Development of ultra-high surface area polyaniline-based activated carbon for the removal of volatile organic compounds from industrial effluents

Sulfur Fluoride Exchange Enabled Polysufate Adsorbents: Flexible Group Embedded in Polymer Backbone Regulation Strategy for Organic Solvent Removal from Water

Removal of organic solvents (such as chloroform, toluene, etc.) in trace amounts using adsorbents from water is a challenge due to their low removal efficiencies and poor selectivities. Herein, four polysulfates (P1-P4) with different flexible group embedded backbones were synthesized via a sulfur fluoride exchange (SuFEx) reaction, and their swelling behaviors in organic solvents were investigated. P1 with a flexible ethyl group on its backbone can selectively swell in aprotic organic solvents with medium and high polarities about 30-fold its original weight, which is much higher than that of P4 with rigid benzene on its backbone. Moreover, molecular dynamic (MD) simulation results showed that the swelling mechanism could be put down to the electrostatic and van der Waals forces between the polysulfates and organic solvents. Surprisingly, the polysulfates can be used to remove chloroform and toluene from water with removal efficiencies of up to 99.26 and 99.42%, respectively. Furthermore, the polysulfates also exhibited high selectivities and anti-interference performances toward chloroform in the presence of other pollutants and different acid/base environments. Our work provides a strategy to construct adsorbents with high efficiencies for removal of low concentrations of organic solvents from water.

Carbon based nanocomposites, surface functionalization as a promising material for VOCs (volatile organic compounds) treatment

Urban residential and industrial growth development affects sustainable and healthful indoor environments. Environmental issues are a global problem. The deterioration of indoor air quality has prompted the creation of several air cleansing techniques. This review explains how carbon-based materials have influenced the development of air purification systems using photocatalysis. These carbon-based materials offer unique properties and advantages in VOC removal processes. Biochar, produced from biomass pyrolysis, provides an environmentally sustainable solution with its porous structure and carbon-rich composition. Carbon quantum dots, with their quantum confinement effects and tunable surface properties, show promise in VOC sensing and removal applications. Polymers incorporating reduced graphene oxide demonstrate enhanced adsorption capabilities owing to the synergistic effects of graphene and polymer matrices. Activated carbon fibers, characterized by their high aspect ratio and interconnected porosity, provide efficient VOC removal with rapid kinetics. With their unique electronic and structural properties, graphitic carbon nitrides offer opportunities for photocatalytic degradation of VOCs under visible light. Catalysts integrated with MXene, a two-dimensional nanomaterial, exhibit enhanced catalytic activity for VOC oxidation reactions. Using various carbon-based materials in VOC removal showcases the versatility and effectiveness of carbon-based approaches in addressing environmental challenges associated with indoor air pollution. Metal-organic-framework materials are carbon-based compounds. It examines the correlation between VOC mineralization and specific characteristics of carbon materials, including surface area, adsorption capability, surface functional groups, and optoelectronic properties. Discussions include the basics of PCO, variables influencing how well catalysts degrade, and degradation mechanisms. It explores how technology will improve in the future to advance studies on healthy and sustainable indoor air quality.

Composite of a Stabilizer-Free Trimetallic Prussian Blue Analogue (PBA) and Polyaniline (PANI) on 3D Porous Nickel Foam for the Detection of Nitrofurantoin in Biological Fluids

Herein, a facile and highly effective nonenzymatic electrochemical sensing system is designed for the detection of the antibacterial drug nitrofurantoin (NFT). This electrocatalyst is a combination of a trimetallic Prussian blue analogue and conductive polyaniline coated onto a three-dimensional porous nickel foam substrate. A comprehensive set of physicochemical analyses have verified the successful synthesis. The fabricated electrochemical sensor exhibits an impressively low limit of detection (0.096 nM) and quantification (0.338 nM, S/N = 3.3), coupled with a wide linear range spanning from 0.1 nM to 5 mM and a sensitivity of 13.9 μA nM-1 cm-2. This excellent performance is attributed to the collaborative effects of conducting properties of polyaniline (PANI) and the remarkable redox behavior of the Prussian blue analogue (PBA). When both are integrated into the nickel foam, they create a significantly enlarged surface area with numerous catalytic active sites, enhancing the sensor's efficiency. The sensor demonstrates a high degree of specificity for NFT, while effectively minimizing responses to potential interferences such as flutamide, ascorbic acid, glucose, dopamine, uric acid, and nitrophenol, even when present in 2-3-fold higher concentrations. Moreover, to validate its practical utility, the sensor underwent real sample analysis using synthetic urine, achieving outstanding recovery rates of 118 and 101%.

Preparation of CPVC-based activated carbon spheres and insight into the adsorption-desorption performance for typical volatile organic compounds

Chlorinated polyvinyl chloride (CPVC)-based activated carbon spheres with smooth surfaces, good sphericity, interconnected hierarchical porous structure and high porosity have been synthesized by non-solvent induced phase separation method, followed by successive treatments of stabilization, carbonization at 450 °C in N2 atmosphere, and activation with CO2 as an agent at 900-1000 °C. The effect of activation temperatures on the textural properties of activated carbon spheres and their adsorption potential for volatile organic compounds (VOCs) under dynamic conditions is investigated. CO2 activation improves the hierarchy in the microporous range by stimulating the formation of supermicropores and significantly expands the specific surface area and pore volume of activated carbon spheres. The textural properties of adsorbents play a vital role in the adsorption performance of different VOCs. The adsorption capacity of VOC molecules can be greatly promoted by elevating specific surface area and pore volume. Due to the compatibility difference between the VOC molecules and the pore structure of adsorbents, the adsorption capacity follows the order of toluene > m-xylene > n-hexane. The adsorption isotherm of toluene on CPVC-AC1000 can be generally expressed by the Langmuir model. The adsorbents with larger average pore diameters possess a lower activation energy of desorption, which is beneficial for desorption. The carbon sphere activated at 1000 °C is a high-performance adsorbent with good reusability. Thus, the present study provides a synthesis process to produce the activated carbon spheres with high porosity from low-cost CPVC for its application in VOC adsorption.