Competitive adsorption and desorption of three tetracycline antibiotics on bio-sorbent materials in binary systems

Enhancement of carbon nanotubes on microalgal-fungal consortium formation and wastewater treatment

As a promising material with an efficient light capture capability, a low amount of carbon nanotubes can affect growth and photosynthesis by regulating microalgal cells, thereby enhancing the pollutant removal efficiency in wastewater. In this study, microalgal-fungal consortia of Chlorella vulgaris and Ganoderma lucidum were developed with different types and concentrations of carbon nanotubes. The treatment effect of microalgal-fungal consortia on simulated digestate was also studied. The results demonstrate that 1.5 mg/L of carboxylated multi-walled carbon nanotubes remarkably promoted the formation, growth and photosynthesis of consortium. The dry weight and chlorophyll a content reached 19.3 ± 0.53 mg/symbiont and 27.3 ± 0.52 μg/L, respectively. Moreover, the removal efficiency of chemical oxygen demand, total nitrogen, total phosphorus and tetracycline hydrochloride were 94.1%, 65.5%, 61.9% and 96.2%, respectively. Overall, these findings suggest a promising future for the use of carbon nanotubes in wastewater treatment by regulating microalgal-fungal consortia.

High capacity adsorption of oxytetracycline by lignin-based carbon with mesoporous structure: Adsorption behavior and mechanism

In this study, an adsorbent with mesoporous structure and PO/PO bonds is prepared by hydrothermal and phosphoric acid activation from industrial alkali lignin for the adsorption of oxytetracycline (OTC). The adsorption capacity is 598 mg/g, which is three times higher than that of the adsorbent with microporous structure. The rich mesoporous structure of the adsorbent provides adsorption channels and filling sites, and π-π attraction, cation-π interaction, hydrogen bonds, and electrostatic attraction provide adsorption forces at the adsorption sites. The removal rate of OTC exceeds 98 % over a wide range of pH values (3-10). It has high selectivity for competing cations in water, with higher than 86.7 % removal rate of OTC from medical wastewater. After 7 consecutive adsorption-desorption cycles, the removal rate of OTC remains as high as 91 %. This efficient removal rate and excellent reusability indicate the strong potential of the adsorbent for industrial applications. This study prepares a highly efficient, environmentally friendly antibiotic adsorbent that can not only efficiently remove antibiotics from water but also recycle industrial alkali lignin waste.

Insights into adsorption mechanisms of nitro polycyclic aromatic hydrocarbons on common microplastic particles: Experimental studies and modeling

Nitro polycyclic aromatic hydrocarbons (NPAHs) and microplastics (MPs) are emerging contaminants that pose a threat to the aquatic ecosystem. Knowledge of the NPAHs and MPs interaction will help the understanding of their fate and risks in natural environment. Here, the adsorption behavior and mechanism of typical NPAHs on microplastics were investigated. The adsorption kinetic and isotherm data showed that the adsorption of NPAHs was controlled by chemical adsorption and hydrophobic partition, because of excellent fit of kinetic and isothermal equations (R² > 0.9). The adsorption capacity (587-744 μg g^-1) was largely dependent on the hydrophobicity of NPAHs. The experiment of environmental factors confirmed the important role of pollutant hydrophobicity, with 1-Npyr of the highest hydrophobicity having the greatest adsorption on MPs (adsorption rate >90%) and less affected by solution pH and ionic strength (changer <5%). In the mixture system, MPs displayed high adsorption capacity for each compound; Interestingly, because compounds with smaller size were easy to occupy the adsorption sites in the pores of MPs, the adsorption of 2-Nflu (724 μg g^-1) was even greater than that of 9-Nant (713 μg g^-1) and 1-Npyr (703 μg g^-1). The model calculation of adsorption also shows that there is surface adsorption and hydrophobic distribution in the adsorption process. The findings provide new insights into the interactions of MPs with organic pollutants in complex environments.

