Applicability of BaTiO3/graphene oxide (GO) composite for enhanced photodegradation of methylene blue (MB) in synthetic wastewater under UV-vis irradiation

Synthesis and characterization of X (X = Ni or Fe) modified BaTiO3 for effective degradation of Reactive Red 120 dye under UV-A light and its biological activity

For the sustainable advancement of industrial expansion that is environmentally conscious, harmful dyes must be removed from wastewater. Untreated effluents containing colors have the potential to harm the ecosystem and pose major health risks to people, animals, and aquatic life. Here, we have fabricated Ni or Fe modified with BaTiO3 materials and effectively utilized them for Reactive Red 120 (RR 120) dye degradation under UV-A light. The synthesized materials were characterized, and their structural, and photo-physical properties were reported. Phase segregation was not present in the XRD pattern, as evidenced by the absence of secondary phase peaks linked to iron, nickel, or oxides. Low metal ion concentrations may be the cause of this, and the presence of those elements was confirmed by XPS measurements. The Raman spectra of the BaTiO3/Ni and BaTiO3/Fe samples show a widened peak at 500 cm-1, which suggests that Ni or Fe are efficiently loaded onto the BaTiO3. RR 120 dye photodegradation under UV light conditions was effectively catalyzed by BaTiO3/Fe, as evidenced by its superior performance in the UV irradiation technique over both BaTiO3 and BaTiO3/Ni. Compared to bare BaTiO3, both metal-modified materials efficiently degraded the RR 120 dye. Acidic pH facilitated the degradation process, which makes sense given that the heterogeneous photo-Fenton reaction was the mechanism of degradation along with BaTiO3 sensitization. High-acidity sewage can be dangerous and carcinogenic, and conventional biological treatment methods are not appropriate for managing it. In the current investigation, it may be used to treat color effluents with extremely low pH levels. Additionally, the ability of the produced nanocomposites to inhibit the growth of twenty pathogens was examined, along with two fungi, fifteen Gram-negative Bacilli (GNB), one Gram-positive Bacilli (GPB), and two Gram-positive Cocci (GBC).

Facile construction of efficient WO3/V2O5 coupled g-C3N4 ternary composite photocatalyst for environmental emergent aqueous pollutant degradation: Stability, degradation reaction pathway and effect of pH evaluation

Currently, one of the primary challenges that human society must overcome is the task of decreasing the amount of energy used and the adverse effects that it has on the environment. The daily increase in liquid waste (comprising organic pollutants) is a direct result of the creation and expansion of new companies, causing significant environmental disruption. Water contamination is attributed to several industries such as textile, chemical, poultry, dairy, and pharmaceutical. In this study, we present the successful degradation of methylene blue dye using g-C3N4 (GCN) mixed with WO3 and V2O5 composites (GCN/WO3/V2O5 ternary composite) as a photocatalyst, prepared by a simple mechanochemistry method. The GCN/WO3/V2O5 ternary composite revealed a notable enhancement in photocatalytic performance, achieving around 97% degradation of aqueous methylene blue (MB). This performance surpasses that of the individual photocatalysts, namely pure GCN, GCN/WO3, and GCN/V2O5 composites. Furthermore, the GCN/WO3/V2O5 ternary composite exhibited exceptional stability even after undergoing five consecutive cycles. The exceptional photocatalytic activity of the GCN/WO3/V2O5 ternary composite can be ascribed to the synergistic effect of metal-free GCN and metal oxides, resulting in the alteration of the band gap and suppression of charge recombination in the ternary photocatalyst. This study offers a better platform for understanding the characteristics of materials and their photocatalytic performance under visible light conditions.

Improving the Performance of Pd for Formic Acid Dehydrogenation by Introducing Barium Titanate

Formic acid, a safe and widely available organic compound, produces hydrogen under mild conditions, with the existence of Pd-based catalysts. Efficiently generating hydrogen via formic acid decomposition (FAD) is restricted by the cleavage of the C-H bond in adsorbed HCOO* and strong adsorption of hydrogen on the Pd surface. Herein, tetragonal-phase barium titanate (TBT) was in situ grown on reduced graphene oxide (rGO) to support Pd (Pd/TBT/rGO) for FAD. The internal electric field exists around TBT owing to its spontaneous polarization capacity. The physical characterizations illustrate that the introduction of barium titanate affects the catalytic performance of the catalyst by decreasing the particle size of Pd nanoparticles (NPs) and forming electron-rich Pd. The as-synthesized Pd/TBT/rGO exhibited excellent catalytic activity and hydrogen selectivity for FAD with a high initial turnover frequency up to 3019.72 h-1 at 333 K. The reason for this enhancement is not only the small-size Pd NPs but also the internal electric field from TBT, which promotes the desorption of adsorbed hydrogen on the Pd surface. Additionally, the electron-rich Pd is favorable to the cleavage of the C-H bond in HCOO*. This work will improve the understanding of the characterization of barium titanate and provide a new design strategy for the FAD catalyst.

