Aspergillus spp. prevalence in Primary Health Care Centres: Assessment by a novel multi-approach sampling protocol

Comparative analysis of sampling and detection methods for fungal contamination on common healthcare environment surface materials

We evaluated sampling and detection methods for fungal contamination on healthcare surface materials, comparing the efficacy of foam sponges, flocked swabs, and Replicate Organism Detection And Counting (RODAC) plates alongside culture-based quantification and quantitative polymerase chain reaction (qPCR). Findings indicate that sponge sampling and qPCR detection performed best, suggesting a foundation for future studies aiming to surveillance practices for fungi.

Exploring airborne fungal contaminations and air quality pollution in nine ancient stone temples, Surin, Thailand

This study provided crucial insights into the concentrations of airborne fungi, environmental parameters, and atmospheric pollution in Thailand's ancient stone temples. Airborne fungi were identified based on morphological characteristics. Airborne fungi, meteorological parameters, and atmospheric pollutants concurrently assessed during each sampling event, evaluating indoor/outdoor ratio. Prevalent genera included Penicillium (14.36%), Aspergillus (10.94%), Cladosporium (10.74%), Rhizopus (6.31%), and Fusarium (5.90%), with an average fungi concentration of 4884.46 ± 724.79 CFU/m3. Eighteen fungal species out of the 64 airborne fungi identified were well-known serious pathogenic agents, contributing not only to structural deterioration but also to human health. Significant variations were observed between indoor and outdoor environments and across diverse landscapes, particularly for PM10 (ranging from 43.47 to 121.31 µg/m3) and PM2.5 (ranging from 29.59 to 89.60 µg/m3), with intensive incense burning identified as a prominent source of indoor atmospheric pollution. Historical temples, particularly situated in urban areas, were identified as significant reservoirs of airborne fungi. Correlations between meteorological parameters and pollutants revealed strong associations. Furthermore, principal component analysis (PCA) and cluster analysis elucidated distinct patterns in airborne fungal concentrations and contaminations. This study analyzed environmental factors, pollutants, airborne fungi, and geographical variations from July 2020 to March 2021. Understanding prevalent genera, airborne fungi concentrations, pathogenic species, biodeterioration, and environmental dynamics provided strategies for improving indoor air quality and mitigating airborne fungal contamination in archaeological buildings worldwide.

What's New in Prevention of Invasive Fungal Diseases during Hospital Construction and Renovation Work: An Overview

The goal of the overview was to give insight into the recent data of invasive fungal diseases (IFDs) associated with construction and renovation in healthcare settings as well as the recent evidence about available prevention and infection control measures. The number of studies describing IFD outbreaks associated with construction or renovation is on the rise again. Applying adequate prevention measures is still a challenge not just for healthcare workers but also for architects and construction workers as well. The role of multidisciplinary teams in the planning and monitoring of prevention measures cannot be overemphasized. Dust control is an inevitable part of every prevention plan. HEPA filters are helpful in the prevention of fungal outbreaks in hematologic patients, but further studies are needed to clarify the extent in which they contribute as specific control measures. The cut-off value for a "threating" level of fungal spore contamination still remains to be defined. The value of antifungal prophylaxis is difficult to assess because other preventive measures are simultaneously applied. Recommendations are still based on few meta-analyses, a large number of descriptive reports, and the opinion of respective authorities. Outbreak reports in the literature are a valuable resource and should be used for education as well as for preparing outbreak investigations.

Microbial contamination in waste collection: Unveiling this Portuguese occupational exposure scenario

Previous studies anticipated that microorganisms and their metabolites in waste will increase as a consequence of a decreased collection frequency and due to differences in what kind of waste is bagged before collection leading to an increased exposure of workers handling the waste. This study aim was to investigate the microbial contamination present in the waste collection trucks (WCT) and in the support facilities (waste collection station - WCS). It was applied a multi-approach protocol using active (air sampling by impingement and impaction) and passive (surface swabs, electrostatic dust cloths and settled dust) sampling methods. The screening of azole-resistance, the investigation of mycotoxins and the assessment of the elicited biological responses in vitro were also carried out aiming recognizing the possible health effects of waste collection drivers. SARS-CoV-2 detection was also performed. In WCS only air samples had contamination in all the four sampling sites (canteen, operational removal core, operational removal center, and administrative service). Among all the analyzed matrices from the WCT a higher percentage of total bacterial counts and Gram-was detected in swabs (66.93%; 99.36%). In WCS the most common species were Penicillium sp. (43.98%) and Cladosporium sp. (24.68%), while on WCT Aspergillus sp. (4.18%) was also one of the most found. In the azole resistance screening Aspergillus genera was not observed in the azole-supplemented media. SARS-CoV-2 was not detected in any of the environmental samples collected, but Aspergillus section Fumigati was detected in 5 samples. Mycotoxins were not detected in EDC from WCS, while in WCT they were detected in filters (N = 1) and in settled dust samples (N = 16). In conclusion, our study reveals that a comprehensive sampling approach using active and passive sampling (e.g. settled dust sampling for a representative mycotoxin evaluation) and combined analytic methods (i.e., culture-based and molecular) is an important asset in microbial exposure assessments. Concerning the waste collection exposure scenario, the results of this study unveiled a complex exposure, particularly to fungi and their metabolites. Aspergillus section Fumigati highlight the significance of targeting this section in the waste management industry as an indicator of occupational health risk.

