Physiochemical characteristics of aerosol particles collected from the Jokhang Temple indoors and the implication to human exposure

Impact of altitude on the dosage of indoor particulates entering an individual's small airways

The complexity of indoor particulate exposure intensifies at higher altitudes owing to the increased lung capacity that residents develop to meet the higher oxygen demands. Altitude variations impact atmospheric pressure and alter particulate dynamics in ambient air and the human respiratory tract, complicating particulate inhalation. This study assessed the fraction of PM2.5 and PM10 entering small airways. This assessment covered an altitude range from 400 m above sea level to 3650 m, and an in vitro respiratory tract model was used. The experimental results confirmed that with increasing altitude, the penetration fractions of PM2.5 and PM10 significantly increased from 0.133 ± 0.031 and 0.141 ± 0.045 to 0.404 ± 0.159 and 0.353 ± 0.132, respectively. Additionally, the computational fluid dynamics simulation results revealed that among particles with sizes of 0.1 to 10 µm, the 7.5-μm particles exhibited the most substantial reduction in deposition in the upper airway, displaying a decrease of 6.27%. Our findings underscore the health risks faced by low-altitude residents during acclimatization to higher altitudes, as they experience heightened exposure to particulate matter sources.

The impact of high background particle concentration on the spatiotemporal distribution of Serratia marcescens bioaerosol

Airborne transmission is a well-established mode of dissemination for infectious diseases, particularly in closed environments. However, previous research has often overlooked the potential impact of background particle concentration on bioaerosol characteristics. We compared the spatial and temporal distributions of bioaerosols under two levels of background particle concentration: heavily polluted (150-250 μg/m3) and excellent (0-35 μg/m3) in a typical ward. Serratia marcescens bioaerosol was adopted as a bioaerosol tracer, and the bioaerosol concentrations were quantified using six-stage Andersen cascade impactors. The results showed a significant reduction (over at least 62.9%) in bioaerosol concentration under heavily polluted levels compared to excellent levels at all sampling points. The temporal analysis also revealed that the decay rate of bioaerosols was higher (at least 0.654 min-1) under heavily polluted levels compared to excellent levels. These findings suggest that background particles can facilitate bioaerosol removal, contradicting the assumption made in previous research that background particle has no effect on bioaerosol characteristics. Furthermore, we observed differences in the size distribution of bioaerosols between the two levels of background particle concentration. The average bioaerosols size under heavily polluted levels was found to be higher than that under excellent levels, and the average particle size under heavily polluted levels gradually increased with time. In conclusion, these results highlight the importance of considering background particle concentration in future research on bioaerosol characteristics.

Benzo[a]pyrene—Environmental Occurrence, Human Exposure, and Mechanisms of Toxicity

Benzo[a]pyrene (B[a]P) is the main representative of polycyclic aromatic hydrocarbons (PAHs), and has been repeatedly found in the air, surface water, soil, and sediments. It is present in cigarette smoke as well as in food products, especially when smoked and grilled. Human exposure to B[a]P is therefore common. Research shows growing evidence concerning toxic effects induced by this substance. This xenobiotic is metabolized by cytochrome P450 (CYP P450) to carcinogenic metabolite: 7β,8α-dihydroxy-9α,10α-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (BPDE), which creates DNA adducts, causing mutations and malignant transformations. Moreover, B[a]P is epigenotoxic, neurotoxic, and teratogenic, and exhibits pro-oxidative potential and causes impairment of animals’ fertility. CYP P450 is strongly involved in B[a]P metabolism, and it is simultaneously expressed as a result of the association of B[a]P with aromatic hydrocarbon receptor (AhR), playing an essential role in the cancerogenic potential of various xenobiotics. In turn, polymorphism of CYP P450 genes determines the sensitivity of the organism to B[a]P. It was also observed that B[a]P facilitates the multiplication of viruses, which may be an additional problem with the widespread COVID-19 pandemic. Based on publications mainly from 2017 to 2022, this paper presents the occurrence of B[a]P in various environmental compartments and human surroundings, shows the exposure of humans to this substance, and describes the mechanisms of its toxicity.

