An efficient tool for the continuous monitoring on adsorption of sub-ppm level gaseous benzene using an automated analytical system based on thermal desorption-gas chromatography/mass spectrometry approach

Thermocatalytic oxidation of a binary mixture of formaldehyde and toluene at ambient levels by a titanium dioxide supported platinum catalyst

The thermocatalytic oxidative potential of various supported noble metal catalysts (SNMCs) is well-known for hazardous volatile organic compounds (VOCs), e.g., formaldehyde (FA) and toluene. However, little is known about SNMC performance against ambient VOC pollution with low concentration (subppm levels) relative to industrial effuluents with high concentrations (several hundred ppm). Here, the thermocatalytic oxidation performance of a titanium dioxide (TiO2)-supported platinum catalyst (Pt/TiO2) has been evaluated for a low-concentration binary mixture of FA and toluene at low temperatures and in the dark. A sample of TiO2 containing 1 wt% Pt with thermal reduction pre-treatment under hydrogen achieved 100 % conversion of FA (500 ppb) and toluene (100 ppb) at 130 °C and a gas hourly velocity of 59,701 h-1. Its catalytic activity was lowered by either a decrease in catalyst mass or an increase in VOC concentration, relative humidity, or flow rate. In situ diffuse reflectance infrared Fourier transform spectroscopy, density functional theory simulations, and molecular oxygen (O2) temperature-programmed desorption experiments were used to identify possible VOC oxidation pathways, reaction mechanisms, and associated surface phenomena. The present work is expected to offer insights into the utility of metal oxide-supported Pt catalysts for the low-temperature oxidative removal of gaseous VOCs in the dark, primarily for indoor air quality management.

The relative dominance of surface oxygen content over pore properties in controlling adsorption and retrograde behavior of gaseous toluene over microporous carbon

The adsorption potential of activated carbon (AC) derived from macadamia nut shells (product code of Procarb-900: namely, AC-P) has been investigated using gaseous toluene as the target pollutant. The powder AC-P with high-microporosity (96%) and oxygen content (5.62%) exhibited very high adsorption capacity (214 mg·g-1) and partition coefficient (PC: 25 mol·kg-1·Pa-1) against 100 ppm (10 Pa) toluene at 99% breakthrough levels (1 atm dry N2). The factors governing toluene adsorption were explored with respect to the key variables such as surface functional groups, pore size distribution, sorbent bed mass (50, 100, and 150 mg), and particle size (i.e., 0.212-0.6 mm (powder AC: PAC)) vs. 0.6-2.36 mm (granular AC: GAC)). Accordingly, the adsorption process was physical, mainly due to the non-polar interactions (i.e., π-π interactions) between the adsorbent and adsorbate molecules. The high affinity of AC-P at low breakthrough levels was obtained through a combination of smaller particle size (PAC) and larger adsorbent mass (i.e., 150 mg) with the appearance of a very pronounced retrograde phenomenon (e.g., at < 1% breakthrough level). As such, toluene adsorption appeared to be affected more sensitively by particle size and adsorbent mass (especially at low breakthrough levels) than by high microporosity. Most importantly, the oxygen content of AC emerges as one of the key factors governing the maximum capacity, as the changes in pore volume are not crucial to explain the observed adsorption patterns of toluene.