Systematic evaluation of activated carbon-Fe3O4 composites for removing and degrading emerging organic pollutants

Recent trends in magnetic spinel ferrites and their composites as heterogeneous Fenton-like catalysts: A review

In recent years, there has been a growing interest in utilizing spinel ferrite and their nanocomposites as Fenton-like catalysts. The use of these materials offers numerous advantages, including ability to efficiently degrade pollutants and potential for long-term and repeated use facilitated by their magnetic properties that make them easily recoverable. The remarkable catalytic properties, stability, and reusability of these materials make them highly attractive for researchers. This paper encompasses a comprehensive review of various aspects related to the Fenton process and the utilization of spinel ferrite and their composites in catalytic applications. Firstly, it provides an overview of the background, principles, mechanisms, and key parameters governing the Fenton reaction, along with the role of physical field assistance in enhancing the process. Secondly, it delves into the advantages and mechanisms of H2O2 activation induced by different spinel ferrite and their composites for the removal of organic pollutants, shedding light on their efficacy in environmental remediation. Thirdly, the paper explores the application of these materials in various Fenton-like processes, including Fenon-like, photo-Fenton-like, sono-Fenton-like, and electro-Fenton-like, for the effective removal of different types of contaminants. Furthermore, it addresses important considerations such as the toxicity, recovery, and reuse of these materials. Finally, the paper presents the challenges associated with H2O2 activation by these materials, along with proposed directions for future improvements.

LED-driven photo-Fenton process for micropollutant removal by nanostructured magnetite anchored in mesoporous silica

The presence of organic micropollutants in water bodies represents a threat to living organisms and ecosystems due to their toxicological effects and recalcitrance in conventional wastewater treatments. In this context, the application of heterogeneous photo-Fenton based on magnetite nanoparticles supported on mesoporous silica (SBA15) is proposed to carry out the non-specific degradation of the model compounds ibuprofen, carbamazepine, hormones, bisphenol A and the dye ProcionRed®. The operating conditions (i.e., pH, catalyst load and hydrogen peroxide concentration) were optimized by Response Surface Methodology (RSM). The paramagnetic properties of the nanocatalysts allowed their repeated use in sequential batch operations with catalyst losses below 1%. The feasibility of the process was demonstrated as removal rates above 90% after twelve accomplished after twelve consecutive cycles. In addition, the contributions of different reactive oxygen species, mainly •OH, were analyzed together with the formation of by-products, achieving total mineralization values of 15% on average.

Molybdenum disulfide co-catalysis boosting nanoscale zero-valent iron based Fenton-like process: Performance and mechanism

The conventional Fenton process has the drawbacks of low efficiency of Fe³⁺/Fe²⁺ conversion, low utilization of H₂O₂, and narrow range of pH. In this paper, molybdenum sulfide (MoS₂) was used as a co-catalyst to boost the nanoscale zero-valent iron (nZVI) based heterogeneous Fenton-like process for the degradation of Rhodamine B (RhB). The catalytic performance, influences of parameters, degradation mechanism, and toxicity of intermediates were explored. Compared with the conventional like-Fenton process, the existence of MoS₂ accelerated the decomposition of H₂O₂ and the RhB degradation rate constant of MoS₂/nZVI/H₂O₂ reached more than six times that of nZVI/H₂O₂. In addition, the effective pH range of MoS₂/nZVI/H₂O₂ was broadened to 9.0 with 84.9% of RhB being removed within 15 min. The co-catalytic system of MoS₂ and nZVI was stable and had high reusability according to the results of four consecutive runs. Quenching tests and electron paramagnetic resonance (EPR) demonstrated that hydroxyl radical (·OH), superoxide anions (·O₂^-), and singlet oxygen (¹O₂) were all involved in MoS₂/nZVI/H₂O₂. Compared with nZVI/H₂O₂ system, MoS₂ not only increased the corrosion of nZVI but also accelerated the conversion of Fe³⁺/Fe²⁺. ECOSAR analysis suggested that the overall acute and chronic toxicity of the degradation products decreased after treatment. Hence, this MoS₂ co-catalytic nZVI based Fenton-like process can be used as a promising alternative for the treatment of organic wastewater.

Response Surface Methodology for Optimization of Bisphenol A Degradation Using Fe3O4-Activated Persulfate

In this study, the degradation of bisphenol A (BPA) by a magnetite (Fe3O4)/persulfate (PS) system was investigated. The effects of magnetite dosage, PS concentration, BPA concentration, and pH on Fe3O4-activated PS in degrading BPA were investigated using single factor experiments. magnetite dosage, PS concentration, and pH were identified as factors in the response surface experimental protocol. Using Box-Behnken analysis, a quadratic model with a high correlation coefficient (0.9152) was obtained, which was accurate in predicting the experimental results. The optimal parameter conditions obtained by the response surface methodology (RSM) were [magnetite] = 0.3 g/L, [PS] = 0.26 mM, and pH = 4.9, under which the predicted BPA degradation rate was 59.54%, close to the real value.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

Green Synthesis of Magnetite-Based Catalysts for Solar-Assisted Catalytic Wet Peroxide Oxidation

A novel synthesis method under green philosophy for the preparation of some magnetite-based catalysts (MBCs) is presented. The synthesis was carried out in aqueous media (i.e., absence of organic solvents) at room temperature with recovery of excess reactants. Terephthalic acid (H2BDC) was used to drive the synthesis route towards magnetite. Accordingly, bare magnetite (Fe3O4) and some hybrid magnetite-carbon composites were prepared (Fe3O4-G, Fe3O4-GO, and Fe3O4-AC). Graphene (G), graphene oxide (GO), and activated carbon (AC) were used as starting carbon materials. The recovered H2BDC and the as-synthetized MBCs were fully characterized by XRD, FTIR, Raman spectroscopy, XPS, SQUID magnetometry, TGA-DTA-MS, elemental analysis, and N2-adsorption-desorption isotherms. The recovered H2BDC was of purity high enough to be reused in the synthesis of MBCs. All the catalysts obtained presented the typical crystalline phase of magnetite nanoparticles, moderate surface area (63–337 m2 g−1), and magnetic properties that allowed their easy separation from aqueous media by an external magnet (magnetization saturation = 25–80 emu g−1). The MBCs were tested in catalytic wet peroxide oxidation (CWPO) of an aqueous solution of metoprolol tartrate (MTP) under simulated solar radiation. The Fe3O4-AC materials showed the best catalytic performance among the prepared MBCs, with MTP and total organic carbon (TOC) removals higher than 90% and 20%, respectively, after 3 h of treatment. This catalyst was fairly successfully reused in nine consecutive runs, though minor loss of activity was observed, likely due to the accumulation of organic compounds on the porous structure of the activated carbon and/or partial oxidation of surface Fe2+ sites.