Metal resistance genes enrichment in marine biofilm communities selected by biocide-containing surfaces in temperate and tropical coastal environments

Comprehensive assessment of copper's effect on marine organisms under ocean acidification and warming in the 21st century

Copper (Cu) has sparked widespread global concern as one of the most hazardous metals to aquatic animals. Ocean acidification (OA) and warming (OW) are expected to alter copper's bioavailability based on pH and temperature-sensitive effects; research on their effects on copper on marine organisms is still in its infancy. Therefore, under representative concentration pathways (RCP) 2.6, 4.5, and 8.5, we used the multiple linear regression-water quality criteria (MLR-WQC) method to assess the effects of OA and OW on the ecological risk posed by copper in the Ocean of East China (OEC), which includes the Bohai Sea, Yellow Sea, and East China Sea. The results showed that there was a positive correlation between temperature and copper toxicity, while there was a negative correlation between pH and copper toxicity. The short-term water quality criteria (WQC) values were 1.53, 1.41, 1.30 and 1.13 μg·L-1, while the long-term WQC values were 0.58, 0.48, 0.40 and 0.29 μg·L-1 for 2020, 2099-RCP2.6, 2099-RCP4.5 and 2099-RCP8.5, respectively. Cu in the OEC poses a moderate ecological risk. Under the current copper exposure situation, strict intervention (RCP2.6) only increases the ecological risk of copper exposure by 20 %, and no intervention (RCP8.5) will increase the ecological risk of copper exposure by nearly double. The results indicate that intervention on carbon emissions can slow down the rate at which OA and OW worsen the damage copper poses to marine creatures. This study can provide valuable information for a comprehensive understanding of the combined impacts of climate change and copper on marine organisms.

Substrate Specificity of Biofilms Proximate to Historic Shipwrecks

The number of built structures on the seabed, such as shipwrecks, energy platforms, and pipelines, is increasing in coastal and offshore regions. These structures, typically composed of steel or wood, are substrates for microbial attachment and biofilm formation. The success of biofilm growth depends on substrate characteristics and local environmental conditions, though it is unclear which feature is dominant in shaping biofilm microbiomes. The goal of this study was to understand the substrate- and site-specific impacts of built structures on short-term biofilm composition and functional potential. Seafloor experiments were conducted wherein steel and wood surfaces were deployed for four months at distances extending up to 115 m away from three historic (>50 years old) shipwrecks in the Gulf of Mexico. DNA from biofilms on the steel and wood was extracted, and metagenomes were sequenced on an Illumina NextSeq. A bioinformatics analysis revealed that the taxonomic composition was significantly different between substrates and sites, with substrate being the primary determining factor. Regardless of site, the steel biofilms had a higher abundance of genes related to biofilm formation, and sulfur, iron, and nitrogen cycling, while the wood biofilms showed a higher abundance of manganese cycling and methanol oxidation genes. This study demonstrates how substrate composition shapes biofilm microbiomes and suggests that marine biofilms may contribute to nutrient cycling at depth. Analyzing the marine biofilm microbiome provides insight into the ecological impact of anthropogenic structures on the seabed.

Decoupled responses of the copepod Eurytemora affinis transcriptome and its microbiota to dissolved copper exposure

Chemical contamination is a common threat to biota thriving in estuarine and coastal ecosystems. Of particular importance is that trace metals tend to accumulate and exert deleterious effects on small invertebrates such as zooplankton, which are essential trophic links between phytoplankton and higher-level consumers in aquatic food webs. Beyond the direct effects of the contamination, we hypothesized that metal exposure could also affect the zooplankton microbiota, which in turn might further impair host fitness. To assess this assumption, copepods (Eurytemora affinis) were sampled in the oligo-mesohaline zone of the Seine estuary and exposed to dissolved copper (25 µg.L^-1) over a 72-hour time period. The copepod response to copper treatment was assessed by determining transcriptomic changes in E. affinis and the alteration of its microbiota. Unexpectedly, very few genes were differentially expressed in the copper-treated copepods compared to the controls for both male and female samples, while a clear dichotomy between sex was highlighted with 80% of the genes showing sex-biased expression. In contrast, copper increased the taxonomic diversity of the microbiota and resulted in substantial compositional changes at both the phyla and genus levels. Phylogenetic reconstruction of the microbiota further suggested that copper mitigated the phylogenetic relatedness of taxa at the basal tree structure of the phylogeny, whereas it strengthened it at the terminal branches. Increased terminal phylogenetic clustering in the copper-treated copepods coincided with higher proportions of bacterial genera previously identified as copper resistant (e.g., Pseudomonas, Acinetobacter, Alkanindiges, Colwellia) and a higher relative abundance of the copA_ox gene encoding a periplasmic inducible multi-copper oxidase. The enrichment in micro-organisms likely to perform copper sequestration and/or enzymatic transformation processes, underlines the need to consider the microbial component during evaluation of the vulnerability of zooplankton to metallic stress.