Multifunctional photocatalyst of graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals derived from lichen for efficient photodegradation of tetracycline and methyl blue

We propose a feasible and economical method of constructing biomass-based multifunctional photocatalysts with excellent adsorption performance and high photodegradation abilities toward tetracycline (TC) and methyl blue (MB) under visible light. A series of novel hybrids of porous graphitic carbon embedded with Fe2O3/Fe3O4 nanocrystals (denoted as Fe2O3/Fe3O4@C) were derived from lichen doped with different dosages of Fe3+ by calcination at 700°C under a N2 atmosphere. The Fe2O3/Fe3O4@C hybrids exhibited nanoflake-like shapes, mesoporous structures, and efficient visible light harvesting, thus indicating enhanced adsorption ability and photoactivity toward pollutants. The formed Fe2O3/Fe3O4 heterojunction improved the separation efficiency and inhibited the recombination of photogenerated carriers, whereas the carbon network improved the transfer of photogenerated electrons. Under optimised conditions, the Fe2O3/Fe3O4@C-1 hybrid demonstrated enhanced photodegradation efficiencies of 96.4% for TC and 100% for MB under visible light. In addition, electron spin resonance and trapping measurements were performed to identify active species and determine the photocatalytic mechanism toward pollutants. •O2- and •OH were the active species involved, playing critical roles in the TC and MB photodegradation processes. In addition, a bacterium test revealed that the products of TC degradation by Fe2O3/Fe3O4@C-1 showed low biological toxicity. This work provides a promising preparation strategy or biomass-based photocatalysts for application in environmental pollutant treatment.

Oxygen vacancy healing boosts the piezoelectricity of bone scaffolds

Although barium titanate (BaTiO3) presented tremendous potential in achieving self-powered stimulation to accelerate bone repair, pervasive oxygen vacancies restricted the full play of its piezoelectric performance. Herein, BaTiO3-GO nanoparticles were synthesized by the in situ growth of BaTiO3 on graphene oxide (GO), and subsequently introduced into poly-L-lactic acid (PLLA) powders to prepare PLLA/BaTiO3-GO scaffolds by laser additive manufacturing. During the synthesis process, CO and C-OH in GO would respectively undergo cleavage and dehydrogenation at high temperature to form negatively charged oxygen groups, which were expected to occupy positively charged oxygen vacancies in BaTiO3 and thereby inhibit the formation of oxygen vacancies. Moreover, GO could be partially reduced to reduced graphene oxide, which could act as a conductive phase to facilitate polarization charge transfer, thus further improving the piezoelectric performance. The results showed that the oxygen peak at the specific electron binding energy in O 1s declined from 54.4% to 14.6% and the Ti3+ peak that was positively correlated with oxygen vacancies apparently weakened for BaTiO3-GO, illustrating that the introduced GO significantly decreased the oxygen vacancy. As a consequence, the piezoelectric current of PLLA/BaTiO3-GO increased from 80 to 147.3 nA compared with that of PLLA/BaTiO3. The enhanced piezoelectric current effectively accelerated cell differentiation by upregulating alkaline phosphatase expression, calcium salt deposition and calcium influx. This work provides a novel insight for the design of self-powered stimulation scaffolds for bone regeneration.

Facile synthesis of a GO-g-C3N4/BaTiO3 ternary nanocomposites for visible-light-driven photocatalytic degradation of rhodamine B

Photogenerated charge carriers can undergo rapid recombination in conventional photocatalyst systems, reducing their photocatalytic efficiency. To address this bottleneck, a g-C3N4/BaTiO3 (CNB) heterojunction composite was decorated with different mass ratios of graphene oxide (GO) to form a novel visible-light responsive ternary GO-g-C3N4/BaTiO3 (GOCNB) nanocomposite using a facile fabrication method. The GOCNB photocatalyst exhibited significantly higher light absorption and greater charge transfer than CNB, g-C3N4, or BaTiO3. The photodegradation performance of GOCNB was optimized with a 2% mass loading of GO, and it achieved a degradation rate constant of 14.9 × 10-3 min-1 for rhodamine B with an efficiency of 94% within 180 min. The rate constant was 8-fold and 6-fold higher than that of bare BaTiO3 and CNB, respectively. The stronger photocatalytic activity was attributed to the synergistic effect of GO, g-C3N4, and BaTiO3, with g-C3N4 and BaTiO3 promoting charge transfer within a wider visible light range and GO promoting electron mobility and the photocatalyst's adsorption capacity. In particular, the proposed system maintained the spatial separation of photogenerated electron-hole pairs, which is vital for high photocatalytic activity. This study provides new insights into semiconductor-based photocatalytic systems and suggests a route for more environmentally sustainable technologies.

Sustainable approach of La doped CuFe2O4 nanomaterial for electrochemical lead and paracetamol sensing action with multiple applications

This present research aimed to investigate the novel applications of synthesized La doped CuFe2O4 nanomaterial (LCF NMs) using renewable bio-fuel (Aegle Marmelos extract) by combustion process. The sensor applications were accomplished by modified electrode using LCF NMs with graphite powder and examined its excellent sensing action towards heavy metal (Lead content) and drug chemical (Paracetamol) substances. The thermodynamics of redox potential and super-capacitor behavior of LCF NMs were investigated through Cyclic Voltametric (CV) and Electrochemical Impedance Spectral (EIS) methods under specific conditions at scan rate of 1 to 5 mV/s. The heterogeneous photo-catalytic process of prepared NMs on Fast orange Red (FOR) dye-decolouration was investigated and noted its excellent degradation (91.7%) at 90 min using 20 ppm of dye solution and 40 mg of synthesized samples under Sun-light irradiation. Further, the antibacterial activity of synthesized NMs is investigated against various strains of gram positive (Bacillus subtillis) and gram negative bacteria (Pseudomonas aeruginosa), which confirms that the LCF NMs have higher activity towards gram positive bacteria with an average inhibition zone of 19 mm. This synthesized LCF NMs is a multi-functional material with stable and eco-friendly materials.

