Design of a dual responsive receptor with oxochromane hydrazide moiety to monitor toxic Hg2+ and Cd2+ ions: Usage on real samples and live cells

A novel one-stepped synthesized Schiff-base fluorescence probe for specific recognition of zinc ions with highly sensitive and its application in living cells

Fluorescent turn-on receptors are extensively employed for the detection of Zn ions contamination in the environment due to its simplicity, convenience and portability. However, developing highly sensitive and cell-imageable fluorescent turn-on probe for the recognition of Zn ions in living organisms remains a significant challenge. Herein, we have successfully synthesized a novel Schiff base probe (H2L) with a significant fluorescence turn-on response (Zn ions) by one-step synthetic method. In this work, H2L exhibited high sensitivity to Zn2+ ions upon interaction with various common metal ions in HEPES buffer solution. Its detection limit is 1.87 × 10-7 M, which is lower than the requirement of Environmental Protection Agency (EPA) and World Health Organization (WHO) guidelines. The fluorescence titration and Job's plot analysis suggested a 1:1 binding ratio between the probe and Zn ion, and the single-crystal structures obtained further confirmed this inference. In addition, the fluorescent sensor demonstrated recyclability, maintaining its fluorescence intensity for up to 6 cycles without significant decrease, which holds promise for future investigations on reversible fluorescent chemosensors. Notably, fluorescence imaging experiments demonstrated that H2L could be successfully used for the detection of Zn2+ in live cells.

Novel coumarin-based ratiometric bifunctional fluorescent probe mimicking a set-reset memorized device

A novel coumarin-based fluorescent sensor CHE, incorporating 2-hydrazinylbenzothiazole and coumarin aldehyde, has been developed that demonstrated a preferential detection of Hg2+ and Ag+ in presence of interferences. Compared to previously prevalent intensity-based fluorescent probes, CHE exhibited a ratiometric fluorescence response to Hg2+ and Ag+, and further accurately differentiated Hg2+ and Ag + using the differential extractive ability of EDTA when interacting with ion-CHE complexes. Sensing mechanism was investigated and elucidated. The chemosensor CHE was successfully applied to detect Hg2+ and Ag+ in six distinct samples with satisfactory results. Additionally, combinatorial logic circuits were constructed utilizing three distinct logic gates (NOT, OR, and INH) based on the sensor's differential output signals in response to Hg2+/Ag+ and other cations. Interestingly, utilizing the reversible and reproducible switching behavior of the EDTA interaction with Hg2+, a conceptual 'Write-Read-Erase-Read' memory function with multi-write capability was proposed, offering a novel perspective for molecular-based memory systems.

2D MXene-Based Nanoscale Materials for Electrochemical Sensing Toward the Detection of Hazardous Pollutants: A Perspective

MXenes (Mn+1XnTx), a subgroup of 2-dimensional (2D) materials, specifically comprise transition metal carbides, nitrides, and carbonitrides. They exhibit exceptional electrocatalytic and photocatalytic properties, making them well-suited for the detection and removal of pollutants from aqueous environments. Because of their high surface area and remarkable properties, they are being utilized in various applications, including catalysis, sensing, and adsorption, to combat pollution and mitigate its adverse effects. Different characterization techniques like XRD, SEM, TEM, UV-Visible spectroscopy, and Raman spectroscopy have been used for the structural elucidation of 2D MXene. Current responses against applied potential were measured during the electrochemical sensing of the hazardous pollutants in an aqueous system using a variety of electroanalytical techniques, including differential pulse voltammetry, amperometry, square wave anodic stripping voltammetry, etc. In this review, a comprehensive discussion on structural patterns, synthesis, properties of MXene and their application for electrochemical detection of lethal pollutants like hydroquionone, phenol, catechol, mercury and lead, etc. are presented. This review will be helpful to critically understand the methods of synthesis and application of MXenes for the removal of environmental pollutants.

A novel "turn-on" fluorescent probe based on thiocarbamoyl-DHP for Hg2+ detection in water samples and living cells

In this study, two fluorescent sensing probes, dihydropyridine (DHP) derivatives (DHP-CT1 and DHP-CT2) bearing phenoxy thiocarbonyl group, have been developed for Hg2+ detection. The tandem trimerization-cyclization of methylpropiolate with ammonium acetate gave 1.4-DHP and 1,2-DHP derivatives, which were reacted with O-phenylcarbonochloridothioate to produce DHP-CT1 and DHP-CT2, respectively. DHP-CT1 exhibits superior sensitivity and selectivity of fluorescence enhancement towards Hg2+ in aqueous media. The fluorescence intensity shows a good linear relationship with the concentration of Hg2+ in the range of 0-10 µM providing the extremely low LOD of 346 nM (69.4 ppb). The fluorescence enhancement is caused by the Hg2+ promoted hydrolysis of the thioamide bond releasing the fluorescent 1,4-DHP that was confirmed by NMR and HRMS. The quantitative analysis of Hg2+ in water samples using DHP-CT1 probe was demonstrated in aqueous solution and paper-based sensing strips. Furthermore, DHP-CT1 was also applied for monitoring intracellular Hg2+ in living RAW264.7 macrophages through fluorescence cell imaging.

