating highly efficient Si-based solar cells for photoelectrochemical wastewater treatment.

Carboxymethylcellulose/Agar-Based Multifunctional Films Incorporated with Zn-Doped SnO2 Nanoparticles for Active Food Packaging Application

SnO2 and Zn-SnO2 nanoparticles were prepared by chemical precipitation, and the rutile phase of SnO2 was confirmed through X-ray diffraction studies. X-ray photoelectron spectroscopy (XPS) confirmed the doping of SnO2 with Zn and elucidated the surface chemistry before and after doping. The average sizes of SnO2 and Zn-SnO2 nanoparticles determined using TEM were 3.96 ± 0.85 and 3.72 ± 0.9 nm, respectively. UV-visible and photoluminescence spectrophotometry were used to evaluate the optical properties of SnO2 and Zn-SnO2 nanoparticles, and their energy gaps (Eg) were 3.8 and 3.9 eV, respectively. The antibacterial activity of these nanoparticles against Salmonella enterica and Staphylococcus aureus was evaluated under dark and light conditions. Antibacterial activity was higher in light, showing the highest activity (99.5%) against S. enterica. Carboxymethylcellulose (CMC)/agar-based functional composite films were prepared by adding different amounts of SnO2 and Zn-SnO2 nanoparticles (1 and 3 wt % of polymers). The composite film showed significantly increased UV barrier properties while maintaining the mechanical properties, water vapor barrier, and transparency compared to the neat CMC/agar film. These composite films showed significant antibacterial activity; however, the Zn-SnO2-added film showed stronger antibacterial activity (99.2%) than the SnO2-added film (15%).

SnO2 and CuO anchored on zeolite as an efficient heterojunction photocatalyst for sunlight-assisted degradation of cefixime

The fabrication of heterojunction nanocomposites has been proven as a highly efficient strategy to achieve promising photocatalysts. In this study, tin oxide (SnO₂) and copper oxide (CuO) nanoparticles (NPs) were synthesized in situ using Rosmarinus officinalis and simultaneously anchored on zeolite for the fabrication of zeolite/SnO₂/CuO as a novel heterojunction photocatalyst. The performance of zeolite/SnO₂/CuO was assessed against photodegradation of cefixime as a model pharmaceutical contaminant. A good catalytic potential and synergistic effect was obtained for zeolite/SnO₂/CuO compared to pure SnO₂ and CuO NPs. Under optimum conditions, 89.65% of cefixime was degraded after 2.5 h under natural sunlight. Based on radical quenching experiments, the importance of involved oxidizing species in the photodegradation of cefixime using zeolite/SnO₂/CuO was in order of h⁺ > ^•OH > [Formula: see text]. Among studied anions, the highest inhibitory effect was observed for nitrate ion. Also, the main intermediates of the photodegradation process of cefixime in zeolite/SnO₂/CuO system were determined by HPLC-MS and the possible pathways were suggested. More than 83% cefixime was removed after three catalyst reuse cycles, indicating a cost-effectiveness potential in the reusability of zeolite/SnO₂/CuO. Also, the toxicity and plant growth tests revealed the feasibility of discharging the treated cefixime solutions to irrigate agricultural crops. Overall, the obtained results provide a promising technique with a synergistic feature for the efficient removal of organic pollutants.

Green Synthesis of NiO-SnO2 Nanocomposite and Effect of Calcination Temperature on Its Physicochemical Properties: Impact on the Photocatalytic Degradation of Methyl Orange