Exposure assessment of PM2.5 in temple premises and crematoriums in Kanpur, India

Regular use of incense and earthen lamps in temples leads to the release of particulate matter (PM), airborne flecks, and gaseous pollutants. Similarly, the cremation of dead bodies using timber and other accessories such as incense, organic chemicals containing carbon, and clothes generates air pollutants. It is currently unclear how much emissions and exposure these activities may lead. This work attempts to fill this gap in our understanding by assessing the associated emissions of PM_2.5 and the corresponding exposure. Ten temples and two cremation grounds were considered for the sampling of PM_2.5. The average PM_2.5 concentration at the ten temples and the two crematoriums was found to be 658.30 ± 112.63 µg/m³ and 1043.50 ± 191.63 µg/m³, respectively. The range of real-time PM_2.5 data obtained from the nearest twelve stations located in the vicinity was 113-191 µg/m³. The exposure assessment in terms of deposition dose was carried out using the ICRP model. The maximum and minimum total respiratory deposition dose rate for PM_2.5 for temples was 175.75 µg/min and 101.15 µg/min, respectively. For crematoriums, the maximum and minimum value of same was 252.3 µg/min and 194.31 µg/min, respectively, for an exposure period of 10 min.

Chemical characterization and sources of submicron aerosols in Lhasa on the Qinghai-Tibet Plateau: Insights from high-resolution mass spectrometry

In recent years, a great number of studies has been carried out in urban cities regarding urban particulate matter (PM) pollution in China, especially in eastern China. Lhasa, the capital of the Tibet Autonomous Region in western China, is the highest (3650 m a.s.l.) city in China and has notably different lifestyles and PM sources comparing with those in eastern China. However, there is currently a lack of studies on PM pollution in this city. In this study, an Aerodyne high-resolution time-of-flight aerosol mass spectrometer was deployed along with other co-located instruments to explore the chemical characterization of ambient submicron PM (PM₁) in Lhasa from 31 August 2019 to 26 September 2019. The mean ambient PM₁ mass loading through this study was 4.72 μg m^-3. Organic aerosols (OAs) played a dominant role with an average contribution of 82.6% to PM₁, followed by 5.4% nitrate, 4.7% ammonium, 3.4% sulfate, 3.1% BC, and 0.7% chloride. The relatively lower contribution from secondary inorganic aerosols (nitrate and sulfate) in this study was distinctly different from that in eastern China, indicating lower fossil fuel usage in this city. Via positive matrix factorization (PMF), organic aerosols were decomposed into four components containing a traffic-related hydrocarbon-like OA (HOA), a cooking-related OA (COA), a biomass burning-related OA (BBOA), as well as an oxygenated OA (OOA). The OOA and COA had higher contributions (34% and 35%, respectively) to total OAs, while the rest accounted for 17% for HOA and 14% for BBOA. However, an increased mass fraction of BBOA (up to 36%) was found during the Sho Dun Festival, suggesting the importance of biomass burning emissions during the religious activities in this city. Frequent new particle formation events were observed during this study and the contribution of chemical species for the particle growth was also explored.

Nationwide health risk assessment of juvenile exposure to polycyclic aromatic hydrocarbons (PAHs) in the water body of Chinese lakes

The high emissions of polycyclic aromatic hydrocarbons (PAHs) pose a serious threat to the lake ecosystem and human health, and the human health risk assessment of PAH exposure is expected as an urgent project in China. This paper focused on 44 Chinese lakes in 6 lake zones to investigate the occurrence, composition and source of 19 PAHs in water body and estimate the human health risk under PAH exposure. The "List of PAH Priority Lakes" in China was generated based on the combination of incremental lifetime cancer risk (ILCR) model and Monte Carlo simulation. Our results showed that the Σ₁₇ PAHs ranged from 3.75 ng·L^-1 to 368.68 ng·L^-1 with a median of 55.88 ng·L^-1. Low-ring PAHs were the predominant compounds. PAH profiles varied significantly at lake zone level. Diagnostic ratios showed that PAHs might derive from petroleum and coal or biomass combustion. Benzo[a]pyrene-equivalent toxic concentrations (BaPeq) of the Σ₁₇ PAHs ranged from 0.07 ng·L^-1 to 2.26 ng·L^-1 (0.62 ± 0.52 ng·L^-1, mean ± standard deviation) with a median of 0.47 ng·L^-1. Benzo[a]anthracene (BaA), benzo[a]pyrene (BaP) and benzo[e]pyrene (BeP) were the main toxic isomers. Juvenile exposure to PAHs via oral ingestion (drinking) and dermal contact (showering) had negligible and potential health risks, respectively. Juveniles were the sensitive population for PAH exposure. 15 lakes were screened into the "List of PAH Priority Lakes" in three priority levels: first priority (Level A), moderate priority (Level B) and general priority (Level C). Lake Taihu, Lake Chaohu and Lake Hongze were the extreme priority lakes. Optimizing the economic structures and reducing the combustion emissions in these areas should be implemented to reduce the population under potential health risk of PAHs.

