On-site investigation of the concentration and size distribution characteristics of airborne fungi in a university library

Indoor/Outdoor airborne microbiome characteristics in residential areas across four seasons and its indoor purification

Bioaerosols are more likely to accumulate in the residential environment, and long-term inhalation may lead to a variety of diseases and allergies. Here, we studied the distribution, influencing factors and diffusion characteristics of indoor and outdoor microbiota pollution in six residential buildings in Guangzhou, southern China over a period of one year. The results showed that the particle sizes of bioaerosol were mainly in the range of inhalable particle size (<4.7 μm) with a small difference among four seasons (74.61 % ± 2.17 %). The microbial communities showed obvious seasonal differences with high abundance in summer, but no obvious geographical differences. Among them, the bacteria were more abundant than the fungi. The dominant microbes in indoor and outdoor environments were similar, with Anoxybacillu, Brevibacillus and Acinetobacter as the dominant bacteria, and Cladosporium, Penicillium and Alternaria as the dominant fungi. The airborne microbiomes were more sensitive to temperature and particulate matter (PM2.5, PM10) concentrations. Based on the Sloan neutral model, bacteria were more prone to random diffusion than fungi, and the airborne microbiome can be randomly distributed in indoor and outdoor environments and between the two environments in each season. Bioaerosol in indoor was mainly from outdoor. The health risk evaluation showed that the indoor inhalation risks were higher than those outdoor. The air purifier had a better removal efficiency on 1.1-4.7 μm microorganisms, and the removal efficiency on Gram-negative bacteria was better than that on Gram-positive bacteria. This study is of great significance for the risk assessment and control of residential indoor bioaerosol exposure.

Impact of climate zones and seasons on indoor airborne microbial communities: Insights from a comprehensive analysis

Bacteria and fungi are ubiquitous throughout built environments and are suspended in the air, potentially affecting human health. However, the impacts of climate zones on the diversity, structure, and stochastic assembly of indoor airborne microbes remain unknown. This study comprehensively analyzed indoor airborne microbes across five climate zones in China during the summer and winter using high-throughput sequencing. The diversity and structure of indoor airborne communities vary across climatic zones. A random forest model was used to identify biomarkers in different climate zones. The results showed no relationship between the biomarkers and their rankings in mean relative abundance. The Sloan neutral model fitting results indicated that the impact of climate zones on the stochastic process in the assembly of indoor airborne microbes was considerably more important than that of seasons. Additionally, the influence of seasons on the diversity, structure, and stochastic assembly process of indoor airborne microbes differed among different climate zones. The diversity, structure, and stochastic assembly processes of bacteria present distinctive outcomes in climate zones and seasons compared with those of fungi. Overall, these findings indicate that customized strategies are necessary to manage indoor airborne microbial communities in each climate zone, season, and for specific microbial species.

Comprehensive insights into advances in ambient bioaerosols sampling, analysis and factors influencing bioaerosols composition

While the study of bioaerosols has a long history, it has garnered heightened interest in the past few years, focusing on both culture-dependent and independent sampling and analysis approaches. Observations have been made regarding the seasonal fluctuations in microbial communities and their connection to particular ambient atmospheric factors. The study of airborne microbial communities is important in public health and atmospheric processes. Nevertheless, the establishment of standardized protocols for evaluating airborne microbial communities and utilizing microbial taxonomy as a means to identify distinct bioaerosols sources and seasonal patterns remains relatively unexplored. This article discusses the challenges and limitations of ambient bioaerosols sampling and analysis, including the lack of standardized methods and the heterogeneity of sources. Future prospects in the field of bioaerosols, including the use of high-throughput sequencing technologies, omics studies, spectroscopy and fluorescence-based monitoring to provide comprehensive incite on metabolic capacity, and activity are also presented. Furthermore, the review highlights the factors that affect bioaerosols composition, including seasonality, atmospheric conditions, and pollution levels. Overall, this review provides a valuable resource for researchers, policymakers, and stakeholders interested in understanding and managing bioaerosols in various environments.

Opportunistic Mycobiota of Dust in Cities of Different Climate Zones: Murmansk and Moscow