A dual-signal fluorescent colorimetric tetracyclines sensor based on multicolor carbon dots as probes and smartphone-assisted visual assay

The widespread presence of tetracyclines in the environment has raised concerns about the potential risks to ecosystems and human health. The ratiometric fluorescence sensor for detecting tetracyclines was developed using europium-doped carbon dots (Eu-CDs) as probes under alkaline conditions. The sensing mechanism of sensor for tetracyclines was considered as inner filter effect (IFE), antenna effect (AE), and self-quenching effect (SQE). The sensor had a wide linear detection range than the reported europium ions-based tetracyclines sensors. The linear detection ranges of oxytetracycline (OTC), tetracycline (TC), doxycycline (DC) and chlorotetracycline (CTC) were respectively 0.00-603.75 μM, 0.00-623.82 μM, 0.00-594.61 μM and 0.00-601.54 μM, and the corresponding detection limits were respectively 9.50 nM, 15.80 nM, 10.40 nM and 90.30 nM. The smartphone with RGB Color Picker was further employed to analyze the concentration of tetracyclines, which provided a new method for visual tetracyclines detection. The application of Eu-CDs test paper was also explored, and the results showed that the Eu-CDs test paper has great potential application in the visual detection of tetracyclines. In addition, the accuracy of the established tetracyclines sensor was compared with that of the China national standard method by high-performance liquid chromatography (HPLC), and the results showed that the established method in this work has similar accuracy to the China national standard method. The sensor has been employed to detect tetracyclines in the actual samples with satisfactory results, which indicated that this method has promising applications in the real-time monitoring tetracyclines of food and environment.

Effect of GR24 concentrations on tetracycline and nutrient removal from biogas slurry by different microalgae-based technologies

A biogas slurry composed of carbon, nitrogen, phosphorus, and antibiotics was generated. Investigations into the nutrient and tetracycline removal performance of four microalgae-based contaminant removal technologies, including Chlorella vulgaris, C. vulgaris co-cultured with endophytic bacteria, C. vulgaris co-cultured with Ganoderma lucidum, and C. vulgaris co-cultured with G. lucidum and endophytic bacteria, were conducted. The algal-bacterial-fungal consortium with 10^-9 M strigolactone (GR24) yielded the maximum growth rate and average daily yield for algae at 0.325 ± 0.03 d^-1 and 0.192 ± 0.02 g L^-1 d^-1, respectively. The highest nutrient/ tetracycline removal efficiencies were 83.28 ± 7.95 % for chemical oxygen demand (COD), 82.62 ± 7.97 % for total nitrogen (TN), 85.15 ± 8.26 % for total phosphorus (TP) and 83.92 ± 7.65 % for tetracycline. Adding an algal-bacterial-fungal consortium with an optimal synthetic analog GR24 concentration is seemingly an encouraging strategy for enhancing pollutant removal by algae, possibly overcoming the challenges of eutrophication and antibiotic pollution.

Two novel and efficient plant composites for the degradation of oxytetracycline: nanoscale ferrous sulphide supported on rape straw waste

As a biomass waste, rape straw shows a good application prospect in heterogeneous catalyst preparation due to its low-cost and stable structure. In this study, FeS-modified rape straw (RS-FeS) and its biochar (RSBC-FeS) were firstly synthesized to remove oxytetracycline (OTC). The highest OTC removal capacities observed for RS-FeS and RSBC-FeS were 635.66 and 827.80 mg g^-1. When compared with the adsorption process, the degradation ratios of the total OTC removal capacity observed in the RS-FeS/H₂O₂ and RSBC-FeS/H₂O₂ systems were 70.14 and 79.35%. Degradation was the dominant process observed during the removal of OTC. Both radical (SO₄^•-, ^•OH, and O₂^•-) and non-radical (¹O₂ and Ov) pathways were involved in the degradation process. OTC was degraded into smaller molecules via hydroxylation, dehydration, quinonization, demethylation, decarbonylation, alcohol oxidation, and ring cleavage reaction, indicating two catalysts could efficiently mineralize organic pollutants. The highest total organic carbon removal efficiencies of observed for RS-FeS and RSBC-FeS in swine wastewater were 88.93 and 96.81%, respectively. In addition, OTC removal efficiency of RS-FeS was more than 80% in successive experiments, further suggesting the feasibility of rape straw to Fenton-like catalysts. In this study, FeS nanoparticles were directly loaded on rape straw for the first time. Compared with biochar, FeS-modified rape straw can also degrade OTC efficiently, which provides an eco-friendly, high-efficient, and sustainable strategy for the preparation of catalyst.