Characteristics of size distributions and sources of water-soluble ions in Lhasa during monsoon and non-monsoon seasons

To understand the physical and chemical characteristics, particle size distribution and sources of size-separated aerosols in Lhasa, which is located on the Tibetan Plateau (TP), six sizes of aerosol samples were collected in Lhasa in 2014. Ca²⁺, NH₄⁺, NO₃^-, SO₄^2- and Cl^- were the dominant ions. The ratio of cation equivalents (CE) to anion equivalents (AE) for each particle size segment indicated that the atmospheric aerosols in Lhasa were alkaline. SO₄^2- and NO₃^- could be neutralized by Ca²⁺, but could not be neutralized by NH₄⁺, according to the [NH₄⁺]/[NO₃^- + SO₄^2-] and [Ca²⁺]/[NO₃^- + SO₄^2-] ratios. Mobile sources were dominant in PM_0.95-1.5, PM_1.5-3 and PM_3-7.2, while stationary sources were dominant in the other three size fractions according to the [NO₃^-]/[SO₄^2-] ratios. The particle size distribution of all water-soluble ions during monsoon and non-monsoon periods was characterized by a bimodal distribution due to the different sources and formation mechanisms, and it was revealed that different ions had different sources in different seasons and different particle size segments by combining particle size distribution with correlation analysis. Source analysis of aerosols in Lhasa was performed using the Principal component analysis (PCA) for the first time, which revealed that combustion sources, motor vehicle exhaust, photochemical reaction sources and various types of dust were the main sources of Lhasa aerosols. Furthermore, Lhasa's air quality was also affected by long-distance transmission, expressed as pollutants from South Asia and West Asia, which were transmitted to Lhasa according to backward trajectory analysis.

Levels and sources of organic compounds in fine ambient aerosols over National Capital Region of India

The study presents the spatial and temporal variation of fine ambient aerosols (PM_2.5) over National Capital Region (NCR), India, during January to June 2016. The investigation includes three sampling sites, one in Delhi and two in the adjoining states of Delhi (Uttar Pradesh and Haryana), across NCR, India. The average PM_2.5 concentration was highest for Delhi (128.5 ± 51.5 μg m^-3) and lowest for Mahendragarh, Haryana (74.5 ± 28.7 μg m^-3), during the study period. Seasonal variation was similar for all the sites with highest concentration during winter and lowest in summer. PM_2.5 samples were analysed for organic compounds using gas chromatograph (GC). The concentration of three organic compound classes, n-alkanes (C11-C35), polycyclic aromatic hydrocarbons (PAHs), and phthalates, present in PM_2.5 samples has been reported. Diagnostic ratios for n-alkanes demonstrated that biogenic emissions were dominant over Mahendragarh while major contributions were observed from petrogenic emissions over Delhi and Modinagar, Uttar Pradesh. Molecular diagnostic ratios were calculated to distinguish between different sources of PAHs, which revealed that the fossil fuel combustion (diesel and gasoline emissions), traffic emissions, and biomass burning are the major source contributors. Health risk associated with human exposure of phthalates and PAHs was also assessed as daily intake (DI, ng kg^-1 day^-1) and lung cancer risk, respectively. Backward trajectory analysis explained the local, regional, and long-range transport routes of PM_2.5 for all sites. Principal component analysis (PCA) results summarized that the vehicular emissions, biomass burning, and plastic burning were the major sources of the PAHs and phthalates over the sampling sites.