Background: Nickel stannate nanocomposites could be useful for removing organic and toxic water pollutants, such as methyl orange (MO). Aim: The synthesis of a nickel oxide-tin oxide nanocomposite (NiO-SnO₂ NC) via a facile and economically viable approach using a leaf extract from Ficus elastica for the photocatalytic degradation of MO. Methods: The phase composition, crystallinity, and purity were examined by X-ray diffraction (XRD). The particles' morphology was studied using scanning electron microscopy (SEM). The elemental analysis and colored mapping were carried out via energy dispersive X-ray (EDX). The functional groups were identified by Fourier transform infrared spectroscopy (FTIR). UV-visible diffuse reflectance spectroscopy (UV-vis DRS) was used to study the optical properties such as the absorption edges and energy band gap, an important feature of semiconductors to determine photocatalytic applications. The photocatalytic activity of the NiO-SnO₂ NC was evaluated by monitoring the degradation of MO in aqueous solution under irradiation with full light spectrum. The effects of calcination temperature, pH, initial MO concentration, and catalyst dose were all assessed to understand and optimize the physicochemical and photocatalytic properties of NiO-SnO₂ NC. Results: NiO-SnO₂ NC was successfully synthesized via a biological route using F. elastica leaf extract. XRD showed rhombohedral NiO and tetragonal SnO₂ nanostructures and the amorphous nature of NiO-SnO₂ NC. Its degree of crystallinity, crystallite size, and stability increased with increased calcination temperature. SEM depicted significant morphological changes with elevating calcination temperatures, which are attributed to the phase conversion from amorphous to crystalline. The elemental analysis and colored mapping show the formation of highly pure NiO-SnO₂ NC. FTIR revealed a decrease in OH, and the ratio of oxygen vacancies at the surface of the NC can be explained by a loss of its hydrophilicity at increased temperatures. All the NC samples displayed significant absorption in the visible region, and a blue shift is seen and the energy band gap decreases when increasing the calcination temperatures due to the dehydration and formation of compacted large particles. NiO-SnO₂ NC degrades MO, and the photocatalytic performance decreased with increasing calcination temperature due to an increase in the crystallite size of the NC. The optimal conditions for the efficient NC-mediated photocatalysis of MO are 100 °C, 20 mg catalyst, 50 ppm MO, and pH 6. Conclusions: The auspicious performance of the NiO-SnO₂ NCs may open a new avenue for the development of semiconducting p-n heterojunction catalysts as promising structures for removing undesirable organic pollutants from the environment.

SnO2 Nanoparticles: Green Synthesis, Characterization, and Water Treatment

The green synthesis approach was utilized to synthesize tin dioxide (SnO2) nanoparticles (NPs) using Ocimum Basilicum leaves extract with different concentrations (10, 15, 20 ml) and different reaction temperatures (30, 60, 90 °C). The green synthesis method is considered economical, environmentally friendly, and non-toxic. X-ray diffraction patterns of the synthesized SnO2 NPs have displayed a tetragonal crystalline structure. The crystallite size of SnO2 NPs increased from 15.12 to 17.9 nm with increasing reaction temperature while decreasing from 20.68 to 17.9 nm with increasing extract concentrations. The morphology of the synthesized SnO2 NPs was investigated using high-energy transmission electron microscopy (HR-TEM). The optical energy gap was determined using the diffuse reflectance UV–vis spectra range (300–1200) nm of SnO2 NPs at different reaction temperatures and different extract concentrations. UV/Visible Spectrophotometer was used for studying the photodegradation of methylene blue dye (MB) dye. The photocatalytic degradation of MB revealed that SnO2 NPs at reaction temperature 90 °C degraded 69% of MB solution when exposed to UV illumination for 90 min while the degradation reaches 90% for 180 min of exposure. It was obvious that the degradation rate of MB was increased with the increase of reaction temperature, and the extract concentration.

