Spatial distribution patterns and human exposure risks of polycyclic aromatic hydrocarbons, organochlorine pesticides and polychlorinated biphenyls in Nepal using tree bark as a passive air sampler

Concentration identification and endpoint-oriented health risk assessments on a broad-spectrum of organic compounds in atmospheric fine particles: A sampling experimental study in Beijing, China

Understanding the complicate chemical components in atmospheric fine particulate matter (PM2.5) helps policy makers for pollutants control track progress and identify disparities in overall health risks. However, till now, information on accurate component detection, source identification, and effect-oriented risk assessment is scarce, especially for the simultaneous analysis of a broad-spectrum of compounds. In this study, a high-throughput target method was employed to distinguish the occurrence and characteristics of 152 chemicals: phthalate esters (PAEs), organophosphate esters (OPEs), carboxylic acid esters (CAEs), nitrophenols (NPs), nitrogen heterocyclic compounds (NHCs), per- and poly-fluoroalkyl substances (PFASs), triclosan and its derivatives (TCSs), and organosulfates (OSs) in ambient PM2.5 collected from Beijing, China. Detection frequencies of 77 targeted compounds were >50 %. Total concentrations of all compounds ranged from 33.1 to 745 ng/m3. The median concentration of ∑PAEs (108 ng/m3) was the highest, followed by ∑CAEs (12.2 ng/m3) and ∑NPs (10.1 ng/m3). Organophosphate diesters (di-OPEs) and TCSs were reported for the first time in ambient PM2.5. The pollutants mainly originated from the local industrial production, release of building materials, and environmental degradation of parent compounds. Based on absorption, distribution, metabolism, excretion, and toxicity (ADMET)-oriented risk evaluations, we found that bis (2-ethylhexyl) phthalate, diisobutyl phthalate, dibutyl phthalate, and di (2-ethylhexyl) adipate have high health risks. Additionally, the high oxidative stress potential of 4-nitrocatechol and the strong blood-brain barrier penetration potential of triclosan cannot be ignored. Our study will facilitate the evaluations of specific health outcomes and mechanisms of pollutants, and suggestion of pollutants priority control to reduce human health hazards caused by atmospheric particles.

Review of scientific literature on available methods of assessing organochlorine pesticides in the environment

Organochlorine pesticides (OCPs) are persistent organic pollutants (POPs) widely used in agriculture and industry, causing serious health and ecological consequences upon exposure. This review offers a thorough overview of OCPs analysis emphasizing the necessity of ongoing work to enhance the identification and monitoring of these POPs in environmental and human samples. The benefits and drawbacks of the various OCPs analysis techniques including gas chromatography-mass spectrometry (GC-MS), gas chromatography-electron capture detector (GC-ECD), and liquid chromatography-mass spectrometry (LC-MS) are discussed. Challenges associated with validation and optimization criteria, including accuracy, precision, limit of detection (LOD), and limit of quantitation (LOQ), must be met for a method to be regarded as accurate and reliable. Suitable quality control measures, such as method blanks and procedural blanks, are emphasized. The LOD and LOQ are critical quality control measure for efficient quantification of these compounds, and researchers have explored various techniques for their calculation. Matrix interference, solubility, volatility, and partition coefficient influence OCPs occurrences and are discussed in this review. Validation experiments, as stated by European Commission in document SANTE/11813/2017, showed that the acceptance criteria for method validation of OCP analytes include ≤20 % for high precision, and 70-120 % for recovery. This may ultimately be vital for determining the human health risk effects of exposure to OCP and for formulating sensible environmental and public health regulations.

Application of the multimedia fugacity model in predicting the environmental behaviors of PCBs: Based on field measurements and level III fugacity model simulation

