Powdered activated carbon (PAC) amendment enhances naphthalene biodegradation under strictly sulfate-reducing conditions

Use of nitrate, sulphate, and iron (III) as electron acceptors to improve the anaerobic degradation of linear alkylbenzene sulfonate: effects on removal potential and microbiota diversification

Linear alkylbenzene sulfonate (LAS) is a synthetic anionic surfactant that is found in certain amounts in wastewaters and even in water bodies, despite its known biodegradability. This study aimed to assess the influence of nitrate, sulphate, and iron (III) on LAS anaerobic degradation and biomass microbial diversity. Batch reactors were inoculated with anaerobic biomass, nutrients, LAS (20 mg L-1), one of the three electron acceptors, and ethanol (40 mg L-1) as a co-substrate. The control treatments, with and without co-substrate, showed limited LAS biodegradation efficiencies of 10 ± 2% and 0%, respectively. However, when nitrate and iron (III) were present without co-substrate, biodegradation efficiencies of 53 ± 4% and 75 ± 3% were achieved, respectively, which were the highest levels observed. Clostridium spp. was prominent in all treatments, while Alkaliphilus spp. and Bacillus spp. thrived in the presence of iron, which had the most significant effect on LAS biodegradation. Those microorganisms were identified as crucial in affecting the LAS anaerobic degradation. The experiments revealed that the presence of electron acceptors fostered the development of a more specialised microbiota, especially those involved in the LAS biodegradation. A mutual interaction between the processes of degradation and adsorption was also shown.

Enhancing the Anaerobic Biodegradation of Petroleum Hydrocarbons in Soils with Electrically Conductive Materials

Anaerobic bioremediation is a relevant process in the management of sites contaminated by petroleum hydrocarbons. Recently, interspecies electron transfer processes mediated by conductive minerals or particles have been proposed as mechanisms through which microbial species within a community share reducing equivalents to drive the syntrophic degradation of organic substrates, including hydrocarbons. Here, a microcosm study was set up to investigate the effect of different electrically conductive materials (ECMs) in enhancing the anaerobic biodegradation of hydrocarbons in historically contaminated soil. The results of a comprehensive suite of chemical and microbiological analyses evidenced that supplementing the soil with (5% w/w) magnetite nanoparticles or biochar particles is an effective strategy to accelerate the removal of selected hydrocarbons. In particular, in microcosms supplemented with ECMs, the removal of total petroleum hydrocarbons was enhanced by up to 50% relative to unamended controls. However, chemical analyses suggested that only a partial bioconversion of contaminants occurred and that longer treatment times would have probably been required to drive the biodegradation process to completion. On the other hand, biomolecular analyses confirmed the presence of several microorganisms and functional genes likely involved in hydrocarbon degradation. Furthermore, the selective enrichment of known electroactive bacteria (i.e., Geobacter and Geothrix) in microcosms amended with ECMs, clearly pointed to a possible role of DIET (Diet Interspecies Electron Transfer) processes in the observed removal of contaminants.

Single and simultaneous effects of naphthalene and salinity on anaerobic digestion: Response surface methodology, microbial community analysis and potential functions prediction

Polycyclic aromatic hydrocarbons (PAHs) are a persistent and prevalent class of pollutants in petroleum-contaminated saline environment, which pose potential harm to organisms. Researches on anaerobic biodegradation of PAHs are gradually emerging, but the response of anaerobic microorganisms to salinity changes and the co-effects of salinity and PAHs in anaerobic digestion (AD) system have seldom been reported. Thus, we investigated the variations of AD system performance and anaerobic microbial community caused by different concentrations of naphthalene (Nap) or/and NaCl based on Box-Behnken Design (0 mg/L ≤ Nap ≤150 mg/L, 0 g/L ≤ NaCl ≤25 g/L). The promoted efficiencies of acidogenesis and methanogenesis were found in presence of moderate NaCl or Nap, but high salinity (NaCl >4.4 g/L) weakened AD performance. Moreover, the high salinity (NaCl >4.4 g/L) and Nap resulted in reduced microbial Ca²⁺ Mg²⁺- ATPase activity, poor EPS secretion and the highest difference of the microbial operational taxonomic units (OTUs), and synergistically inhibited AD process. Microbiological analysis revealed that the relative abundance of Clostridium and acetoclastic Methanosaeta was increased by 2.01 times and 2.17 times in single Nap treated group compared to control. With the simultaneous addition of NaCl and Nap, Proteiniphilum and hydrogenotrophic methanogens (Methanobacterium, Methanofollis, and Methanolinea) occupied the major abundance. Potential functions prediction indicated that high salinity could disrupt the co-metabolism between carbohydrate metabolism and Nap degradation. This study provides basis for anaerobic bioremediation of PAHs-polluted saline environment.