For the first time, mycological analysis of dust, including assessment of opportunistic fungal species, was carried out for the urban ecosystems of air, vegetation, and paved surfaces in different climate areas (the cities of Murmansk and Moscow). The combined effect of environmental factors (climate, functional zone, and substrate type) on qualitative and quantitative parameters of micromycete communities was assessed using MANOVA and cluster analysis. It was found that the abundance of culturable mycobiota in the air, on tree leaves, and on paved surfaces was lower in Murmansk than in Moscow. In both cities, approximately a half of fungal species were opportunistic pathogens. The relative abundance of opportunistic fungi of the BSL-2 group was higher in the air of the traffic zone in both cities and of the residential zone in Moscow. In the residential and traffic zones of Moscow, the most abundant species in the air in on the road dust were Aspergillus fumigatus and A. niger, while in Murmansk communities were dominated by members of the genera Cephalosporium, Scopulariopsis, and Trichoderma, which are less pathogenic for humans. The most significant factors affecting the abundance and species diversity of micromycetes, including opportunistic fungi, were the substrate type (air, leaves, or paved surfaces) and the climate, while the effect of the functional zone was not significant. The recreation zones of cities located in different climate regions are the most favorable for humans due to lower abundance of opportunistic fungi in the air and to lack of micromycetes of the BSL-2 and BSL-3 groups. However, the abundance of potentially pathogenic species on the surfaces of leaves and roads in this zone was higher than in the air. Therefore, it can be recommended that city residents minimize their contact with the leaves surface and road pavements, which is especially relevant for toddlers, so as to diminish the probability of encountering opportunistic mycobiota that potentially represents a health hazard.

Seasonal dynamics of airborne culturable fungi and its year-round diversity monitoring in Dahuting Han Dynasty Tomb of China

Dahuting Han Dynasty Tomb, famous for its magnificent and realistic murals in China, was selected for a year-long study as the research target in relation to microbiological degradation of cultural heritage. This dissertation has investigated the predominant genera of the airborne fungal microbial community in Dahuting and analyzed the seasonal distribution characteristics and temporal-spatial particle size distribution of the fungi in a tomb environment. The combination of culture-dependent and high-throughput sequencing methods was utilized for counting the collected fungi and identifying the strains. Results showed that seasonal dynamics significantly affect the fungal concentration, with higher-level concentrations observed in spring and autumn. However, seasonal variation has little effect on the fungal particle size distribution characteristic trend, and the higher concentration invariably appeared in stage IV to VI (0.65-3.3 μm) of the Andersen six-stage sieve impactor. The ITS (Internal Transcribed Spacer) rRNA gene-based sequences disclosed a high airborne culturable fungal abundance, dominated by Talaromyces spp. (20%-38.4%), followed by Aureobasidium spp. (19.4%-25.6%), Penicillium spp. (10.8%-23.9%) and Aspergillus spp. (8.2%-23.1%). Our research provides valuable information for reasonable protection measures and scientific prevention work of the murals in Dahuting Han Dynasty Tomb.

Characteristics of annual mold variations and association with childhood allergic symptoms/diseases via combining surveys and home visit measurements

The presence of dampness and visible molds leads to concerns of poor indoor air quality which has been consistently linked with increased exacerbation and development of allergy and respiratory diseases. Due to the limitations of epidemiological surveys, the actual fungal exposure characteristics in residences has not been sufficiently understood. This study aimed to characterize household fungal diversity and its annual temporal and spatial variations. We developed combined cross-sectional survey, repeated air sampling around a year, and DNA sequencing methods. The questionnaire survey was conducted in 2019, and 4943 valid cases were received from parents; a follow-up case-control study (11 cases and 12 controls) was designed, and onsite measurements of indoor environments were repeated in typical summer, transient season, and winter; dust from floor and beddings in children's room were collected and ITS based DNA sequencing of totally 68 samples was conducted. Results from 3361 children without changes to their residences since birth verified the significant associations of indoor dampness/mold indicators and prevalence of children-reported diseases, with increased adjusted odd ratios (aORs) >1 for studied asthma, wheeze, allergic rhinitis, and eczema. The airborne fungal concentrations from air sampling were higher than 1000 CFU/m³ in summer, regardless of indoors and outdoors, indicating an intermediate pollution level. The DNA sequencing for dust showed the Aspergillus was the predominant at genus level and the Aspergillus_penicillioides was the most common at species level; while the fungal community and composition varied significantly in different homes and seasons, according to α and β diversity analyses. The comprehensive research methods contribute to a holistic understanding of indoor fungal exposure, including the concentrations, seasonal variations, community, and diversity, and verifies the relations with children's adverse health outcomes. The study further elucidates the role of microbiome in human health, which helps setting health-protective thresholds and managing mold treatments in buildings, to promote indoor air quality and human well-beings.

Environmental Factors Affecting Diversity, Structure, and Temporal Variation of Airborne Fungal Communities in a Research and Teaching Building of Tianjin University, China

Airborne fungi are widely distributed in the environment and may have adverse effects on human health. A 12-month survey on the diversity and concentration of culturable airborne fungi was carried out in a research and teaching building of Tianjin University. Indoor and outdoor environments were analyzed using an HAS-100B air sampler. A total of 667 fungal strains, belonging to 160 species and 73 genera were isolated and identified based on morphological and molecular analysis. The most abundant fungal genera were Alternaria (38.57%), Cladosporium (21.49%), and Aspergillus (5.34%), while the most frequently appearing species was A. alternata (21%), followed by A. tenuissima (12.4%), and C. cladosporioides (9.3%). The concentration of fungi in different environments ranged from 0 to 150 CFU/m3 and was significantly higher outdoor than indoor. Temperature and sampling month were significant factors influencing the whole building fungal community, while relative humidity and wind speed were highly correlated with fungal composition outdoor. Variations in the relative abundance of major airborne fungal taxa at different heights above-ground could lead to different community structures at different floors. Our results may provide valuable information for air quality monitoring and microbial pollution control in university building environments.