The comprehensive understanding of PCBs' fate has been impeded by the lack of simultaneous monitoring of PCBs in multiple environmental media in the background areas, which were considered long-term sinks for highly chlorinated PCBs. To address this gap, this study analyzed soils, willow tree barks, water, suspended particulate matter (SPM), and sediment samples collected from the middle reach of the Huaihe River in China for 27 PCBs. The results showed that the levels of ∑27PCBs in the soils were comparable to or lower than the background values worldwide. There were no significant correlations between organic matter and ∑27PCB concentrations in the soils and sediments. Additionally, the contamination of dioxin-like PCBs in the aquatic environment of the study area deserves more attention than in the soils. Applying the level III fugacity model to PCB 52, 77, 101, and 114 revealed that the soil was the primary reservoir, and air-soil exchange was the dominant intermedia transfer process, followed by air-water exchange. Furthermore, simulated results of air-soil and air-water diffusion were compared with those calculated from the field concentrations to predict the potential environmental behaviors of PCBs. Results indicated that the studied river would be a "secondary source" for PCB 52, 77, and 101. However, PCB 52, 77, 101, and 114 would continue to transfer from the air to the soil. This study combines multimedia field measurements and the fugacity model, providing a novel approach to predicting the potential environmental behaviors of PCBs.

Polycyclic aromatic compounds (PACs) in tree barks and tree cores of a national large-scale coal-fired power base of China: Sources, atmospheric toxicities, and pollution histories

Polycyclic aromatic compounds (PACs) are important hazardous air pollutants in China due to the country's coal-dominant energy structure. In order to reveal the pollution characteristics, sources, toxicity, and pollution historical trends of PACs in the atmosphere of the middle reach of the Huaihe River (MRHR), a large-scale coal-fired power base of China, tree barks and tree cores were collected and employed as passive air samplers and historical trend recorders, and 76 PACs were identified for the first time. ΣPACs in tree barks ranged from 170 to 3800 ng g^-1 (mean = 700 ± 720 ng g^-1), with the high concentrations observed mainly in the coal-mining and coal-bearing area. 16 priority PAHs (PriPAHs) were the predominant substances and accounted for 59 ± 8.3 % of ΣPACs. The combustion of coal and fuel oil was the most significant source of PACs, accounting for 43 % of ΣPACs, followed by the combustion of biomass (30 %) and non-combustion sources (27 %). Based on a bark-air partitioning model, volumetric air concentrations for ΣPACs were calculated to be 450-11,000 ng m^-3 (mean = 1600 ± 2000 ng m^-3). The BaP-toxic equivalent concentrations (TEQ_BaP) of ΣPACs (mean = 9.7 ± 15 ng m^-3) were significantly higher than the Chinese guideline (1 ng m^-3) and were mostly caused by coal & fuel oil combustion (55 ± 13 %). High molecular weight PACs were detected in lower percentages in tree cores than in tree barks, indicating that PACs in the particle phase were difficult to enter the tree core. Major PACs decreased in tree core samples between 2000 and 2020 as pollution control efforts improved, however, some PACs showed different trends when influenced by point sources.

Effectively removing gaseous polycyclic aromatic hydrocarbons (PAHs) by willow catkins: Do you still dislike the catkins floating?

The floating catkins generated by willow and poplar trees have been criticized for spreading germ and causing fire for decades. It has been found that catkins are with a hollow tubular structure, which made us wonder if the floating catkins can adsorb atmospheric pollutions. Thus, we conducted a project in Harbin, China to investigate whether and how willow catkins could adsorb atmospheric polycyclic aromatic hydrocarbons (PAHs). The results suggest that both the catkins floating in the air and on the ground preferred to adsorb gaseous PAHs rather than particulate PAHs. Moreover, 3- and 4-ring PAHs were the dominating compositions adsorbed by catkins, which significantly increased with exposure time. The gas/catkins partition (K_CG) was defined, which explained why 3-ring PAHs are more easily adsorbed by catkins than by airborne particles when their subcooled liquid vapor pressure is high (log P_L > -1.73). The removal loading of atmospheric PAHs by catkins were estimated as 1.03 kg/year in the center city of Harbin, which may well explain the phenomenon that levels of gaseous and total (particle + gas) PAHs are relatively low in the months with catkins floating reported in peer-reviewed papers.