Synergistic effect of a Bi2Zr2O7 and hydroxyapatite composite: organic pollutant remediation, antibacterial and electrochemical sensing applications

Global concern regarding the energy crisis and environmental pollution is increasing. The fabrication of efficient catalysts remains a long-term goal. Recently, green synthesis methods for catalyst fabrication have attracted the scientific community. Herein, a simple approach to synthesize bismuth zirconate-hydroxyapatite (BZO-HA) nanocomposites using Mentha spicata (mint) leaves as a reducing agent via a combustion method has been reported. The use of a green reducing agent provided economic attributes to this work. Among the prepared samples, the BZO-HA (20%) composite exhibited superior photocatalytic activity. The photodegradation efficiency of the composite reached 90.3% and 98.4% for methylene blue (MB) and rose Bengal (RB) dyes, respectively. The results showed the excellent optical performance of the prepared composites. The constructed sensor (BZO-HA 20%) for the very first time showed outstanding selectivity and performance towards sensing lead nitrate and dextrose compared to bare bismuth zirconate (BZO) and hydroxyapatite (HA). A three-electrode system using 0.1 M KCl was used for the study. The synthesized composite BZO-HA (20%) can sense lead nitrate and dextrose over the concentration range of 1-5 mM in the potential range from -1.0 V to +1.0 V. The BZO-HA composite was also investigated against Gram-negative (S. typhi) and Gram-positive (S. aureus) bacteria for antibacterial activity studies. Enhanced antibacterial activity was observed compared to bare BZO and HA catalysts. Thus, the prepared BZO-HA nanocomposite exhibited multifunctional applications.

Construction of SrTiO3-BiOCl composite catalyst via facial microwave hydrothermal for highly efficient photocatalytic activity towards organic compounds degradation

This work mainly focuses on the preparation and performance study of SrTiO₃-BiOCl composite photocatalysis. The SrTiO₃-BiOCl photocatalysts are prepared via the facial microwave hydrothermal method. XRD, UV-vis DRS, SEM, TEM, XPS, N₂ adsorption and desorption isothermal experiment, FT-IR, and PL are applied to characterize the prepared samples. The spherical particles of SrTiO₃ grow on the flaky BiOCl, and the crystal size is uniform and evenly disperses on the BiOCl. The catalytic performance of the samples was evaluated over the degradation rates of methylene blue(MB). Typically, the clearance rates of MB reached to 99.65% over SrTiO₃-BiOCl-50% under visible light, which was much higher than that of SrTiO₃ and BiOCl (55.86%, 79.79%, respectively). The active species capturing experiments and ESR showed that the holes (h⁺) and ·OH are playing the main roles in the degradation process.

Phenol red dye removal from wastewater using TiO2-FSM-16 and Ni-FSM-16 photocatalysts

In this study, the performance of Ni-FSM-16 and TiO₂-FSM-16 photocatalysts in phenol red removal was explored. The XRD, FE-SEM, and BET tests were used to characterize the catalysts. All experiments were performed at ambient temperature and under UV (20 W). The parameters including dye concentration (20-80 mg/L), photocatalyst concentration (0-8 g/L), UV exposure duration, and contact time (0-160 min) were optimized using RSM software. BET values of Ni-FSM-16 and TiO₂-FSM-16 were 718.63 m²/g and 844.93 m²/g, respectively. TiO₂-FSM-16 showed better performance in dye removal than Ni-FSM-16. At pH 3, the maximum dye removal by TiO₂-FSM-16/UV and Ni-FSM-16/UV was obtained 87% and 64%, respectively. The positive hole species had the main role in photocatalytic phenol red removal. The reusability study was done for up to 7 cycles, but the catalysts can be reused effectively for up to 3 cycles. The synergistic factor for the TiO₂-FSM-16 and TiO₂-FSM-16/UV processes were calculated to be 1.55 and 2.12, respectively. The dye removal efficiency by TiO₂-carbon and Ni-carbon was slightly lower than those obtained by the FSM-16 ones. The TiO₂-FSM-16 and Ni-FSM-16 catalysts had a suitable surface and acceptable efficiency in phenol red removal.

Crystallinity and lattice vacancies of different mesoporous g-C3N4 for photodegradation of tetracycline and its cytotoxic implication

Tetracycline (TC) antibiotic removal from water bodies is important to provide clean water and sanitation. Mesoporous graphitic carbon nitride (GCN) photocatalyst derived from three different types of precursors manages to remove TC effectively under visible light irradiation. Among urea, thiourea, and melamine precursors, melamine-prepared GCN (MGCN) via thermal polymerization has the highest efficiency to photodegrade tetracycline (TC) antibiotics up to 99.5% (0.0122 min^-1) within 240 min. The COD for TC removal by using MGCN was up to 77.5% after 240 min of degradation. This is due to the slow charge recombination and rapid charge carrier migration. The MGCN encounters different properties such as high crystallinity, dense structure allowing fast charges migration, and nitrogen vacancies that create a defect state that suppresses charge recombination. It was found that the conduction band (CB) of MGCN was located at a more negative position (E_CB = -0.33 V) than (O₂/O₂^•-) and the valence band (VB) was placed at a more positive position (E_VB = 2.30 V) than (H₂O/OH^•), which allows generation of both radicals for photodegradation. Based on the cell viability test, the photodegraded TC in the water how non-toxicity toward Balb/c 3T3 cells after being irradiated (λ > 420 nm) for 240 min under visible light. The MGCN prepared in this study demonstrated the highest effectiveness and recyclable photocatalyst for the removal of TC among all GCNs.