Electrostatic Dust Cloth: A Useful Passive Sampling Method When Assessing Exposure to Fungi Demonstrated in Studies Developed in Portugal (2018–2021)

Electrostatic dust cloths (EDC) have been widely used for microbiologic contamination assessment in different indoor and occupational environments. This paper reviews sixteen studies performed in Portugal between 2018 and 2021 for evaluating the exposure to microbiological agents and focusing on fungi using EDC as a passive sampling method. The findings suggest that EDC can be applied as a screening method for particulate matter-exposure assessment and as a complementary method to characterize microbial exposures in occupational environments. Overall, EDC should be included, side by side with other sampling methods, in sampling campaigns focused on exposure assessments due to the advantages such as the straightforward extraction protocol favoring the employment of different assays, which allows us to assess exposure to a wide range of microbial agents, and presents higher accuracy regarding the fungal diversity.

Cytotoxicity of Aspergillus Section Fumigati Isolated from Health Care Environments

This study analyzed 57 Aspergillus section Fumigati (AF) isolates collected by active and passive sampling (N = 450) in several health care facilities and from biological sampling of health care workers (N = 25) and controls (N = 22) in Portugal. All isolates were cultured in different media and screened for azole resistance. Cytotoxicity was assessed for 40 isolates in lung epithelial cells and kidney cells using the MTT assay. Aspergillus section Fumigati was prevalent in the health care facilities and in nasal swabs from health care workers and controls. All AF isolates reduced cell viability and presented medium to high cytotoxicity, with cytotoxicity being significantly higher in A549 lung epithelial cells. The cytotoxicity of isolates from air and nasal swab samples suggested the inhalation route as a risk factor. Notably, 42% of AF isolates exhibited a pattern of reduced susceptibility to some of the most used antifungals available for the treatment of patients infected with these fungi. In sum, the epidemiology and clinical relevance of Aspergillus section Fumigati should continue to be addressed. A deeper understanding of the mechanisms underlying Aspergillus-mediated cytotoxicity is necessary.

Aspergillus Section Fumigati in Firefighter Headquarters

Background: Aspergillus section Fumigati is one of the Aspergillus sections more frequently related to respiratory symptoms and by other health outcomes. This study aimed to characterize Aspergillus section Fumigati distribution in eleven firefighter headquarters (FFHs) to obtain an accurate occupational exposure assessment. Methods: A sampling approach protocol was performed using active (impaction method) and passive sampling methods (floor surfaces swabs, electrostatic dust collectors (EDCs), and settled dust). All samples were analysed by culture-based methods and passive sampling was used for molecular detection of Aspergillus section Fumigati. Results: Of all the matrices, the highest counts of Aspergillus sp. were obtained on settled dust filters (3.37% malt extract agar—MEA, 19.09% dichloran glycerol—DG18) followed by cleaning cloths (1.67% MEA; 7.07% DG18). Among the Aspergillus genus, the Fumigati section was predominant in Millipore and EDC samples in MEA (79.77% and 28.57%, respectively), and in swabs and settled dust filters in DG18 (44.76% and 30%, respectively). The Fumigati section was detected more frequently in DG18 (33.01%) compared to MEA (0.33%). The Fumigati section was observed in azole supplemented media (itraconazole and voriconazole) in several passive sampling methods employed and detected by qPCR in almost all passive samples, with EDCs being the matrix with the highest prevalence (n = 61; 67.8%). Conclusion: This study confirms that Aspergillus sp. is widespread and the Fumigati section is present in all FFHs. The presence of fungi potentially resistant to azoles in the FFHs was also observed. Further studies are needed to identify the best corrective and preventive measures to avoid this section contamination in this specific occupational environment.