Cu and As(V) Adsorption and Desorption on/from Different Soils and Bio-Adsorbents

This research is concerned with the adsorption and desorption of Cu and As(V) on/from different soils and by-products. Both contaminants may reach soils by the spreading of manure/slurries, wastewater, sewage sludge, or pesticides, and also due to pollution caused by mining and industrial activities. Different crop soils were sampled in A Limia (AL) and Sarria (S) (Galicia, NW Spain). Three low-cost by-products were selected to evaluate their bio-adsorbent potential: pine bark, oak ash, and mussel shell. The adsorption/desorption studies were carried out by means of batch-type experiments, adding increasing and individual concentrations of Cu and As(V). The fit of the adsorption data to the Langmuir, Freundlich, and Temkin models was assessed, with good results in some cases, but with high estimation errors in others. Cu retention was higher in soils with high organic matter and/or pH, reaching almost 100%, while the desorption was less than 15%. The As(V) adsorption percentage clearly decreased for higher As doses, especially in S soils, from 60−100% to 10−40%. The As(V) desorption was closely related to soil acidity, being higher for soils with higher pH values (S soils), in which up to 66% of the As(V) previously adsorbed can be desorbed. The three by-products showed high Cu adsorption, especially oak ash, which adsorbed all the Cu added in a rather irreversible manner. Oak ash also adsorbed a high amount of As(V) (>80%) in a rather non-reversible way, while mussel shell adsorbed between 7 and 33% of the added As(V), and pine bark adsorbed less than 12%, with both by-products reaching 35% desorption. Based on the adsorption and desorption data, oak ash performed as an excellent adsorbent for both Cu and As(V), a fact favored by its high pH and the presence of non-crystalline minerals and different oxides and carbonates. Overall, the results of this research can be relevant when designing strategies to prevent Cu and As(V) pollution affecting soils, waterbodies, and plants, and therefore have repercussions on public health and the environment.

CFD simulation of a swirling vortex cavitator and its degradation performance and pathway of tetracycline in aqueous solution

The vortex cavitation technology shows a great development potential for antibiotic wastewater treatment. We have designed a novel swirling vortex cavitator for tetracycline degradation in aqueous solution. By Computational Fluid Dynamics (CFD) simulation using ANSYS CFX flow field calculation software, it was found that the vortex cavitator could form a low-pressure area far lower than the saturated vapor pressure at experimental temperature, resulting in generation of obvious vortex cavitation effect, which also proved by the concentration of hydroxyl radical of 4.58 μmol/L measured by methylene blue method. Moreover, the tetracycline degradation process may be mainly caused by the oxidation of hydroxyl radicals. The batch experiments results showed when the degradation time was 30 min, the vortex cavitator had a good degradation ability of tetracycline in pH range of 5.0–9.0. The degradation efficiency of 2.0 mg/L tetracycline solution was 76.45% within 50 min at pH 7.0. The possible intermediate products of tetracycline were determined by HPLC-MS Spectrometry. A series of reactions including hydroxylation, decarbonylation and C–N bond cleavage, ring-opening, and removing two methyl groups in the carbon atom ring, occur during the degradation.

SARS-CoV-2 and other main pathogenic microorganisms in the environment: Situation in Galicia and Spain

In the context of the current COVID-19 pandemic, and mostly taking a broad perspective, it is clearly relevant to study environmental factors that could affect eventual future outbreaks due to coronaviruses and/or other pathogenic microorganisms. In view of that, the authors of this manuscript review the situation of SARS-CoV-2 and other main pathogenic microorganisms in the environment, focusing on Galicia and Spain. Overall, in addition to showing local data, it is put in evidence that, summed to all efforts being carried out to treat/control this and any other eventual future epidemic diseases, both at local and global levels, a deep attention should be paid to ecological/environmental aspects that have effects on the planet, its ecosystems and their relations/associations with the probability of spreading of eventual future pandemics.

Tetracycline-induced decoupling of symbiosis in microalgal-bacterial granular sludge

Tetracycline has been frequently detected in municipal wastewater due to its extended use for various purposes. This study investigated the influence of tetracycline on non-aerated microalgal-bacterial granular sludge cultivated for municipal wastewater treatment. It was found that ammonia-N removal rate decreased at the tetracycline concentrations of 1 and 10 mg/L. A mass balance on nitrogen further revealed that the observed ammonia-N removal could be mainly attributed to microalgal assimilation which was inhibited by tetracycline at the concentrations studied. In fact, reduced production of chlorophyll in microalgae was observed in the presence of tetracycline, leading to decreased ammonia-N removal rate. Meanwhile, decreased dissolved oxygen (DO) concentration at high tetracycline concentration also indicated inhibition of microalgae. Furthermore, the relative abundances of microalgae containing green algae and cyanobacteria were inhibited by tetracycline. The results gathered in this study indicated the tetracycline-induced decoupling of symbiosis in microalgal-bacterial granular sludge. It is expected that this study can shed lights on the behaviors of non-aerated microalgal-bacterial granules in response to the presence of tetracycline during municipal wastewater treatment.