Eco-Friendly Reduction of Graphene Oxide by Aqueous Extracts for Photocatalysis Applications

In the present work, reduced graphene oxide was obtained by green synthesis, using extracts of Larrea tridentata (gobernadora) and Capsicum Chinense (habanero). Graphene oxide was synthesized by the modified Hummers' method and subsequently reduced using natural extracts to obtain a stable and environmentally friendly graphene precursor. Consequently, the gobernadora aqueous extract was found to have a better reducing power than the habanero aqueous extract. This opportunity for green synthesis allows the application of RGO in photocatalysis for the degradation of the methylene blue dye. Degradation efficiencies of 60% and 90% were obtained with these materials.

Synthesis of novel graphene aerogel encapsulated bismuth oxyiodide composite towards effective removal of methyl orange azo-dye under visible light

Development of novel and eco-friendly composite photocatalysts for the efficient removal of contaminants from wastewater is the need of the hour. In this study, visible light responsive novel graphene aerogel/bismuth oxyiodide (GA/BiOI) composite was synthesized via low-temperature solvothermal method. The synthesized GA/BiOI composite was tested for methyl orange (MO) azo-dye degradation under visible light. The graphene aerogel nanosheets were wrapped onto the surface of the each individual BiOI microsphere, which encourages the interconnection charge transfer process. The light absorption properties of GA/BiOI composite were increased with the addition of graphene aerogel. The optimal 5%-GA/BiOI composite displayed higher MO removal efficiency, which is ∼2 fold more than the bare BiOI photocatalyst. This enhanced photocatalytic activity was on account of lower recombination rate of charge carriers, improved light absorption, and the high surface area. In addition, the 5%-GA/BiOI composite showed good stability until 3 cycles without deactivation. The plausible MO degradation mechanism was also proposed over GA/BiOI under visible light. This work provides a new perspective on the design and synthesis of graphene aerogel-based composite for environmental applications.

Thin Films (FTO/BaTiO3/AgNPs) for Enhanced Piezo-Photocatalytic Degradation of Methylene Blue and Ciprofloxacin in Wastewater

In this study, we investigate the ability of barium titanate/silver nanoparticles (BaTiO₃/AgNPs) composites deposited on a fluorine-doped tin oxide (FTO) glass using tape-casting method to produce piezoelectric thin film (FTO/BaTiO₃/AgNPs) for piezocatalytic, photocatalytic, and piezo-photocatalytic degradation of methylene blue (MB) and ciprofloxacin (CIP) in wastewater. The prepared piezoelectric materials (BaTiO₃ and BaTiO₃/AgNPs) were characterized using XRD, SEM, TEM, EDS, UV-DRS, TGA, PL, BET, EIS, and chronoamperometry. The UV-DRS showed the surface plasmon resonance (SPR) of Ag nanoparticles on the surface of BaTiO₃ at a wavelength of 505 nm. The TEM images revealed the average Ag nanoparticle size deposited on the surface of BaTiO₃ to be in the range of 10-15 nm. The chronoamperometry showed that the photoreduction of silver nanoparticles (AgNPs) onto BaTiO₃ (BTO) resulted in a piezo-electrochemical current enhancement from 0.24 to 0.38 mA. The composites (FTO/BaTiO₃/AgNPs) achieved a higher degradation of MB and CIP when the photocatalysis and piezocatalysis processes were merged. Under both ultrasonic vibration and UV light exposure, FTO/BTO/AgNPs degraded about 72 and 98% of CIP and MB from wastewater, respectively. These piezoelectric thin films were shown to be efficient and reusable even after five cycles, suggesting that they are highly stable. Furthermore, the reactive oxygen species studies demonstrated that hydroxyl radicals (·OH) were the most effective species during degradation of MB, with minor superoxide radicals (·O₂ ^-) and holes (h⁺). From this study, we were able to show that these materials can be used as multifunctional materials as they were able to degrade both the dye and pharmaceutical pollutants. Moreover, they were more efficient through the piezo-photocatalytic process.

Rapid Degradation of Rhodamine B through Visible-Photocatalytic Advanced Oxidation Using Self-Degradable Natural Perylene Quinone Derivatives-Hypocrellins

Hypocrellins (HYPs) are natural perylene quinone derivatives from Ascomycota fungi. Based on the excellent photosensitization properties of HYPs, this work proposed a photocatalytic advanced oxidation process (PAOP) that uses HYPs to degrade rhodamine B (RhB) as a model organic pollutant. A synergistic activity of HYPs and H2O2 (0.18 mM of HYPs, 0.33% w/v of H2O2) was suggested, resulting in a yield of 82.4% for RhB degradation after 60 min under visible light irradiation at 470−475 nm. The principle of pseudo-first-order kinetics was used to describe the decomposition reaction with a calculated constant (k) of 0.02899 min−1 (R2 = 0.983). Light-induced self-degradation of HYPs could be activated under alkaline (pH > 7) conditions, promising HYPs as an advanced property to alleviate the current dilemma of secondary pollution by synthetic photocatalysts in the remediation of emerging organic pollutants.