A Simple Selective Probe for Lysine Detection in Tablets, Food Samples and Cells

A novel probe ITQ (9-(((E)-1 H-inden-1-ylidene)methyl)-8-(3-(((E)-1 H-inden-1-ylidene)methyl)phenoxy)-2,3,6,7-tetrahydro-1 H,5 H-pyrido[3,2,1ij]quinolone) was successfully designed and synthesized to detect amino acid lysine (Lys). The selective sensing behavior of the probe ITQ was observed using absorption and emission spectral results. Further, the probe ITQ exhibits a strong binding affinity for Lys [1.4 × 104 M- 1] and detects and quantifies Lys even in its nanomolar concentration. Moreover, the probe ITQ detects Lys at 1:2 binding stoichiometry with suitable biological pH [4-11]. Furthermore, the probe ITQ was also successfully utilized to detect Lys in tablets, real samples (avocado, soyabean and pork) and in live HeLa cells.

A new nitrile vinyl linked ultrafast receptor to track cyanide ions: Utilization on realistic samples and HeLa cell imaging

A simple D - A (donor - acceptor) type receptor ((2E, 2'E)-3, 3'-(10-octyl-10H-phenothiazine-3,7-diyl)bis(2-(benzo[d]thiazol-2-yl)acrylonitrile)) (PBTA) containing nitrile-vinyl linkage was designed and completely characterized. The receptor PBTA detects CN^- ions based on "turn-off" effect with admirable spectral properties. It also owns some of the merits like "naked-eye" color change, ultrafast response (90 s), lowest detection limit (1.25 × 10^-10 M) as well as quantitation limit (4.17 × 10^-10 M) with the pH range 4-11 which is more suitable pH to make use of the receptor PBTA in physiological medium. The instant detecting ability of the receptor over CN^- ions was proved using paper test strip and cotton balls. Further, the utilization of the receptor PBTA was also extended to track CN^- ions in realistic samples (water and food samples) and in HeLa cells bioimaging.

An aqueous mediated ultrasensitive facile probe incorporated with acrylate moiety to monitor cysteine in food samples and live cells

A colorimetric probe TQA ((E)-4-(((8-(sec-butoxy)-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-9-yl)methylene)amino)benzylacrylate) possessing greater potent towards the sensing of cysteine was successfully synthesized and characterized. The aqueous soluble probe TQA detects Cys based on "ON-OFF" effect with excellent absorbance and emission properties. The probe TQA detects Cys up to its ultra-low level concentration of 1.5 nM and also quantifies the Cys up to 5.05 nM with the quicker response time of 140 s (2.3 min). In addition, the color change produced by the probe TQA on integrated with Cys was also identified easily via paper strip, cotton wool buds and RGB color picker app in smart mobiles. Further, the admirable selectivity and sensitivity of the probe TQA towards Cys extends its utility towards food samples and imaging of live HeLa cells.

Lighting up trace carbon monoxide and residual palladium species by a low cytotoxic mitochondria targetable red fluorescent probe: Its large scaled applications

High levels of residual palladium can lead to serious negative health effects. Carbon monoxide (CO) is a significant gasotransmitter in transporting intermolecular and intramolecular signals to balance several physiological processes. Therefore, there is a need for rapid detection of CO and palladium residue. To address these issues, we have designed a novel light-up fluorescent probe for the detection of Pd and CO. It can not only detect Pd and CO selectively with a remarkable chromogenic and red fluorescent response over other metal ions allowing detection with naked eyes but also discriminate Pd⁰ and Pd²⁺/Pd⁴⁺ species. The detection reaction is confirmed by HPLC analysis. The probe demonstrates biocompatibility and mitochondrial target ability for potential biological applications. The practical applications based on drug residue and soil analysis, and smartphone have been successfully performed. Bioimaging of the concentration change of Pd and CO in HeLa cells using the probe is successfully applied. Therefore, the present approach can provide early diagnosis of Pd and CO with low detection limit, low cytotoxicity, high selectivity, and sensitivity.

Simple Fluorescence Sensing Approach for Selective Detection of Fe3+ Ions: Live-Cell Imaging and Logic Gate Functioning

A pyrene-based fluorescent chemosensor APSB [N-(pyrene-1-ylmethylene) anthracen-2-amine] was designed and developed by a simple condensation reaction between pyrene carboxaldehyde and 2-aminoanthracene. The APSB fluorescent sensor selectively binds Fe³⁺ in the presence of other metal ions. Apart from this, APSB shows high selectivity and sensitivity toward Fe³⁺ ion detection. The detection limit for APSB was 1.95 nM, and the binding constant (K _b) was obtained as 8.20 × 10⁵ M^-1 in DMSO/water (95/5, v/v) medium. The fluorescence quantum yields for APSB and APSB-Fe³⁺ were calculated as 0.035 and 0.573, respectively. The function of this fluorescent sensor APSB can be explained through the photo-induced electron transfer mechanism which was further proved by density functional theory studies. Finally, a live-cell image study of APSB in HeLa cells was also carried out to investigate the cell permeability of APSB and its efficiency for selective detection of Fe³⁺ in living cells.