Effectively removing tetracycline from water by nanoarchitectured carbons derived from CO2: Structure and surface chemistry influence

Understanding of the correlation between physico-chemical property of adsorbent and the adsorption performance of contaminant is very significant for developing high-efficient materials to remove antibiotic contamination from water. In this work, a novel kind of carbon adsorbent (EC) derived from CO₂ and activated ECs with modified structure via a facile chemical method using H₂ and KOH were prepared. The synthetic carbon materials (EC, EC-H₂, and EC-KOH) were then applied to remove tetracycline (TC). The kinetics of adsorption for these three carbon materials all well fitted the pseudo-second-order kinetic model. The experimental data of adsorption isotherm had good compatibility with Langmuir and Freundlich models (R² > 0.90), but the Temkin model was the most applicable for all adsorbents (R² > 0.98). A super-high adsorption capacity of EC-KOH obtained from Langmuir fitting was 933.56 mg g^-1, which was much higher than that of EC-H₂ (538.91 mg g^-1) and EC (423.30 mg g^-1), possibly due to its larger specific surface area (S_BET), pore volume, and specific surface chemical structure. Moreover, it was found that surface functional groups and large aperture of adsorbents had a positive effect on adsorption rate. More adsorption sites and surface functional groups of adsorbents were beneficial to enhance the adsorption affinity. These results are of great benefit to the directional control of carbon structure to increase the adsorption performance in rate, capacity, and affinity of antibiotics.

Use of waste materials to prevent tetracycline antibiotics toxicity on the growth of soil bacterial communities

The increase of concentrations of tetracycline antibiotics in agricultural soils worldwide is of special concern, due to its potential toxic effects on soil bacterial communities. In the present work, the reuse of two waste/by-product materials as soil amendments was tested as a preventive practice for reducing tetracycline antibiotics toxicity in soils. Pine bark (PB), with high percentage of organic carbon, and crushed mussel shell (CMS), a frequent natural liming material, were added to 4 soils in doses 0, 6, 12 and 48 g of by-product per kg^-1 of soil (dry weight) of each one (separately). The soils and soil-waste mixtures were then spiked with tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC). After one day of incubation, the bacterial growth was estimated in soils and soil-mixtures using the leucine incorporation technique. The addition of PB to the soils showed two different behaviors, depending on the antibiotics. The toxicity of TC and OTC decreased with the addition of PB (toxicities going from 6 to 25% and from 5 to 36%, respectively). However, CTC toxicity did not change, or even increased in response to the PB amendment. Regarding soil amendment with CMS, it was not effective to prevent the toxicity of any of the three antibiotics studied.

Adsorption of Tetracycline and Sulfadiazine onto Three Different Bioadsorbents in Binary Competitive Systems

Different antibiotics contained in manure, slurry, wastewater or sewage sludge are spread into the environment. The harmful effects of these antibiotics could be minimized by means of immobilization onto bioadsorbent materials. This work investigates the competitive adsorption/desorption of tetracycline (TC) and sulfadiazine (SDZ) onto pine bark, oak ash and mussel shell. The study was carried out using batch-type experiments in binary systems (with both antibiotics present simultaneously), adding 5 equal concentrations of the antibiotics (between 1 and 50 µmol L−1). The adsorption percentages were higher for TC (close to 100% onto pine bark and oak ash, and between 40 and 85% onto mussel shell) than for SDZ (75–100% onto pine bark, and generally less than 10% on oak ash and mussel shell). Pine bark performed as the best adsorbent since TC adsorption remained close to 100% throughout the entire concentration range tested, while it was between 75 and 100% for SDZ. Desorption was always higher for SDZ than for TC. The results of this study could be useful to design practices to protected environmental compartments receiving discharges that simultaneously contain the two antibiotics here evaluated, and therefore could be relevant in terms of protection of the environment and public health.