Synthesis of porous 2D layered nickel oxide-reduced graphene oxide (NiO-rGO) hybrid composite for the efficient electrochemical detection of epinephrine in biological fluid

Portable electrochemical sensor for adrenaline detection using CoNi-MOF-based CS-PAM hydrogel

The development of a portable smartphone-based electrochemical sensor for analyzing adrenaline levels in real samples can make a great contribution to the research community worldwide. In order to achieve this goal, the key challenge is to build sensing interfaces with excellent electrocatalytic properties. In this work, microspherical bimetallic metal-organic frameworks (CoNi-MOF) consisting of nanoclusters were first synthesized using a hydrothermal method. On this basis, the catalytic activity of pure chitosan-polyacrylamide hydrogel (CS-PAM) was modulated by adding different amounts of CoNi-MOF during the in-situ synthesis of CS-PAM. Finally, a portable electrochemical detection system based on CS-PAM was established for the detection of adrenaline. A series of resulting composite hydrogels with a large specific surface area, abundant active sites, and unique network structure facilitate the enrichment and catalysis of adrenaline molecules. Under optimal conditions, the analytical platform constructed by using CoNi-MOF-based CS-PAM has the advantages of a wide detection range (0.5-10 and 10-2500 μM), a low detection limit (0.167 μM), and high sensitivity (0.182 and 0.133 μA·μM·cm-2). In addition, the sensor maintains selective detection of the target in the presence of many different types of interferences, and the current response is not significantly reduced even after 60 cycles of testing. We strongly believe that the designed smart portable sensing can realize the accurate determination of adrenaline in complex systems, and this study can provide new ideas for the research of MOFs-based hydrogels in electrochemical analysis.

Oatmeal-derived carbon loaded with Pt nanoparticles using a "two-fold benefit approach" for sensitive detection of the biomolecule adrenaline

In this study, we innovatively synthesized nitrogen-doped carbon microspheres (NCS) derived from oatmeal. By utilizing polyoxometalates (POM) as both reducing and linking agents, we achieved uniform loading of platinum nanoparticles (Pt NPs) onto the surface of the NCS. The composite nanoparticles constructed from Pt/polyoxometalate/nitrogen-doped carbon microspheres (Pt/POM/NCS) fully exploit the synergistic catalytic effect, demonstrating superior performance in adrenaline detection. The method has a linear range of 2.59 to 1109.59 μM, a detection limit as low as 0.25 μM (S/N = 3), and a sensitivity of 0.74 μA μM-1 cm-2. Additionally, it exhibits high stability and strong anti-interference ability. The recoveries in human serum were 98.51 % to 101.25 %.

Platinum-ruthenium-iron embedded in nitrogen-doped ordered mesoporous carbon for adrenaline electrochemical sensing study

A novel nitrogen-doped ordered mesoporous carbon (OMC) pore-embedded growth Pt-Ru-Fe nanoparticles (Pt1-Ru7.5-Fex@N-OMCs) composite was designed and synthesized for the first time. SBA-15 was used as a template, and dopamine was used as a carbon and nitrogen source and metal linking reagent. The oxidative self-polymerization reaction of dopamine was utilized to polymerize dopamine into two-dimensional ordered SBA-15 template pores. Iron porphyrin was introduced as an iron source at the same time as polymerization of dopamine, which was introduced inside and outside the pores using dopamine-metal linkage. Carbonization of polydopamine, nitrogen doping and iron nanoparticle formation were achieved by one-step calcination. Then the templates were etched to form Fex@N-OMCs, and finally the Pt1-Ru7.5-Fex@N-OMCs composites were stabilized by the successful introduction of platinum-ruthenium nanoparticles through the substitution reaction. The composite uniformly embeds the transition metal nanoparticles inside the OMC pores with high specific surface area, which limits the size of the metal nanoparticles inside the pores. At the same time, the metal nanoparticles are also loaded onto the surface of the OMCs, realizing the uniform loading of metal nanoparticles both inside and outside the pores. This enhances the active sites of the composite, promotes the mass transfer process inside and outside the pores, and greatly enhances the electrocatalytic performance of the catalyst. The material shows high electrocatalytic performance for adrenaline, which is characterized by a wide linear range, high sensitivity and low detection limit, and can realize the detection of actual samples.