ZnO Semiconductor Nanoparticles and Their Application in Photocatalytic Degradation of Various Organic Dyes

The biosynthesis of oxide semiconductor nanoparticles (NPs) using materials found in nature opens a wide field of study focused on sustainability and environmental protection. Biosynthesized NPs have the capacity to eliminate organic dyes, which pollute water and cause severe damage to the environment. In the present work, the green synthesis of zinc oxide (ZnO) NPs was carried out using Capsicum annuum var. Anaheim extract. The photocatalytic elimination of methylene blue (MB), methyl orange (MO), and Rhodamine B (RhB) in UV radiation was evaluated. The materials were characterized by scanning and transmission electron microscopy (SEM and TEM) and SEM-coupled energy dispersive spectroscopy (EDS), attenuated total reflectance-infrared (ATR-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Photoluminescence (PL), and ultraviolet-visible spectroscopy (UV-Vis). The TEM analysis showed the NPs have an average size of 40 nm and quasi-spherical shape. ATR-IR showed the ZnO NPs contained functional groups from the extract. The analysis through XRD indicated that the NPs have a hexagonal zincite crystal structure with an average crystallite size of approximately 17 nm. The photoluminescence spectrum (PL) presented an emission band at 402 nm. From the UV-Vis spectra and TAUC model, the band-gap value was found to be 2.93 eV. Finally, the photocatalytic assessment proved the ZnO NPs achieved 100% elimination of MB at 60 min exposure, and 85 and 92% degradation of MO and RhB, respectively, at 180 min. This indicates that ZnO NPs, in addition to using a friendly method for their synthesis, manage to have excellent photocatalytic activity in the degradation of various organic pollutants.

High Degradation of Methylene Blue Using a New Nanocomposite Based on Zeolitic Imidazolate Framework-8

The development of broad-spectrum ultraviolet- and visible-light photocatalysts constitutes one of the most significant challenges in the field of photocatalytic pollutant removal. Here, the efficiency of the directly prepared nitrogen-doped quantum zeolitic imidazolate framework (ZIF)-8-dot catalyst for the photocatalytic degradation of the methylene blue dye was reported. The prepared catalysts were characterized using Brunauer-Emmett-Teller, X-ray diffraction, ultraviolet-visible spectroscopy, photoluminescence spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy techniques. Under sunlight irradiation, the 1% nitrogen-doped quantum-ZIF-8-dot catalyst showed 75% photodegradation in half an hour and ≈93% photodegradation after 3 hours compared to ≈87% for the ZIF-8 metal-organic framework. The high performance of the 1% nitrogen-doped quantum-ZIF-8-dot catalyst was attributed to the synergism between the catalyst components, upconverted fluorescence property of nitrogen-doped quantum dots, and charge (electrons-holes) separation. The reactive radical test revealed that the hydroxyl radical was dominant. The step-scheme heterojunction mechanism for photocatalytic degradation was also deduced. The kinetic study through the photocatalytic isotherms revealed that the pseudo-first-order kinetic model can describe the reaction mechanism.

Improved Photocatalytic Activity of Polysiloxane TiO2 Composites by Thermally Induced Nanoparticle Bulk Clustering and Dye Adsorption

Fine control of nanoparticle clustering within polymeric matrices can be tuned to enhance the physicochemical properties of the resulting composites, which are governed by the interplay of nanoparticle surface segregation and bulk clustering. To this aim, out-of-equilibrium strategies can be leveraged to program the multiscale organization of such systems. Here, we present experimental results indicating that bulk assembly of highly photoactive clusters of titanium dioxide nanoparticles within an in situ synthesized polysiloxane matrix can be thermally tuned. Remarkably, the controlled nanoparticle clustering results in improved degradation photocatalytic performances of the material under 1 sun toward methylene blue. The resulting coatings, in particular the 35 wt % TiO2-loaded composites, show a photocatalytic degradation of about 80%, which was comparable to the equivalent amount of bare TiO2 and two-fold higher with respect to the corresponding composites not subjected to thermal treatment. These findings highlight the role of thermally induced bulk clustering in enhancing photoactive nanoparticle/polymer composite properties.

RSM-Based Preparation and Photoelectrocatalytic Performance Study of RGO/TiO2 NTs Photoelectrode

In this paper, reduced graphene oxide (RGO) was prepared by a modified Hummers method and chemical reduction method, and an RGO/TiO2 NTs (RGO/TiO2 nanotubes) photoelectrode was prepared by the electrochemical deposition method. The as-prepared RGO/TiO2 NTs were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD), and their photocatalytic activities were investigated by measuring the degradation of methylene blue (MB) under simulated solar light irradiation. The SEM and XRD results indicated that the original tubular structure of TiO2-NTs was not changed after RGO modification. The surface of the TiO2 NTs photoelectrode was covered with a non-uniform, flake-shaped reduced graphene oxide film. The thickness of the RGO/TiO2 NTs was increased to about 22.60 nm. The impedance of the RGO/TiO2 NTs was smaller than that of the TiO2 NT photoelectrode. The optimal preparation conditions of RGO/TiO2 NT photoelectrodes were investigated by using a single factor method and response surface method. The best preparation conditions were as follows: deposition potential at 1.19 V, deposition time of 10.27 min, and deposition temperature at 24.94 °C.