Contribution of Visible Surface Mold to Airborne Fungal Concentration as Assessed by Digital Image Quantification

The rapid monitoring of total fungi, including air and surface fungal profiling, is an important issue. Here, we applied air and surface sampling, combined with digital image quantification of surface mold spots, to evaluate the contribution of surface fungi to airborne fungal concentrations. Cladosporium, Penicillium, Aspergillus, and yeast often appeared in the air or on wall surfaces during sampling. The indoor/outdoor concentration ratios (I/O ratios) demonstrated that the airborne concentrations of commonly found fungal genera outdoors were higher than those indoors (median I/O ratio = 0.65-0.91), excluding those of Penicillium and yeast. Additionally, the surface density (fungal concentration/area) of individual fungi showed no significant correlation with the airborne concentration, excluding that of Geotrichum. However, if a higher surface ratio (>0.00031) of mold spots appeared in the total area of an indoor environment, then the concentrations of Aspergillus and Geotrichum in the air increased significantly. Our results demonstrated that the airborne concentration of indoor fungi is significantly correlated with the outdoor concentration. A higher density of surface fungi does not necessarily contribute to a high fungal concentration in the air. In contrast to fungal density, quantification of the surface fungal area is recommended to assess the risk of surface fungi propelling into the air.

Airborne fungi in Universiti Sains Malaysia: knowledge, density and diversity

Airborne fungi are among common contaminants in indoor and outdoor environments, leading to poor indoor air quality (IAQ), and to some extent, implicate health risks to humans worldwide. In Malaysia, fungal contamination in institutional buildings is rarely documented although these places are frequently visited by many. This study was conducted to assess the density and diversity of airborne fungi in Universiti Sains Malaysia (USM) main campus, Penang. A total of 11 sampling sites were assessed. Fungi were collected by using Andersen Single Stage Impact Air Sampler N-6 and MEA plates. Two separate trials, namely Trial 1 and Trial 2, were conducted in 2008 and 2019, respectively. The recovered fungi were identified up to the genus level-based morphological features. A survey involving 400 respondents among USM staff and students in relation to fungal contamination in indoor air environment was also conducted to evaluate the knowledge on indoor fungi among USM community. The densities of indoor air fungi in Trial 1 were higher; ranging from 81 to 1743 CFU/m³, exceeding the recommended level set by the Malaysia Industry Code of Practice (MCPIAQ) in some sampling sites, compared to that of in Trial 2 where the densities ranged from 229 to 699 CFU/m³. A total of 154 isolates and 230 isolates of airborne fungi were recovered in Trial 1 and Trial 2, respectively. In total, 11 fungal genera were identified in both trials, and three genera were predominant: Aspergillus, Penicillium, and Cladosporium. The survey also revealed that knowledge of IAQ among staff and students was limited and that they were unaware of fungal contamination and IAQ. A continuous and wide-spread awareness should be implemented at USM main campus for safer and healthier indoor air environments, particularly university students where productivity and efficiency are of the utmost importance.

Temporal variation of airborne fungi in university library rooms and its relation to environmental parameters and potential confounders

Indoor airborne fungi have been associated with adverse human health effects. Therefore, it is important to understand the causes of underlying variation in airborne fungi in indoor environments. This study consequently aimed to investigate the association between indoor fungi with temporal variation, environmental parameters, and potential confounders over 10 months in four library rooms using Andersen samplers. Indoor fungal concentrations peaked in October and were lowest in March in both stack rooms, whereas the highest concentrations in both reading rooms were observed in September with lowest concentrations in July. Nonparametric analyses revealed higher fungal concentrations in the rooms that were significantly associated with relative humidity ≥ 60%, PM_2.5 ≥ 35 μg/m³, number of people ≥ 16, open windows, working air conditioners, and room area < 400 m². Multiple linear regression modeling for the library building considering only continuous variables revealed that relative humidity, PM_2.5, and the number of people were significant predictors of fungal concentrations. Additionally, the model with continuous and categorical variables suggested that relative humidity, PM_2.5, the number of people, ceiling fan condition, window state, and air conditioner operating status were significant predictor variables of concentrations. Outdoor fungal concentrations were a significant predictor for the two models of indoor fungal concentrations for each room. Ceiling fan or air conditioner operation was associated with altered fungal particle concentrations. These results provide a deeper understanding of indoor air fungal quality.