Evaluation of the spatiotemporal variations of organochlorine pesticides, polychlorinated biphenyls and polycyclic aromatic hydrocarbons in the forests of the Himalaya and Hengduan mountains using tree bark and tree core samples

There have been few reports of the large-scale spatial distribution and long-term historical variations of pollutants in high-altitude forests. Tree bark and tree core samples were collected from forests in the Himalaya and Hengduan mountains to determine the spatiotemporal variations of persistent organic pollutants. The average concentrations of dichlorodiphenyl trichloroethanes (DDTs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB), polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in tree bark samples were 9.09, 0.10, 0.13, 0.11and 26 ng/g dry weight, respectively, and 1.30, 0.02, 0.17, 0.07 and 186 ng/g dry weight, respectively, in tree core samples. Higher levels of these pollutants were observed in the forests on the southern slopes of the Himalaya (Nepal) and the southern part of the Hengduan mountains (Yunnan, China). Lower concentrations of these pollutants were found in the interior of the Tibetan Plateau on the northern slopes of the Himalaya as a result of the blocking effect of these mountain ranges. The concentrations of DDTs and HCHs in Himalayan tree cores showed increasing trends from 1956 to 1975 when they were used as pesticide extensively worldwide, especially in India. Peak concentrations of DDTs, HCHs and PAHs in tree cores of Qamdo located in Hengduan Mountains were observed in 2013, which were consistent with the history of industrial and agricultural development in Sichuan. This study provides new insights into the impact of atmospheric pollutants in South and Southeast Asia.

Impact of global warming on regional cycling of mercury and persistent organic pollutants on the Tibetan Plateau: current progress and future prospects

Global warming profoundly affects not only mountainous and polar environments, but also the global and regional cycling of pollutants. Mercury (Hg) and persistent organic pollutants (POPs) have global transport capacity and are regulated by the Minamata Convention and Stockholm Convention, respectively. Since the beginning of this century, understanding of the origin and fate of Hg and POPs on the Tibetan Plateau (TP, also known as the third pole) has been deepening. In this paper, the existing literature is reviewed to comprehensively understand the atmospheric transport, atmospheric deposition, cumulative transformation and accumulation of Hg and POPs on the TP region under the background of global warming. The biogeochemical cycle of both Hg and POPs has the following environmental characteristics: (1) the Indian summer monsoon and westerly winds carry Hg and POPs inland to the TP; (2) the cold trapping effect causes Hg and POPs to be deposited on the TP by dry and wet deposition, making glaciers, permafrost, and snow the key sinks of Hg and POPs; (3) Hg and POPs can subsequently be released due to the melting of glaciers and permafrost; (4) bioaccumulation and biomagnification of Hg and POPs have been examined in the aquatic food chain; (5) ice cores and lake cores preserve the impacts of both regional emissions and glacial melting on Hg and POP migration. This implies that comprehensive models will be needed to evaluate the fate and toxicity of Hg and POPs on larger spatial and longer temporal scales to forecast their projected tendencies under diverse climate scenarios. Future policies and regulations should address the disrupted repercussions of inclusive CC such as weather extremes, floods and storms, and soil sustainable desertification on the fate of Hg and POPs. The present findings advocate the strengthening of the cross-national programs aimed at the elimination of Hg and POPs in polar (Arctic, Antarctic and TP) and certain mountainous (the Himalaya, Rocky Mountains, and Alps) ecosystems for better understanding the impacts of global warming on the accumulation of Hg/POPs in cold and remote areas.

Toxicity of polychlorinated biphenyls in aquatic environments - A review

The assessment of polychlorinated biphenyls (PCBs) and their congeners resulting from the pollution of all environmental media is inherently related to its persistence and ubiquitous nature. In principle, determination of this class of contaminants are limited to the determination of their concentrations in the various environmental matrices. For solving many problems in this context, knowledge of the emission sources of PCBs, transport pathways, and sites of contamination and biomagnification is of great benefit to scientists and researchers, as well as many regulatory organizations. By far the largest amounts of PCBs, regardless of their discharged points, end up in the soil, sediment and finally in different aquatic environments. By reviewing relevant published materials, the source of origin of PCBs in the environment particularly from different pollution point sources, it is possible to obtain useful information on the nature of different materials that are sources of PCBs, or their concentrations and their toxicity or health effects and how they can be removed from contaminated media. This review focuses on the sources of PCBs in aquatic environments and critically reviews the toxicity of PCBs in aquatic animals and plants. The review also assesses the toxicity equivalency factors (TEFs) of PCBs providing valuable knowledge to other scientists and researchers that enables regulatory laws to be formulated based on selective determination of concentrations regarding their maximum permissible limits (MPLs) allowed. This review also supplies a pool of valuable information useful for designing decontamination technologies for PCBs in media like soil, sediment, and wastewaters.