Resource recovery from landfill leachate: An experimental investigation and perspectives

This work investigates the performances of coconut shell waste-based activated carbon (CSWAC) adsorption in batch studies for removal of ammoniacal nitrogen (NH₃-N) and refractory pollutants (as indicated by decreasing COD concentration) from landfill leachate. To valorize unused resources, coconut shell, recovered and recycled from agricultural waste, was converted into activated carbon, which can be used for leachate treatment. The ozonation of the CSWAC was conducted to enhance its removal performance for target pollutants. The adsorption mechanisms of refractory pollutants by the adsorbent are proposed. Perspectives on nutrient recovery technologies from landfill leachate from the view-points of downstream processing are presented. Their removal efficiencies for both recalcitrant compounds and ammoniacal nitrogen were compared to those of other techniques reported in previous work. It is found that the ozonated CSWAC substantially removed COD (i.e. 76%) as well as NH₃-N (i.e. 75%), as compared to the CSWAC without pretreatment (i.e. COD: 44%; NH₃-N: 51%) with NH₃-N and COD concentrations of 2750 and 8500 mg/L, respectively. This reveals the need of ozonation for the adsorbent to improve its performance for the removal of COD and NH₃-N at optimized reactions: 30 g/L of CSWAC, pH 8, 200 rpm of shaking speed and 20 min of reaction time. Nevertheless, treatment of the leachate samples using the ozonated CSWAC alone was still unable to result in treated effluents that could meet the COD and NH₃-N discharge standards below 200 and 5 mg/L, respectively, set by legislative requirements. This reveals that another treatment is necessary to be undertaken to comply with the requirement of their effluent limit.

Chemical Degradation of Methylene Blue Dye Using TiO2/Au Nanoparticles

Gold nanoparticles (~10 nm) were deposited on titanium dioxide nanoparticles (~21 nm) and the material obtained was characterized using IR, UV-Vis, N2 adsorption-desorption isotherm, DLS, EDS (EDX), TEM, XPS, and XRD techniques. It was found that the methylene blue dye is degraded in the presence of this material when using hydrogen peroxide as the oxidant. Tests were performed at 2, 4, 6, and 24 h, with hydrogen peroxide contents varying from 1 to 5 mg/mL. Longer exposure time and a higher content of oxidant led to the degradation of methylene blue dye at up to 90%. The material can be reused several times with no loss of activity.

Resource recovery toward sustainability through nutrient removal from landfill leachate

This study investigated the feasibility of integrated ammonium stripping and/or coconut shell waste-based activated carbon (CSWAC) adsorption in treating leachate samples. To valorize unused biomass for water treatment application, the adsorbent originated from coconut shell waste. To enhance its performance for target pollutants, the adsorbent was pretreated with ozone and NaOH. The effects of pH, temperature, and airflow rate on the removal of ammoniacal nitrogen (NH₃-N) and refractory pollutants were studied during stripping alone. The removal performances of refractory compounds in this study were compared to those of other treatments previously reported. To contribute new knowledge to the field of study, perspectives on nutrients removal and recovery like phosphorus and nitrogen are presented. It was found that the ammonium stripping and adsorption treatment using the ozonated CSWAC attained an almost complete removal (99%) of NH₃-N and 90% of COD with initial NH₃-N and COD concentrations of 2500 mg/L and 20,000 mg/L, respectively, at optimized conditions. With the COD of treated effluents higher than 200 mg/L, the combined treatments were not satisfactory enough to remove target refractory compounds. Therefore, further biological processes are required to complete their biodegradation to meet the effluent limit set by environmental legislation. As this work has contributed to resource recovery as the driving force of landfill management, it is important to note the investment and operational expenses, engineering applicability of the technologies, and their environmental concerns and benefits. If properly managed, nutrient recovery from waste streams offers environmental and socio-economic benefits that would improve public health and create jobs for the local community.

Arsenic removal in aqueous solutions using FeS2

This study tested the technical feasibility of pyrite and/or persulfate oxidation system for arsenic (As) removal from aqueous solutions. The effects of persulfate on As removal by the pyrite in the integrated treatment were also investigated. Prior to the persulfate addition into the reaction system, the physico-chemical interactions between As and the pyrite alone in aqueous solutions were explored in batch studies. The adsorption mechanisms of As by the adsorbent were also presented. At the same As concentration of 5 mg/L, it was found that As(III) attained a longer equilibrium time (8 h) than As(V) (2 h), while the pyrite worked effectively at pH ranging from 6 to 11. At optimum conditions (0.25 g/L of pyrite, pH 8.0 and 5 mg/L of As(III) concentration), the addition of persulfate (0.5 mM) into the reaction promoted a complete removal of arsenic from the solutions. Consequently, this enabled the treated effluents to meet the arsenic maximum contaminant limit (MCL) of <10 μg/L according to the World Health Organization (WHO)'s requirements. The redox mechanisms, which involved electron transfer from the S₂^2- of the pyrite to Fe³⁺, supply Fe²⁺ for persulfate decomposition, oxidizing As(III) to As(V). The sulfur species played roles in the redox cycle of the Fe³⁺/Fe²⁺ of the pyrite by giving its electrons, while the As(III) oxidation to As(V) was attributed to the pyrite. Overall, this work reveals the applicability of the pyrite as an adsorbent for water treatment and the importance of persulfate addition to promote a complete As removal from aqueous solutions.

