Utilization of activated carbon as an effective replacement for a commercialized three-bed sorbent (Carbopack) to quantitate aromatic hydrocarbons in ambient air

The relative dominance of surface oxygen content over pore properties in controlling adsorption and retrograde behavior of gaseous toluene over microporous carbon

The adsorption potential of activated carbon (AC) derived from macadamia nut shells (product code of Procarb-900: namely, AC-P) has been investigated using gaseous toluene as the target pollutant. The powder AC-P with high-microporosity (96%) and oxygen content (5.62%) exhibited very high adsorption capacity (214 mg·g-1) and partition coefficient (PC: 25 mol·kg-1·Pa-1) against 100 ppm (10 Pa) toluene at 99% breakthrough levels (1 atm dry N2). The factors governing toluene adsorption were explored with respect to the key variables such as surface functional groups, pore size distribution, sorbent bed mass (50, 100, and 150 mg), and particle size (i.e., 0.212-0.6 mm (powder AC: PAC)) vs. 0.6-2.36 mm (granular AC: GAC)). Accordingly, the adsorption process was physical, mainly due to the non-polar interactions (i.e., π-π interactions) between the adsorbent and adsorbate molecules. The high affinity of AC-P at low breakthrough levels was obtained through a combination of smaller particle size (PAC) and larger adsorbent mass (i.e., 150 mg) with the appearance of a very pronounced retrograde phenomenon (e.g., at < 1% breakthrough level). As such, toluene adsorption appeared to be affected more sensitively by particle size and adsorbent mass (especially at low breakthrough levels) than by high microporosity. Most importantly, the oxygen content of AC emerges as one of the key factors governing the maximum capacity, as the changes in pore volume are not crucial to explain the observed adsorption patterns of toluene.

A figure of merits-based performance comparison of various advanced functional nanomaterials for adsorptive removal of gaseous ammonia

The implementation of sustainable industrial development based on energy/cost-effective techniques with zero/low rate of pollutant emission is an ideal strategy for the proper management of a natural environment. Gaseous ammonia released from a variety of anthropogenic sources (e.g., agriculture, pharmaceuticals, commercial cleaning products, and refrigerant) is estimated to be as high as 150 million tons∙year^-1. To reduce the negative effects of atmospheric ammonia, the great utility of advanced functional nanomaterials (e.g., metal organic frameworks, covalent organic polymers, metal/metal oxide nanoparticles, and carbon nanostructures) has been recognized. To gain a better understanding of the sorptive removal potential of diverse materials, their performance has been evaluated based on the key performance merits (e.g., initial concentration, sorption capacity, and partition coefficient). Generally, the PC values can be applied to significantly estimate the contaminant adsorption potential of NMs via balancing the biased influences of operating parameters (e.g., initial concentration of pollutants) as perceived for the partitioning of compounds between aqueous phases at equilibrium (e.g., Henry's Law). Therefore, in this work, we have proposed the PC as a prosperous performance merit (in terms of heterogeneity of surface and strength of adsorption process) for the selection of high performance nano-adsorbents for gaseous ammonia. Moreover, the water stability, recyclability, economic aspects, and future perspectives have also been discussed for real-world applications of advanced nanomaterial against gaseous ammonia adsorption. The outcome of this evaluation will be expedient for the classification/selection of the most effectual and cost-effective options for mitigation of environmental pollutants like gaseous ammonia.

A strategy for the enhancement of trapping efficiency of gaseous benzene on activated carbon (AC) through modification of their surface functionalities

Facile modification is a common, but effective, option to improve the uptake removal capacity of of activated carbon (AC) against diverse target volatile organic compounds (VOCs; e.g., benzene) in gaseous streams. To help design the routes for such modification, this research built strategies to generate three types of modified ACs by incorporating amine/sulfur/amino-silane groups under solvothermal or microwave (MW) thermal conditions. The adsorption performance has been tested using a total of six types of AC sorbents (three modified + three pristine forms) for the capture of 1 Pa benzene (1 atm and 298 K). The obtained results are evaluated in relation to their textural properties and surface functionalities. Accordingly, the enhancement of AC surface basicity (e.g., point of zero charge (PZC) = 10.25), attained via the silylation process, is accompanied by the reduced adsorption of benzene (a weak base). In contrast, ACs amended with amine/sulfur (electron-donating) groups using the MW technique are found to acquire high surface acidity (PZC of 5.99-6.05) to exhibit significantly improved benzene capturing capability (relative to all others). Their uplifted performance is demonstrated in terms of key performance metrics such as breakthrough volume (BTV10%: 163 → 443 L g^-1), adsorption capacity (Q10%: 4.82 → 13.6 mg g^-1), and partition coefficient (PC10%: 0.516 → 1.67 mol kg^-1 Pa^-1). Based on the kinetic analysis, the overall adsorption process is found to be governed by pore diffusion as the main rate-determining step, along with surface interaction mechanisms. The results of this research clearly support the critical role of surface chemistry of AC adsorbents and their textural properties in upgrading air/gas purification systems.