Atmospheric concentration, spatial variations, and source identification of persistent organic pollutants in urban and semi-urban areas using passive air samplers in Bursa, Turkey

In this study, the concentration of ambient persistent organic pollutants (POPs) such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs) were measured for 12 months in urban and semi-urban areas using a passive air sampler. During the sampling period, a total of 14 PAH (∑₁₄PAH) concentrations measured in urban and semi-urban areas were found to be 54.4 ± 22.6 ng/m³ and 51.7 ± 34.3 ng/m³, respectively. Molecular diagnostic ratios (MDRs) were used to determine PAH sources. According to the MDR values, combustion sources were the most important PAH sources in both sampling areas. However, since the urban area is close to the industrial zone, the combustion sources occurred at high temperatures (> 800 °C), while the sources in the semi-urban area generally consisted of petrogenic fuel combustion. ∑₅₀PCB concentrations measured in the urban and semi-urban areas were found to be 522.5 ± 196.9 pg/m³ and 439.5 ± 166.6 pg/m³, respectively. Homologous group distributions were used to determine the source of PCBs. According to the homologous group distributions, tri-, tetra-, and penta-chlorinated PCBs were dominant in both sampling areas. ∑₁₀OCP concentrations measured in urban and semi-urban areas were found as 242.5 ± 104.6 pg/m³ and 275.9 ± 130.9 pg/m³, respectively. Also, α-HCH/γ-HCH and β-/(α + γ)-HCH ratios were used to determine the source of OCPs. Lindane was the predominant OCP in both sampling areas.

Century-long record of polycyclic aromatic hydrocarbons from tree rings in the southeastern Tibetan Plateau

Limited studies have been carried out on the historical variations of atmospheric polycyclic aromatic hydrocarbons (PAHs), especially in remote regions of the world. In this study, century-long record of PAHs (1916-2018) were reconstructed from tree rings in the remote southeastern Tibetan Plateau (TP). The total concentrations of 15 PAHs varied from 27.5 to 6.05 × 10² ng/g dry weight (dw), with a mean value of 1.40 × 10² ng/g dw. Higher levels of PAHs were observed during World War Ⅱ and the Peaceful Liberation of Tibet, and increasing trends were observed starting from rapid industrialization in India. Both the isomer ratios and the positive matrix factorization model results indicated biomass and coal combustion were the dominant sources of PAHs. The carcinogenic risk of PAHs to local residents was assessed, which might have been negligible in most past periods and lower than in other regions of the world. Nevertheless, since the beginning of the 21st century, the cancer risk has been increasing year by year, indicating more actions are needed to reduce emissions of PAHs. This study provides an idea for reconstructing the pollution history of PAHs at the global scale.

The Research Progress of the Influence of Agricultural Activities on Atmospheric Environment in Recent Ten Years: A Review

In recent years, the industrial emission of air pollution has been reduced via a series of measures. However, with the rapid development of modern agriculture, air pollution caused by agricultural activities is becoming more and more serious. Agricultural activities can generate a large amount of air pollutants, such as ammonia, methane, nitrogen oxides, volatile organic compounds, and persistent organic pollutants, the sources of which mainly include farmland fertilization, livestock breeding, pesticide use, agricultural residue burning, agricultural machinery, and agricultural irrigation. Greenhouse gases emitted by agricultural activities can affect regional climate change, while atmospheric particulates and persistent organic pollutants can even seriously harm the health of surrounding residents. With the increasing threat of agricultural air pollution, more and more relevant studies have been carried out, as well as some recommendations for reducing emissions. The emissions of ammonia and greenhouse gases can be significantly reduced by adopting reasonable fertilization methods, scientific soil management, and advanced manure treatment systems. Regarding pesticide use and agricultural residues burning, emission reduction are more dependent on the restriction and support of government regulations, such as banning certain pesticides, prohibiting open burning of straw, and supporting the recycling and reuse of residues. This review, summarizing the relevant research in the past decade, discusses the current situation, health effects, and emission reduction measures of agricultural air pollutants from different sources, in order to provide some help for follow-up research.