Biologically reduced graphene oxide as a green and easily available photocatalyst for degradation of organic dyes

The disposal of untreated textile industrial wastewater having unmanageable pollutants is a global issue. Eco-friendly remediation technology is needed for the removal of environmental contaminants. In this study, a simple hydrothermal method is adapted to synthesis reduced graphene oxide (PErGO) using Phyllanthus emblica fruits extract and used as a photocatalyst for the degradation of synthetic toxic dyes. The physicochemical properties of green synthesized PErGO are confirmed using UV-Vis spectroscopy, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction. The I_D/I_G ratio is found as 1.02 for GO which is improved to 1.15 for PErGO, which confirms the existence of unrepaired defects after the elimination of negatively charged O₂ moieties from the surface of GO. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis show well-exploited PErGO morphology. The photocatalytic removal of methylene blue (MB) and methyl orange (MO) dyes is confirmed using UV-vis spectrophotometer. PErGO shows about 92% of MO and 91% of MB degradation within 90 min of sunlight exposure while carried out as a mixed dye degradation. The sustainability of this catalyst is confirmed by testing it for five subsequent degradation cycles and noticed a stable and significant degradation activity. Outcomes from this study suggest that eco-friendly PErGO can be used as an alternate sustainable material to treat a large volume of wastewater from various dye industries.

Recovering heavy metals from electroplating wastewater and their conversion into Zn2Cr-layered double hydroxide (LDH) for pyrophosphate removal from industrial wastewater

This work incorporated technological values into Zn₂Cr-layered double hydroxide (LDH), synthesized from unused resources, for removal of pyrophosphate (PP) in electroplating wastewater. To adopt a resource recovery for the remediation of the aquatic environment, the Zn₂Cr-LDH was fabricated by co-precipitation from concentrated metals of plating waste that remained as industrial by-products from metal finishing processes. To examine its applicability for water treatment, batch experiments were conducted at optimum M²⁺/M³⁺, pH, reaction time, and temperature. To understand the adsorption mechanisms of the PP by the adsorbent, the Zn₂Cr-LDH was characterized using Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analyses before and after adsorption treatment. An almost complete PP removal was attained by the Zn₂Cr-LDH at optimized conditions: 50 mg/L of PP, 1 g/L of adsorbent, pH 6, and 6 h of reaction. Ion exchange controlled the PP removal by the adsorbent at acidic conditions. The PP removal well fitted a pseudo-second-order kinetics and/or the Langmuir isotherm model with 79 mg/g of PP adsorption capacity. The spent Zn₂Cr-LDH was regenerated with NaOH with 86% of efficiency for the first cycle. The treated effluents could comply with the discharge limit of <1 mg/L. Overall, the use of the Zn₂Cr-LDH as a low-cost adsorbent for wastewater treatment has contributed to national policy that promotes a zero-waste approach for a circular economy (CE) through a resource recovery paradigm.

Cross-linked sulfydryl-functionalized graphene oxide as ultra-high capacity adsorbent for high selectivity and ppb level removal of mercury from water under wide pH range

It is highly desirable but remains extremely challenging to develop a facile strategy to prepare adsorbent for dealing with heavy metal pollution in water. Here, we report a facile approach for preparing sulfydryl-functionalized graphene oxide (S-GO) by cross-linking method with an unprecedented adsorption capacity and ultrahigh selectivity for efficient Hg(II) removal. The adsorbents exhibit a prominent performance in capturing Hg(II) from wastewater with a record-high adsorption capacity of 3490 mg/g and rapid kinetics to reduce Hg(II) contaminants below the discharge standard of drinking water (2 ppb) within 60 min under a wide pH range even in the coexistent of other interfering metal ions. In addition, the adsorbents can be also easily recycled and reused multiple times with no apparent decline in removal efficiency. Considering the broad diversity, we developed also a magnetic Fe₃O₄/S-GO adsorbent by a simple chemical cross-linking reaction to achieve rapid separation of S-GO from their aqueous solution. In addition, the adsorbents were successfully applied in dealing with the practical industrial wastewater. The results indicate the potential of rationally designed sulfydryl-functionalized graphene oxide for high performance Hg(II) removal.

Design and optimization of a hybrid process based on hollow-fiber membrane/coagulation for wastewater treatment

Treatment of textile wastewater using ultrafiltration membranes was carried out in this study. Since membrane fouling is a major operational problem that decreases the membrane separation efficiency, wastewater was treated with polyaluminum chloride (PACl) and alum (aluminum sulfate) as coagulant to decrease the fouling of ultrafiltration membranes. PACl was selected as the best coagulant in the experiments. Also, chitosan was used as coagulant aid upon developing the hybrid process. The obtained optimum dosage of PACl coagulant was 100 mg/L, and maximum turbidity and COD removal of 35% and 66% were attained, respectively. The pretreated wastewater by coagulation was sent to ultrafiltration process for further removal of turbidity and COD. Three ultrafiltration hollow-fiber membranes made of polypropylene (PP), polyvinylidene fluoride (PVDF), and polyethersulfone (PES) were applied in this study. In general, the filtration results were evaluated for two types of samples treated under coagulation and without treatment; the results were unfavorable for the second type. The effects of transmembrane pressure (TMP) and cross velocity on membranes performance were also investigated for process optimization. The obtained results showed that PVDF membrane had the highest flux and turbidity removal, whereas the PES membrane had the highest COD removal. Also, the results revealed that turbidity and COD removal by all membranes were decreased by increasing TMP and cross velocity.

Rhodium doping augments photocatalytic activity of barium titanate: effect of electronic structure engineering

Environmentally friendly BaTiO₃ is emerging as a potential photocatalyst due to its tunable electronic structure. Although originally believed to be a poor photocatalyst due to its wide band gap, several strategies have been implemented to reduce its band gap. One such approach is doping, but this often leads to the formation of mid gap recombination centers and diminishes the efficiency of the material. In the present work, we study for the first time the effect of site occupancy of Rh on the electronic structure of BaTiO₃. As the theoretical results reveal that if Rh occupies both Ba and Ti sites simultaneously it leads to the formation of mid gap states, an experimental approach is implemented to reduce the band gap of BaTiO₃ while simultaneously avoiding the formation of recombination centers. The facile one pot hydrothermal approach reported here directs the Rh towards Ba sites leading to a decrease in the band gap due to the appearance of donor Rh³⁺ states, suppressing the formation of Rh⁴⁺ states. A promising photocatalytic activity of 96% degradation of methylene blue dye in 120 minutes was observed for the 0.5 Rh sample indicating the high efficiency of the material.