Novel electrochemical ZnO/MnO2/rGO nanocomposite-based catalyst for simultaneous determination of hydroquinone and pyrocatechol

An innovative electrochemical sensing method is introduced for dihydroxy benzene (DHB) isomers, specifically hydroquinone (HQ) and pyrocatechol (PCC), employing a zinc-oxide/manganese-oxide/reduced-graphene-oxide (ZnO/MnO2/rGO) nanocomposite (NC) as an electrode modifier material. Comprehensive characterization confirmed well-dispersed ZnO/MnO2 nanoparticles on rGO sheets. Electrochemical analysis revealed the ZnO/MnO2/rGO-NC-based modified electrode possesses low electrical resistance (126.2 Ω), high electrocatalytic activity, and rapid electron transport, attributed to the synergies between ZnO, MnO2 and rGO. The modified electrode demonstrated exceptional electrochemical performance in terms of selectivity for the simultaneous detection of HQ and PCC. Differential pulse voltammetry studies validated the proposed sensor's ability to detect HQ and PCC within linear response ranges of 0.01-115 μM and 0.03-60.53 μM, with detection limits of 0.0055 µM and 0.0053 µM, respectively. Practical validation using diverse water samples showcased excellent percent recovery of HQ and PCC using the ZnO/MnO2/rGO-based electrochemical sensor, underscoring the sensor's potential for real-world applications in environmental monitoring.

A graphitized carbon@boron carbide-mediated laccase-based amperometric biosensor for epinephrine detection

The development of novel electron transfer mediator is important for laccase-based electrochemical biosensors. Here, graphitized carbon coated boron carbide (GC@B4C) was first used as the mediator to transfer electrons from laccase (Lac) to nickel foam (NF) electrode. The GC shell of GC@B4C particles was characterized and confirmed by HRTEM, XRD and Raman spectroscopy. The fabricated Lac/GC@B4C/NF electrode was applied for amperometric detection of epinephrine (EP). Detection results indicated Lac/GC@B4C/NF electrode has wide linear range (0.1 µM-2.6 mM), low detection limit (40 nM), high sensitivity (76.05 µA mM-1), strong anti-interference ability and favorable stability for EP detection. This work opened up the use of nonmetallic carbide as the mediator for enzyme-based electrochemical biosensors.

A nanoplatform-based aptasensor to electrochemically detect epinephrine produced by living cells

A novel aptasensor has been designed for quantitative monitoring of epinephrine (EP) based on cerium metal-organic framework (CeMOF) loaded gold nanoparticles (AuNPs). The aptamer, specific to EP, is immobilized on a flexible screen-printed electrode modified with AuNPs@CeMOF, enabling highly selective binding to the target biomolecule. Under optimized operational conditions, the peak currents using voltammetric detection measured at voltage of 83 mV (vs. Ag/AgCl) for epinephrine exhibit a linear increase within concentration in the range 1 pM-10 nM. Following this detection strategy, a boasted limit of detection of 0.3 pM was achieved, surpassing the sensitivity of most reported methods. The developed biosensor showcased exceptional performance in detection of EP in spiked serum sample, with remarkable recovery range of  95.8-113% and precision reflected by low relative standard deviation (RSD) ranging from 2.23 to 6.19%. These results indicate the potential utility of this biosensor as a valuable clinical diagnostic tool. Furthermore, in vitro experiments were carried out using the presented biosensor to monitor the release of epinephrine from PC12 cells upon extracellular stimulation with K+ ions.