An efficient strategy for the enhancement of adsorptivity of microporous carbons against gaseous formaldehyde: Surface modification with aminosilane adducts

In an effort to develop a cost-effective mitigation tool for volatile organic compounds, particularly formaldehyde (FA), microporous activated carbon (AC) was modified into three different forms of AC-1, AC-2, and AC-3 using a raw commercial AC product (AC-0). First, AC-1 and AC-2 were produced by the modification of AC-0 with N/S heteroatoms using identical mixture of dicyandiamide and thiourea precursors through either solvothermal (AC-1) or microwave-assisted calcination (AC-2) synthesis. Second, aminosilane-functionalized AC (AC-3) was prepared solvothermally using N-[3-(Trimethoxysilyl)propyl]ethylenediamine reagent. The relative adsorption performances for gaseous FA (1 ppm) in terms of 10% breakthrough volume (BTV10: L atm g^-1) at near-ambient conditions (25 °C and 1 atm) were AC-3 (132) > AC-2 (66.5) > AC-1 (14.2) > AC-0 (10.4). In a comparison based on partition coefficients (mole kg^-1 Pa^-1) at BTV10, AC-3 outperformed AC-0 by a factor of 214, while the adsorption performance of AC-2 was 36-times higher than AC-1. The enhanced performance of AC-2 over AC-1 reflected the effect of the microwave synthesis protocol on the improvement of surface chemistry (e.g., N/S doping) and texture (e.g., surface area and pore volume) of AC-based adsorbents as compared to conventional solvothermal method. Further, the prominent role of surface chemistry (e.g., relative to textural properties), as observed with the increases in the amount of doped functional elements (including N:C and silicon:C ratios), is supported by the apparent dependence of performance on the selected modification procedures. Based on kinetic and X-ray photoelectron spectroscopy analyses, the superiority of aminosilylated AC-3 can be attributed to a synergistic effect between physisorption (e.g., pore diffusion) and chemical interactions of the FA carbonyl (C=O) group with amine and silica functionalities (via Mannich coupling [Schiff base] and cycloaddition reaction mechanisms, respectively). This confirms the significance of surface chemistry, relative to pore diffusion, in achieving maximum adsorption of gaseous FA molecules.

Removal and biotransformation of 4-nonylphenol by Arthrospira maxima and Chlorella vulgaris consortium

4-Nonylphenol (4-NP) is an anthropogenic contaminant found in different environmental matrices that has an effect over the biotic and abiotic factors within the environment. Bioremediation by microorganisms can be used as a potential treatment to remove this pollutant. In this work, a consortium of two microorganisms, Arthrospira maxima and Chlorella vulgaris, was employed to remove 4-NP from water. The parameters analyzed included cell growth, removal of 4-NP, and 4-NP remnant in the biomass. In addition, the metabolites produced in the process by this consortium were identified. It was found that C. vulgaris is more resistant to 4-NP than A. maxima (cell growth inhibition by 4-NP of 99%). The consortium used in this study had an IC₅₀ greater than any strain of microalgae or cyanobacteria reported for 4-NP removal (9.29 mg/L) and reduced up to 96% of 4-NP in water in the first 48 h of culture. It was also observed that there is a bio-transformation of 4-NP, comparable with the process carried out by another bacterium, in which three similar metabolites were found (4-(1-methyl-octyl)-4-hydroxy-cyclohex-2-enone, 4-nonyl-4-hydroxy-ciclohexa-2,5-dienone and 4-nonyl-4-hydroxy- ciclohex-2-enone) and one that is similar to plant metabolism (4-nonyl-(1-methyl,6,8-metoxy)-hydroxybenzene). These results indicate that microalgae and cyanobacteria consortium can be used to remove 4-NP from water.