Anaerobic bacterial responses to carbonaceous materials and implications for contaminant transformation: Cellular, metabolic, and community level findings

Carbonaceous materials (CM) enhance the abundance and activity of bacteria capable of persistent organic (micro)pollutant (POP) degradation. This review synthesizes anaerobic bacterial responses to minimally modified CM in non-fuel cell bioremediation applications at three stages: attachment, metabolism, and biofilm genetic composition. Established relationships between biological behavior and CM surface properties are identified, but temporal relationships are not well understood, making it difficult to connect substratum properties and "pioneer" bacteria with mature microorganism-CM systems. Stark differences in laboratory methodology at each temporal stage results in observational, but not causative, linkages as system complexity increases. This review is the first to critically examine relationships between material and cellular properties with respect to time. The work highlights critical knowledge gaps that must be addressed to accurately predict microorganism-CM behavior and to tailor CM properties for optimized microbial activity, critical frontiers in establishing this approach as an effective bioremediation strategy.

A Review on the Removal of Carbamazepine from Aqueous Solution by Using Activated Carbon and Biochar

Carbamazepine (CBZ), one of the most used pharmaceuticals worldwide and a Contaminant of Emerging Concern, represents a potential risk for the environment and human health. Wastewater treatment plants (WWTPs) are a significant source of CBZ to the environment, polluting the whole water cycle. In this review, the CBZ presence and fate in the urban water cycle are addressed, with a focus on adsorption as a possible solution for its removal. Specifically, the scientific literature on CBZ removal by activated carbon and its possible substitute Biochar, is comprehensively scanned and summed up, in view of increasing the circularity in water treatments. CBZ adsorption onto activated carbon and biochar is analyzed considering several aspects, such as physicochemical characteristics of the adsorbents, operational conditions of the adsorption processes and adsorption kinetics and isotherms models. WWTPs usually show almost no removal of CBZ (even negative), whereas removal is witnessed in drinking water treatment plants through advanced treatments (even >90%). Among these, adsorption is considered one of the preferable methods, being economical and easier to operate. Adsorption capacity of CBZ is influenced by the characteristics of the adsorbent precursors, pyrolysis temperature and modification or activation processes. Among operational conditions, pH shows low influence on the process, as CBZ has no charge in most pH ranges. Differently, increasing temperature and rotational speed favor the adsorption of CBZ. The presence of other micro-contaminants and organic matter decreases the CBZ adsorption due to competition effects. These results, however, concern mainly laboratory-scale studies, hence, full-scale investigations are recommended to take into account the complexity of the real conditions.

Hydrodynamic cavitation activation of persulfate for the degradation of polycyclic aromatic hydrocarbons in marine sediments

Hydrodynamic cavitation (HC) coupled with persulfate (PS)-based that resulted in the synergistic degradation of polycyclic aromatic hydrocarbons (PAHs) in contaminated marine sediments. The effects of HC injection pressure and Σ[PAH]: [PS] on the rate and extent of PAH degradation were studied in the pressure range of 0.5-2.0 bar, PS concentration rage of 2 × 10^-4 to 2 × 10^-2 M or Σ[PAH]: [PS] of 1:10-1000, and reaction time of 20-60 min. A pseudo-first-order rate law fitted PAHs removal kinetics well. The degradation rate constant increased with injection pressure, reaching the maximum level at 0.5 bar, then decreased at injection pressure became greater than 0.5 bar. The results showed that PAH removal was 84% by the combined HC and PS process, whereas, HC alone only achieved a 43% removal of PAHs in marine sediments under the optimal inlet pressure of 0.5 bar at PS concentration of 2 × 10^-2 M in 60 min. The HC‒PS system effectively removed PH, PY, FLU, BaA, and CH at 91, 99, 91, 84, and 90%, respectively. The maximum removal of 6-, 5-, 4-, 3-, and 2-ring PAHs was 89, 87, 84, 76, and 34%, respectively. Major reactive oxygen species (ROSs), namely, SO₄^-• and HO•, were responsible for PAHs degradation. Results clearly highlighted the feasibility of HC-PS system for the clean-up of PAHs-laden sediments in particular and other recalcitrant organic contaminants in general.

Anaerobic-petroleum degrading bacteria: Diversity and biotechnological applications for improving coastal soil

Due to the industrial emissions and accidental spills, the critical material for modern industrial society petroleum pollution causes severe ecological damage. The prosperous oil exploitation and transportation causes the recalcitrant, hazardous, and carcinogenic sludge widespread in the coastal wetlands. The costly physicochemical-based remediation remains the secondary and inadequate treatment for the derivatives along with the tailings. Anaerobic microbial petroleum degrading biotechnology has received extensive attention for its cost acceptable, eco-friendly, and fewer health hazards. As a result of the advances in biotechnology and microbiology, the anaerobic oil-degrading bacteria have been well developing to achieve the same remediation effects with lower operating costs. This review summarizes the advantages and potential scenarios of the anaerobic degrading bacteria, such as sulfate-reducing bacteria, denitrifying bacteria, and metal-reducing bacteria in the coastal area decomposing the alkanes, alkenes, aromatic hydrocarbons, polycyclic aromatic, and related derivatives. In the future, a complete theoretical basis of microbiological biotechnology, molecular biology, and electrochemistry is necessary to make efficient and environmental-friendly use of anaerobic degradation bacteria to mineralize oil sludge organic wastes.