The characteristics and metabolic potentials of the soil bacterial community of two typical military demolition ranges in China

The response mechanism of soil microbiota in military polluted sites can effectively indicate the biotoxicity of ammunition. In this study, two military demolition ranges polluted soils of grenades and bullet were collected. According to high-throughput sequencing, after grenade explosion, the dominant bacteria in Site 1 (S1) are Proteobacteria (97.29 %) and Actinobacteria (1.05 %). The dominant bacterium in Site 2 (S2) is Proteobacteria (32.95 %), followed by Actinobacteria (31.17 %). After the military exercise, the soil bacterial diversity index declined significantly, and the bacterial communities interacted more closely. The indigenous bacteria in S1 were influenced more compared to those in S2. According to the environmental factor analysis, the bacteria composition can easily be influenced by heavy metals and organic pollutants, including Cu, Pb, Cr and Trinitrotoluene (TNT). About 269 metabolic pathways annotated in the Kyoto Encyclopedia of Genes and Genomes (KEGG) database were detected in bacterial communities, including nutrition metabolism (C, 4.09 %; N, 1.14 %; S, 0.82 %), external pollutant metabolism (2.52 %) and heavy metal detoxication (2.12 %), respectively. The explosion of ammunition changes the basic metabolism of indigenous bacteria, and heavy metal stress inhibits the TNT degradation ability of bacterial communities. The pollution degree and community structure influence the metal detoxication strategy at the contaminated sites together. Heavy metal ions in S1 are mainly discharged through membrane transporters, while heavy metal ions in S2 are mainly degraded through lipid metabolism and biosynthesis of secondary metabolites. The results obtained in this study can provide deep insight into the response mechanism of the soil bacterial community in military demolition ranges with composite pollutions of heavy metals and organic substances. CAPSULE: Heavy metal stress changed the composition, interaction and metabolism of indigenous communities in military demolition ranges, especially the TNT degradation process.

Influence of Sharklet-Inspired Micropatterned Polymers on Spatio-Temporal Variations of Marine Biofouling

This article aims to show the influence of surface characteristics (microtopography, chemistry, mechanical properties) and seawater parameters on the settlement of marine micro- and macroorganisms. Polymers with nine microtopographies, three distinct mechanical properties, and wetting characteristics are immersed for one month into two contrasting coastal sites (Toulon and Kristineberg Center) and seasons (Winter and Summer). Influence of microtopography and chemistry on wetting is assessed through static contact angle and captive air bubble measurements over 3-weeks immersion in artificial seawater. Microscopic analysis, quantitative flow cytometry, metabarcoding based on the ribulose biphosphate carboxylase (rbcL) gene amplification, and sequencing are performed to characterize the settled microorganisms. Quantification of macrofoulers is done by evaluating the surface coverage and the type of organism. It is found that for long static in situ immersion, mechanical properties and non-evolutive wettability have no major influence on both abundance and diversity of biofouling assemblages, regardless of the type of organisms. The apparent contradiction with previous results, based on model organisms, may be due to the huge diversity of marine environments, both in terms of taxa and their size. Evolutive wetting properties with wetting switching back and forth over time have shown to strongly reduce the colonization by macrofoulers.

Molecular dissemination of emerging antibiotic, biocide, and metal co-resistomes in the Himalayan hot springs