In situ intercalation and exploitation of Co3O4 nanoparticles grown on carbon nitride nanosheets for highly efficient degradation of methylene blue

The low surface area, poor electrical conductivity, and rapid electron-hole recombination in bulk C3N4 limit its photocatalytic activity, which makes it challenging to improve the performance of bulk C3N4. Herein, an effective strategy is proposed to fabricate Co3O4/C3N4 heterojunctions (Co3O4 nanoparticles grown on C3N4 nanosheets), where bulk C3N4 is exfoliated to thin nanosheets. The bulk C3N4 precursor was synthesized with the hydrothermal treatment of melamine solution, and Co2+ ions were then inserted into the interlayer of the precursor through a vacuum-assisted intercalation process. Subsequently, the precursor was exfoliated to C3N4 nanosheets, and 15 nm Co3O4 nanoparticles were simultaneously formed using in situ thermal polycondensation. The Brunauer-Emmett-Teller (BET) specific surface area of the prepared heterojunction was 21 times higher than that of bulk C3N4, and thus more active sites were exposed on the surface of the heterostructure. Co3O4 nanoparticles contained oxygen vacancies, and the type-II transfer mechanism between these nanoparticles and C3N4 could be used to effectively separate photogenic carriers and improve the electron mobility. As expected, the heterostructure exhibited an excellent photocatalyzed degradation rate of 99.5% for methylene blue within 30 min (10 mg catalyst, wavelength >420 nm) under visible light irradiation, which was nearly three times higher than that of bulk C3N4. Electron paramagnetic resonance (EPR) analysis indicated that ˙O2- was the main reactive oxidizing species during the degradation process.

Textiles wastewater treatment technology: A review

The following is a review of published literature on textile wastewater in 2019. Presented are the sections described for the review: concise introduction on the textiles wastewater, followed by a review of present textile treatment technologies organized by physicochemical, biological, and combined processes. Lastly, a discussion of the future topics is presented. PRACTITIONER POINTS: The discharge of textile dye wastewater represents a serious environmental problem and public health concern. Effluents from textile manufacturing, dyeing, and finishing processes contain high-concentration recalcitrant chemicals that are resistant to biodegradation. The textile wastewater needs environmental-friendly and cost-effective combined treatment process.

Functionalizing TiO2 with graphene oxide for enhancing photocatalytic degradation of methylene blue (MB) in contaminated wastewater

Methylene blue is a refractory pollutant commonly present in textile wastewater. This study tests the feasibility of TiO₂/graphene oxide (GO) composite in enhancing photocatalytic degradation of MB in synthetic wastewater with respect to scientific and engineering aspects. To enhance its removal, we vary the composition of the composite based on the TiO₂ weight. Under UV-vis irradiation, the effects of photocatalyst's dose, pH, and reaction time on MB removal by the composites are evaluated under optimum conditions, while any changes in their physico-chemical properties before and after treatment are analyzed by using TEM, SEM, XRD, FTIR and BET. The photodegradation pathways of the target pollutant by the composite and its removal mechanisms are also elaborated. It is found that the same composite with a 1:2 wt ratio of GO/TiO₂ has the largest surface area of 104.51 m²/g. Under optimum reactions (0.2 g/L of dose, pH 10, and 5 mg/L of pollutant's concentration), an almost complete MB removal could be attained within 4 h. This result is higher than that of the TiO₂ alone (30%) under the same conditions. Since the treated effluents could meet the strict discharge standard limit of ≤0.2 μg/L set by China's regulation, subsequent biological treatments are unnecessary for completing biodegradation of remaining oxidation by-products in the wastewater effluents.

Fabrication, characterization, and application of ternary magnetic recyclable Bi2WO6/BiOI@Fe3O4 composite for photodegradation of tetracycline in aqueous solutions

We aim at fabricating a ternary magnetic recyclable Bi₂WO₆/BiOI@Fe₃O₄ composite that could be applied for photodegradation of tetracycline (TC) from synthetic wastewater. To identify any changes with respect to the composite's morphology and crystal structure properties, ΧRD, FTIR, FESEM-EDS, PL and VSM analyses are carried out. The effects of Fe₃O₄ loading ratio on the Bi₂WO₆/BiOI for TC photodegradation are evaluated, while operational parameters such as pH, reaction time, TC concentration, and photocatalyst's dose are optimized. Removal mechanisms of the TC by the composite and its photodegradation pathways are elaborated. With respect to its performance, under the same optimized conditions (1 g/L of dose; 5 mg/L of TC; pH 7; 3 h of reaction time), the Bi₂WO₆/BiOI@5%Fe₃O₄ composite has the highest TC removal (97%), as compared to the Bi₂WO₆ (63%). After being saturated, the spent photocatalyst could be magnetically separated from solution for subsequent use. In spite of three consecutive cycles with 71% of efficiency, the spent composite still has reasonable photocatalytic activities for reuse. Overall, this suggests that the composite is a promising photocatalyst for TC removal from aqueous solutions.