Risks associated with pathogenic fungi isolated from surgical centers, intensive care units, and materials sterilization center in hospitals. Risks associated with pathogenic fungi isolated from critical hospital areas

The hospital environment requires special attention to air quality, since it needs to be healthy for the protection of patients and health professionals in order to prevent them against hospital infections. The objective of this study was to isolate, identify and evaluate the susceptibility profile of isolated fungi from two hospitals. For air sampling the impaction (Spin Air, IUL®) and passive sedimentation methods were used. For the isolation of fungi from surfaces, contact plates (RODAC®) were used. The identification of the fungi was performed by observing the macroscopic and microscopic aspects of the colonies, whereas for better visualization of fruiting structures, the microculture technique was performed on slides. To evaluate the susceptibility profile, the broth microdilution test recommended by CLSI was performed. Thirty-five isolates were identified: Aspergillus flavus (12), Aspergillus fumigatus (11), Aspergillus niger (1), Aspergillus terreus (2), Penicillium spp. (7), and Fusarium spp. (2) in the hospitals evaluated. All isolates had a minimum inhibitory concentration (MIC) more than 128 μg/ml for fluconazole; 0.5 to 4.0 μg/ml for amphotericin B (hospital 1), and all isolates from haospital 2 had MIC ≥2.0 μg/ml. In hospital 1, MIC for posaconazole ranged from 0.25 μg/ml to ≥32 μg/ml, and hospital 2 ranged from 0.5 to 1.0 μg/ml. The monitoring and evaluation of air quality and surfaces are essential measures for prevention and control of hospital infections, as these microorganisms are becoming increasingly resistant to antimicrobial agents, thus making treatment difficult, especially in immunocompromised individuals.

Occupational exposure to Aspergillus section Fumigati: Tackling the knowledge gap in Portugal

Aspergillus section Fumigati is one of the sections of the Aspergillus genus most often associated with respiratory symptoms. The azole-resistant clinical isolates in this section have been widely described worldwide. More recently, the environmental origin of azole resistance has been correlated with the development of fungal diseases and therapeutic failure. This paper presents a review of several studies performed in Portuguese occupational environments focusing on occupational exposure to this section and give guidance to exposure assessors and industrial hygienists to ensure an accurate exposure assessment. Future studies should tackle the limitations concerning the assessment of occupational exposure to the Fumigati section, in order to allow the implementation of adequate risk management measures. In the light of the results of previous studies, the following approach is proposed to ensure an accurate exposure assessment: a) a combination of active and passive sampling methods appropriate to each occupational environment; b) the use, in parallel, of culture-based methods and molecular tools to overcome the limitations of each method; c) evaluation of the mycobiota azole resistance profile; and d) consider the possible simultaneous presence of mycotoxins produced by this section when assessing workers occupational exposure. In sum, preventing the development of fungal strains resistant to azoles will only be achieved with a holistic approach. An adequate "One Health approach" can contribute positively to concerted actions in different sectors, by reducing the use of fungicides through the introduction of crops and agricultural practices that prevent fungal colonization, and by promoting the rational use of antifungal drugs in human and animal health.

Exposure assessment in one central hospital: A multi-approach protocol to achieve an accurate risk characterization

The bioburden in a Hospital building originates not only from patients, visitors and staff, but is also disseminated by several indoor hospital characteristics and outdoor environmental sources. This study intends to assess the exposure to bioburden in one central Hospital with a multi-approach protocol using active and passive sampling methods. The microbial contamination was also characterized through molecular tools for toxigenic species, antifungal resistance and mycotoxins and endotoxins profile. Two cytotoxicity assays (MTT and resazurin) were conducted with two cell lines (Calu-3 and THP-1), and in vitro pro-inflammatory potential was assessed in THP-1 cell line. Out of the 15 sampling locations 33.3% did not comply with Portuguese legislation regarding bacterial contamination, whereas concerning fungal contamination 60% presented I/O > 1. Toxigenic fungal species were observed in 27% of the sampled rooms (4 out of 15) and qPCR analysis successfully amplified DNA from the Aspergillus sections Flavi and Fumigati, although mycotoxins were not detected. Growth of distinct fungal species was observed on Sabouraud dextrose agar with triazole drugs, such as Aspergillus section Versicolores on 1 mg/L VORI. The highest concentrations of endotoxins were found in settled dust samples and ranged from 5.72 to 23.0 EU.mg^-1. While a considerable cytotoxic effect (cell viability < 30%) was observed in one HVAC filter sample with Calu-3 cell line, it was not observed with THP-1 cell line. In air samples a medium cytotoxic effect (61-68% cell viability) was observed in 3 out of 15 samples. The cytokine responses produced a more potent average cell response (46.8 ± 12.3 ρg/mL IL-1β; 90.8 ± 58.5 ρg/mL TNF-α) on passive samples than air samples (25.5 ± 5.2 ρg/mL IL-1β and of 19.4 ± 5.2 ρg/mL TNF-α). A multi-approach regarding parameters to assess, sampling and analysis methods should be followed to characterize the biorburden in the Hospital indoor environment. This study supports the importance of considering exposure to complex mixtures in indoor environments.