Biogenic Photo-Catalyst TiO2 Nanoparticles for Remediation of Environment Pollutants

This article reports a benign environmentally friendly fabrication method of titanium dioxide (TDO) nanoparticles (named TDO NPs3, TDO NPs5, and TDO NPs8) using aqueous extract of durva herb waste. This synthesis process avoids use of harmful substances and persistent chemicals throughout the order and enables us to control the size of the nanomaterials. Characterization of TDO nanoparticles was analyzed by ultraviolet-visible spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The morphological nature of the TDO samples was inspected by transmission electron microscopy, which indicated that the TDO NPs3, TDO NPs5, and TDO NPs8 were spherical in shape, with average sizes of 5.14, 12.54, and 29.61 nm, respectively. The stability of TDO nanoparticles was assessed using thermogravimetric analysis and dynamic light scattering analysis. These samples could be used for degradation of polluting industrial textile dyes, such as methylene blue (MB) and rhodamine B (Rh-B). Remarkably, the TDO NPs3 sample (5.14 nm size) exhibits a noticeable degradation of the MB dye in a shorter time period (50 min) than the TDO NPs8 sample with a size of 29.61 nm (120 min). The TDO NPs3 sample was also tested for degradation of Rh-B dye, showing high degradation efficiency over a short period of time (60 min). In contrast, the TDO NPs8 sample showed degradation of the Rh-B dye in 120 min. The effect of the dye concentration and the catalyst dose to remove dye pollutants has also been investigated. The synthesized TDO NPs act as exceptional catalysts for the degradation of dyes, and they are promising materials for the degradation of industrial polluting dyes.

Current Trends in the Utilization of Photolysis and Photocatalysis Treatment Processes for the Remediation of Dye Wastewater: A Short Review

Development in the textile industry leads to an increased demand for the use of various dyes. Moreover, there is the use of some dyes in the food industry as well as medical diagnostics. Thereby, increased demand for dyes in various fields has resulted in dye-containing wastewater. Only a small portion of the generated wastewater is adequately treated. The rest is usually dumped or otherwise directly discharged into the sewage system, which ultimately enters rivers, lakes, and streams. The handling and disposal of such concentrated wastewater, especially the dye-containing wastewater, is considered to be a major environmental issue from the moment of its generation to its ultimate disposal. Conventional water treatment methods such as flotation, filtration, adsorption, etc., are non-destructive physical separation processes. They only transfer the pollutants to other phases, thereby generating concentrated deposits. The advanced oxidation process (AOP) is one of the most effective emerging methods for the treatment of wastewater containing chemical pollutants. The method involves the formation and interaction of highly reactive hydroxyl radicals under suitable activation conditions. These radicals are non-selective and efficient for the destruction and eventual mineralization of recalcitrant organic pollutants. This review aims at the pros and cons of using photocatalysis as an efficient AOP to degrade dye-containing wastewater.

Current Developments in the Effective Removal of Environmental Pollutants through Photocatalytic Degradation Using Nanomaterials

Photocatalysis plays a prominent role in the protection of the environment from recalcitrant pollutants by reducing hazardous wastes. Among the different methods of choice, photocatalysis mediated through nanomaterials is the most widely used and economical method for removing pollutants from wastewater. Recently, worldwide researchers focused their research on eco-friendly and sustainable environmental aspects. Wastewater contamination is one of the major threats coming from industrial processes, compared to other environmental issues. Much research is concerned with the advanced development of technology for treating wastewater discharged from various industries. Water treatment using photocatalysis is prominent because of its degradation capacity to convert pollutants into non-toxic biodegradable products. Photocatalysts are cheap, and are now emerging slowly in the research field. This review paper elaborates in detail on the metal oxides used as a nano photocatalysts in the various type of pollutant degradation. The progress of research into metal oxide nanoparticles, and their application as photocatalysts in organic pollutant degradation, were highlighted. As a final consideration, the challenges and future perspectives of photocatalysts were analyzed. The application of nano-based materials can be a new horizon in the use of photocatalysts in the near future for organic pollutant degradation.