Growing resistance among microbial communities against antimicrobial compounds, especially antibiotics, is a significant threat to living beings. With increasing antibiotic resistance in human pathogens, it is necessary to examine the habitats having community interests. In the present study, a metagenomic approach has been employed to understand the causes, dissemination, and effects of antibiotic, metal, and biocide resistomes on the microbial ecology of three hot springs, Borong, Lingdem, and Yumthang, located at different altitudes of the Sikkim Himalaya. The taxonomic assessment of these hot springs depicted the predominance of mesophilic organisms, mainly belonging to the phylum Proteobacteria. The enriched microbial metabolism assosiated with energy, cellular processes, adaptation to diverse environments, and defence were deciphered in the metagenomes. The genes representing resistance to semisynthetic antibiotics, e.g., aminoglycosides, fluoroquinolones, fosfomycin, vancomycin, trimethoprim, tetracycline, streptomycin, beta-lactams, multidrug resistance, and biocides such as triclosan, hydrogen peroxide, acriflavin, were abundantly present. Various genes attributing resistance to copper, arsenic, iron, and mercury in metal resistome were detected. Relative abundance, correlation, and genome mapping of metagenome-assembled genomes indicated the co-evolution of antibiotic and metal resistance in predicted novel species belonging to Vogesella, Thiobacillus, and Tepidimona genera. The metagenomic findings were further validated with isolation of microbial cultures, exhibiting resistance against antibiotics and heavy metals, from the hot spring water samples. The study furthers our understanding about the molecular basis of co-resistomes in the ceological niches and their possible impact on the environment.

Seawater copper content controls biofilm bioaccumulation and microbial community on microplastics

The adsorption of trace metals on microplastics (MPs) is affected by the presence of surficial biofilms but their interactions are poorly understood. Here, we present the influence of Cu levels in real seawater (Toulon Bay, NW Mediterranean Sea) on microbial communities and Cu content of the resulting biofilms grown during incubation experiments on high density polyethylene. Two sets of incubation experiments were run with seawater supplied with MPs, sampled in two sites with contrasting Cu levels: Pt12 (most contaminated site) and Pt41P (less contaminated site). For each incubation experiment, 5 treatments were considered differing in Cu concentrations, ranging between 30 and 400 nM and between 6 and 60 nM, for Pt12 and Pt41p, respectively. A control experiment (filtered at 0.2 μm) was run in parallel for each incubation experiment. We observed that, at the time scale of the incubation period, both prokaryotic and eukaryotic richness and diversity were higher in the biofilms formed from the most contaminated site. In addition, we showed that Cu levels are shaping biofilm communities, evidencing co-occurrence patterns between prokaryotes and eukaryotes with diatoms playing a central role. These differences in biofilm formation were reflected in the amount of bioaccumulated Cu per dry weight of MPs, exhibiting higher values in the most contaminated site. Within this site, the increase of Cu seawater content enhanced its bioaccumulation onto MPs until reaching saturation. This study strongly suggests a striking link between seawater copper content, biofilm community shaping and the resulting Cu bioaccumulation onto MPs.

Temperate and tropical coastal waters share relatively similar microbial biofilm communities while free-living or particle-attached communities are distinct

Free-living (FL) marine microbial communities differ from those attached to particles (PA). Likewise, biofilms (B) colonizing artificial surfaces, including plastics or ship hulls, hardly resemble their planktonic surroundings. However, few studies have examined the effect of the environment on these lifestyles and on the source of organisms colonizing marine surfaces. Using 16S rRNA gene metabarcoding, we identified specificities of marine prokaryotic community lifestyles (FL, PA or B) sampled in three coastal polluted locations with dissimilar environmental conditions: the North-Western Mediterranean Sea and the Atlantic and Indian Oceans. Biofilms developed over polyvinyl chloride (PVC) were found to be significantly different from FL or PA collected during the immersions. Alpha-diversity increased from FL to PA and to B, illustrating the integrative aspect of the latter, with little proportion of operational taxonomic units shared with the first two. Beta-diversity clustered first the lifestyles and then the sites. FL and PA were more affected by water quality, especially by trace metal contamination, whereas B were as sensitive to trace metals as to nutrients. Although biofilms should be supplied by the planktonic (ultra) rare biosphere, source tracking could only detect small contributions of FL or PA taxa to B communities.

Ways to improve biocides for metalworking fluid

Metalworking fluids (MWF) are mainly emulsions of oil in water containing additives such as corrosion inhibitors, emulsifiers, defoamers, and biocides. Microbial contamination of MWF is almost systematic, and some of their constituents serve as nutrients for contaminating microorganisms. Biocides for MWF are protection products used to counter microbial contaminations and growth. Ideally, a biocide for MWF should have the following non-exhaustive criteria: have a broad-spectrum activity, be usable at low concentrations, be compatible with the formulation and the physical-chemical properties of MWF, be stable over time, retain its effectiveness in the presence of soiling, have no corrosive action on metals, present no danger to humans and the environment, be inexpensive. The future lies in the development of new molecules with biocidal activity corresponding to these ideal specifications, but in the meantime, it is possible to improve the performance of existing molecules currently on the market. Different strategies for potentiation of the activity of existing biocides are possible. The compatibility of the potentiation strategies with their use in metal working fluids is discussed.