The efficient biomineralization and adsorption of cadmium (Cd2+) using secretory organo-biominerals (SOBs) produced by screened Alcaligenes faecalis K2

Phosphorus-rich biochar modified with Alcaligenes faecalis to promote U(VI) removal from wastewater: Interfacial adsorption behavior and mechanism

Phosphorus-rich biochar (PBC) has been extensively studied due to its significant adsorption effect on U(VI). However, the release of phosphorus from PBC into solution decreases its adsorption performance and reusability and causes phosphorus pollution of water. In this study, Alcaligenes faecalis (A. faecalis) was loaded on PBC to produce a novel biocomposite (A/PBC). After adsorption equilibrium, phosphorus released into solution from PBC was 2.32 mg/L, while it decreased to 0.34 mg/L from A/PBC (p < 0.05). The U(VI) removal ratio of A/PBC reached nearly 100%, which is 13.08% higher than that of PBC (p < 0.05), and it decreased only by 1.98% after 5 cycles. When preparing A/PBC, A. faecalis converted soluble phosphate into insoluble metaphosphate minerals and extracellular polymeric substances (EPS). And A. faecalis cells accumulated through these metabolites and formed biofilm attached to the PBC surface. The adsorption of metal cations on phosphate further contributed to phosphorus fixation in the biofilm. During U(VI) adsorption by A/PBC, A. faecalis synthesize EPS and metaphosphate minerals by using the internal components of PBC, thus increasing the abundance of acidic functional groups and promoting U(VI) adsorption. Hence, A/PBC can be a green and sustainable material for U(VI) removal from wastewater.

A Green Approach Used for Heavy Metals 'Phytoremediation' Via Invasive Plant Species to Mitigate Environmental Pollution: A Review

Heavy metals (HMs) normally occur in nature and are rapidly released into ecosystems by anthropogenic activities, leading to a series of threats to plant productivity as well as human health. Phytoremediation is a clean, eco-friendly, and cost-effective method for reducing soil toxicity, particularly in weedy plants (invasive plant species (IPS)). This method provides a favorable tool for HM hyperaccumulation using invasive plants. Improving the phytoremediation strategy requires a profound knowledge of HM uptake and translocation as well as the development of resistance or tolerance to HMs. This review describes a comprehensive mechanism of uptake and translocation of HMs and their subsequent detoxification with the IPS via phytoremediation. Additionally, the improvement of phytoremediation through advanced biotechnological strategies, including genetic engineering, nanoparticles, microorganisms, CRISPR-Cas9, and protein basis, is discussed. In summary, this appraisal will provide a new platform for the uptake, translocation, and detoxification of HMs via the phytoremediation process of the IPS.

Recent advancements in cadmium-microbe interactive relations and their application for environmental remediation: a mechanistic overview

The toxic and persistent nature of cadmium (Cd) in the environment has become a matter of concern with its drastic increase in the concentrations over past few decades. Among the various techniques, the microbial remediation has been accepted as an effective decontamination tool for environmental applications, which is sustainable over a period of time. The Cd decontamination potential of the microbes depends on various internal and external factors that play a crucial role in selection of the microbes for application in a particular environment. Thus, it is important to understand the role of these factors for optimal application of the microbes. This study provides an insight into the mechanisms involved between the microbes and the environmental Cd. The study also briefly reviews the mathematical models that have been used to predict the remediation potential of the microbes and the kinetics involved during the process. A critical analysis of the recent advancements in the techniques for use of bacteria, fungi, and algal cells to remove Cd has been also presented in the manuscript.

Catalyzing urea hydrolysis using two-step microbial-induced carbonate precipitation for copper immobilization: Perspective of pH regulation

Microbial induced carbonate precipitation (MICP) has recently applied to immobilize heavy metals toward preventing their threats to public health and sustainable development of surrounding environments. However, for copper metallurgy activities higher copper ion concentrations cause the ureolytic bacteria to lose their activity, leading to some difficulty in forming carbonate precipitation for copper immobilization (referred to also as “biomineralization”). A series test tube experiments were conducted in the present work to investigate the effects of bacterial inoculation and pH conditions on the copper immobilization efficiency. The numerical simulations mainly aimed to compare with the experimental results to verify its applicability. The copper immobilization efficiency was attained through azurite precipitation under pH in a 4–6 range, while due to Cu²⁺ migration and diffusion, it reduced to zero under pH below 4. In case pH fell within a 7–9 range, the immobilization efficiency was attained via malachite precipitation. The copper-ammonia complexes formation reduced the immobilization efficiency to zero. The reductions were attributed either to the low degree of urea hydrolysis or to inappropriate pH conditions. The findings shed light on the necessity of securing the urease activity and modifying pH conditions using the two-step biomineralization approach while applying the MICP technology to remedy copper-rich water bodies.

The removal of selenite and cadmium by immobilized biospheres: Efficiency, mechanisms and bacterial community

In this study, a complex bacterial consortium was enriched from a typical Pb-Zn mine area and immobilized by sodium alginate to form biospheres, which were used for treatment of selenite (Se(IV))- and cadmium (Cd(II))-containing wastewater without external carbon source. Batch experiments showed that the maximum Se(IV) removal efficiency was 92.36% under the optimal conditions of an initial pH of 5, dosage of 5 g/L, initial Se(IV) concentration of 7.9 mg/L and reaction time of 168 h. Subsequently, more than 99% of 11.2 mg/L Cd(II) was removed by the biospheres within 10 h. Physicochemical characterization showed that reduction and adsorption were the main mechanisms for Se(IV) and Cd(II) removal, respectively. During the removal process, selenium and CdSe nanoparticles were formed. Bacterial community analysis showed the dominant bacterial genera changed after treatment of Se(IV)- and Cd(II)-containing wastewater. Additionally, 16S rRNA gene function prediction results showed that amino acid transport, carbohydrate transport, ion transport and metabolism were the dominant gene functions. The present study provides a potential way for the biological treatment of Se(IV)- and Cd(II)-containing wastewater using immobilized biospheres without external carbon source in short-term.