Effect of Fe Doping on Photocatalytic Dye-Degradation and Antibacterial Activity of SnO2 Nanoparticles

A simple hydrothermal method is utilized to synthesize iron-doped tin oxide nanoparticles (Fe-SnO2 NPs) at various doping concentrations. The structural characterization using XRD, Raman, and FTIR measurements confirmed the incorporation of Fe ions into the SnO2 lattice without any deviation in the tetragonal crystal system of SnO2 nanoparticles. SEM and HRTEM images show the spherical-shaped nanoparticles with agglomeration. The values of interplanar spacing ( $d$ -value) calculated from the HRTEM lattice are consistent with the XRD results. Further, optical analysis revealed a red shift in the optical absorption band and a decrease in the band gap energy with an increase in Fe-dopant concentration. The decrease of PL emission peak intensity with Fe doping revealed the generation of singly charged oxygen vacancies. The H2O2-assisted photocatalytic degradation efficiency of Fe-SnO2 NPs investigated against crystal violet dye indicated an efficiency of 98% for 0.05 M Fe-SnO2 NPs within 30 minutes under visible light illumination. In addition, the effects of pH, scavengers, and reusability of the catalyst are tested. The antibacterial behavior of Fe-SnO2 NPs against Escherichia coli is examined by using the colony count method, and the inhibition rate was found to be 49, 65, 70, and 78% for pure, 0.01, 0.03, and 0.05 M Fe-SnO2 NPs, respectively.

State-of-the-art biosynthesis of tin oxide nanoparticles by chemical precipitation method towards photocatalytic application

Tin oxide (SnO₂) with versatile properties is of substantial standing for practical application, and improved features of the material are demonstrated in the current issue through the integration of nanotechnology with bio-resources leading to what is termed as biosynthesis of SnO₂ nanoparticles (NPs). This review reveals the recent advances in biosynthesis of SnO₂ NPs by chemical precipitation method focused on distinct methodologies, characterization, and reaction mechanism along with a photocatalytic application for dye degradation. According to available literature reviews, numerous bio-based precursors selectively extracted from biological substrates have effectively been applied as capping or reducing agents to achieve the metal oxide NPs. The major precursor obtained from the aqueous extract of root barks of Catunaregam spinosa is found to be 7-hydroxy-6-methoxy-2H-chromen-2-one that has been proposed as a model compound for the reduction of metal ions into nanoparticles due to having highly active functional groups, being abundant in plants (67.475 wt%), easy to extract, and eco benign. In addition, the photocatalytic activity of SnO₂ NPs for the degradation of organic dyes, pharmaceuticals, and agricultural contaminants has been discussed in the context of a promising bio-reduction mechanism of the synthesis. The final properties are supposed to depend exclusively upon a number of factors, e.g., particle size (< 50 nm), bandgap (< 3.6 eV), crystal defects, and catalysts dosage. With this contribution, it has been perceived not only to provide an overview of recent advances in the biosynthesis of SnO₂ NPs but also to indicate the main issues in need aiming to show vision towards innovative outcomes.

Green Synthesis of Nano Zinc Oxide/Nanohydroxyapatite Composites Using Date Palm Pits Extract and Eggshells: Adsorption and Photocatalytic Degradation of Methylene Blue

In this study, zinc oxide nanoparticles (ZnO) and nanohydroxyapatite (NHAP) were prepared in the presence of date palm pits extract (DPPE) and eggshells, respectively. Another four nanocomposites were prepared from ZnO and NHAP in different ratios (ZP13, ZP14, ZP15, and ZP16). DPPE and all nanomaterials were characterized using GC-MS, zeta potentials, particle size distributions, XRD, TEM, EDX, FTIR, and pH_PZC. The characterization techniques confirmed the good distribution of ZnO nanoparticles on the surface of NHAP in the prepared composites. Particles were found to be in the size range of 42.3–66.1 nm. The DPPE analysis confirmed the presence of various natural chemical compounds which act as capping agents for nanoparticles. All the prepared samples were applied in the adsorption and photocatalytic degradation of methylene blue under different conditions. ZP14 exhibited the maximum adsorption capacity (596.1 mg/g) at pH 8, with 1.8 g/L as the adsorbent dosage, after 24 h of shaking time, and the static adsorption kinetic process followed a PSO kinetic model. The photocatalytic activity of ZP14 reached 91% after 100 min of illumination at a lower MB concentration (20 mg/L), at pH 8, using 1.5 g/L as the photocatalyst dosage, at 25 °C. The photocatalytic degradation of MB obeyed the Langmuir–Hinshelwood first-order kinetic model, and the photocatalyst reusability exhibited a slight loss in activity (~4%) after five cycles of application.

Facile One-Pot Biogenic Synthesis of Cu-Co-Ni Trimetallic Nanoparticles for Enhanced Photocatalytic Dye Degradation

Biomolecules from plant extracts have gained significant interest in the synthesis of nanoparticles owing to their sustainable properties, cost efficiency, and environmental wellbeing. An eco-friendly and facile method has been developed to prepare Cu-Co-Ni trimetallic nanoparticles with simultaneous bio-reduction of Cu-Co-Ni metal precursors by aqueous extract of oregano (Origanum vulgare) leaves. Dramatic changes in physicochemical properties of trimetallic nanoparticles occur due to synergistic interactions between individual metal precursors, which in turn outclass the properties of corresponding monometallic nanoparticles in various aspects. The as biosynthesized Cu-Co-Ni trimetallic nanoparticles were initially analyzed using ultraviolet (UV)–visible spectroscopy. The morphology, structure, shape, and size of biosynthesized trimetallic nanoparticles were confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) spectroscopy. The elemental analysis was carried out by energy-dispersive X-ray (EDX) spectroscopy. Fourier transform infrared (FTIR) microscopy was carried out to explain the critical role of the biomolecules in the Origanum vulgare leaf extract as capping and stabilizing agents in the nanoparticle formation. Additionally, simultaneous thermogravimetric analysis (TGA) and differential thermogravimetry (DTG) analysis was also performed to estimate the mass evaluation and rate of the material weight changes. The photocatalytic activity of as biosynthesized trimetallic nanoparticles was investigated towards methylene blue (MB) dye degradation and was found to be an efficient photocatalyst for dye degradation. Kinetic experiments have shown that photocatalytic degradation of MB dye followed pseudo-first-order kinetics. The mechanism of the photodegradation process of biogenic Cu-Co-Ni trimetallic nanoparticles was also addressed.

Photocatalytic Degradation of Methylene Blue from Aqueous Medium onto Perlite-Based Geopolymer

In this work, geopolymer synthesized with perlite and an alkaline activator medium was evaluated as a new adsorbent and photocatalyst for degradation of methylene blue (MB) dye from an aqueous medium. The functional group, the structure, and the morphology of the raw and the synthesized materials were characterized using FT-IR, XRD, and SEM analysis. The degradation of MB in the contaminated solution was examined using the spectrophotometric technique. Several analysis methods revealed the formation of the aluminosilicate gel after the geopolymerization reaction. The kinetics data with UV and without UV irradiations were well fitted with the pseudo-second-order equation. The results indicated that the degradation efficiency of cationic dye by perlite-based geopolymer without and with UV was up to 88.94% and 97.87% in 4 hours, respectively. The degradation efficiencies of methylene blue are in the following order: perlite-based geopolymer under UV irradiations is greater than perlite-based geopolymer without UV irradiations that is larger than UV irradiations. The overall experimental results suggested that the new elaborated material with synergetic adsorption and photocatalytic activities has a great potential for the treatment of water contaminated by hazardous substances.

Tuning the CrIV/CrIII Valence States in Purple Cr-Doped SnO2 Nanopowders: The Key Role of CrIV Centers and Defects

A low content of chromium (≤5 mol %) has been incorporated into a SnO₂ cassiterite by a coprecipitation route in a basic medium, followed by an annealing step under an O₂ flow at T = 800 °C and T = 1000 °C. Accurate UV-vis and EPR spectroscopy investigations show the coexistence of isolated Cr⁴⁺ and Cr³⁺ ions as well as ferromagnetic Cr⁴⁺-Cr³⁺ and antiferromagnetic Cr³⁺-Cr³⁺ interactions. The strong purple hue is related to the isolated Cr⁴⁺ ions stabilized in a distorted octahedral site. This is thanks to the second-order Jahn-Teller (SOJT) effect with a crystal field splitting 10Dq value around 2.4 eV, whereas the 10Dq value is around 2 eV for isotropic Cr³⁺ ions, partially substituted for Sn⁴⁺ ions in cassiterite. Just after the coprecipitation process, only Cr³⁺ species are stabilized in this rutile network with a poor crystallinity. The isolated Cr⁴⁺ content remains high after annealing at 800 °C for 2 days especially for the highest Cr rate (2 and 5 mol %), leading to a darker purple color, but unfortunately the Cr³⁺ content also increases for a higher Cr concentration. A lighter purple hue can be reached after calcination at a higher temperature (T = 1000 °C) for a shorter time (4 h) but with a lower Cr content to avoid Cr clusters. This is due to stabilizing a high content of isolated Cr⁴⁺ species and limiting the Cr⁴⁺-Cr³⁺ ferromagnetic interactions, which are optimal for a 2% Cr content and also cause the color to darken. The key roles of the Cr⁴⁺ rate and the Cr⁴⁺-Cr³⁺ clusters create local defects whose concentration strongly varies with a total Cr content, which have then been demonstrated to strongly influence the optical and magnetic properties.

Facile synthesis of Fe2O3 nanoparticles from Egyptian insecticide cans for efficient photocatalytic degradation of methylene blue and crystal violet dyes

In this study, Fe₂O₃ (hematite) nanoparticles with different crystallite sizes (40-59 nm) were synthesized from Egyptian insecticide cans using the combustion method. The organic fuels were urea, glycine, L-alanine, and L-valine. Fe₂O₃ nanoparticles were characterized utilizing different devices such as BET, PL, FT-IR, XRD, HR-TEM, FE-SEM, UV-Vis, and DTG. Crystal violet (CV) and methylene blue (MB) dyes were efficiently removed from aqueous solution by photocatalytic degradation under UV irradiation in the presence of Fe₂O₃ and H₂O₂. The % degradation of 50 mL crystal violet or methylene blue dye (20 mg/L) using 0.1 g Fe₂O₃ in the presence of H₂O₂ was 100% after 30 or 40 min, respectively. Also, the degradation processes are fitted well with the first order model. Besides, the photocatalytic activity of Fe₂O₃ unaltered even after it was reused three times. Hence, the synthesized Fe₂O₃ nanoparticles can be considered a promising and efficient photocatalyst for the degradation of crystal violet and methylene blue dyes.

Facile Synthesis of SnO₂ Aerogel/Reduced Graphene Oxide Nanocomposites via in Situ Annealing for the Photocatalytic Degradation of Methyl Orange

SnO₂ aerogel/reduced graphene oxide (rGO) nanocomposites were synthesized using the sol⁻gel method. A homogeneous dispersion of graphene oxide (GO) flakes in a tin precursor solution was captured in a three-dimensional network SnO₂ aerogel matrix and successively underwent supercritical alcohol drying followed by the in situ thermal reduction of GO, resulting in SnO₂ aerogel/rGO nanocomposites. The chemical interaction between aerogel matrix and GO functional groups was confirmed by a peak shift in the Fourier transform infrared spectra and a change in the optical bandgap of the diffuse reflectance spectra. The role of rGO in 3D aerogel structure was studied in terms of photocatalytic activity with detailed mechanism of the enhancement such as electron transfer between the GO and SnO₂. In addition, the photocatalytic activity of these nanocomposites in the methyl orange degradation varied depending on the amount of rGO loading in the SnO₂ aerogel matrix; an appropriate amount of rGO was required for the highest enhancement in the photocatalytic activity of the SnO₂ aerogel. The proposed nanocomposites could be a useful solution against water pollutants.