Honeycomb-like nickel oxide-reduced graphene oxide based sensor for the electrochemical tracking of norepinephrine in neuronal cells

Highly sensitive and specific detection and monitoring of trace norepinephrine (NE) in biological fluids and neuronal cell lines is essential for the investigation of pathogenesis of certain neurological diseases. Herein, we constructed a novel electrochemical sensor for real-time monitoring of NE released by PC12 cells based on glassy carbon electrode (GCE) modified with honeycomb-like nickel oxide (NiO)-reduced graphene oxide (RGO) nanocomposite. The synthesized NiO, RGO and the NiO-RGO nanocomposite were characterized using X-ray diffraction spectrogram (XRD), Raman spectroscopy and scanning electron microscopy (SEM). The porous three-dimensional honeycomb-like structure of NiO and high charge transfer kinetics of RGO endowed the nanocomposite with excellent electrocatalytic activity, large surface area and good conductivity. The developed sensor exhibited superior sensitivity and specificity towards NE in a wide linear range from 20 nM to 14 μM and 14 μM-80 μM, with a low detection limit of 5 nM. The performances of the sensor in terms of excellent biocompatibility and high sensitivity allow it to be successfully employed in the tracking of NE release from PC12 cells under the stimulation of K⁺, providing an effective strategy for the real-time monitoring of cellular NE.

Dynamics of reduced graphene oxide: synthesis and structural models

Technological advancements are leading to an upsurge in demand for functional materials that satisfy several of humankind's needs. In addition to this, the current global drive is to develop materials with high efficacy in intended applications whilst practising green chemistry principles to ensure sustainability. Carbon-based materials, such as reduced graphene oxide (RGO), in particular, can possibly meet this criterion because they can be derived from waste biomass (a renewable material), possibly synthesised at low temperatures without the use of hazardous chemicals, and are biodegradable (owing to their organic nature), among other characteristics. Additionally, RGO as a carbon-based material is gaining momentum in several applications due to its lightweight, nontoxicity, excellent flexibility, tuneable band gap (from reduction), higher electrical conductivity (relative to graphene oxide, GO), low cost (owing to the natural abundance of carbon), and potentially facile and scalable synthesis protocols. Despite these attributes, the possible structures of RGO are still numerous with notable critical variations and the synthesis procedures have been dynamic. Herein, we summarize the highlights from the historical breakthroughs in understanding the structure of RGO (from the perspective of GO) and the recent state-of-the-art synthesis protocols, covering the period from 2020 to 2023. These are key aspects in the realisation of the full potential of RGO materials through the tailoring of physicochemical properties and reproducibility. The reviewed work highlights the merits and prospects of the physicochemical properties of RGO toward achieving sustainable, environmentally friendly, low-cost, and high-performing materials at a large scale for use in functional devices/processes to pave the way for commercialisation. This can drive the sustainability and commercial viability aspects of RGO as a material.

Advanced Nanomaterials-Based Electrochemical Biosensors for Catecholamines Detection: Challenges and Trends

Catecholamines, including dopamine, epinephrine, and norepinephrine, are considered one of the most crucial subgroups of neurotransmitters in the central nervous system (CNS), in which they act at the brain's highest levels of mental function and play key roles in neurological disorders. Accordingly, the analysis of such catecholamines in biological samples has shown a great interest in clinical and pharmaceutical importance toward the early diagnosis of neurological diseases such as Epilepsy, Parkinson, and Alzheimer diseases. As promising routes for the real-time monitoring of catecholamine neurotransmitters, optical and electrochemical biosensors have been widely adopted and perceived as a dramatically accelerating development in the last decade. Therefore, this review aims to provide a comprehensive overview on the recent advances and main challenges in catecholamines biosensors. Particular emphasis is given to electrochemical biosensors, reviewing their sensing mechanism and the unique characteristics brought by the emergence of nanotechnology. Based on specific biosensors' performance metrics, multiple perspectives on the therapeutic use of nanomaterial for catecholamines analysis and future development trends are also summarized.

Zinc pyrovanadate nanorods with excellent peroxidase-like activity at physiological pH for the colorimetric assay of H2O2 and epinephrine

Exploring highly active peroxidase mimics at physiological pH is important for the construction of efficient and convenient colorimetric sensing platforms for detecting small biomolecules. In this work, prepared zinc pyrovanadate (Zn₃V₂O₇(OH)₂·2H₂O) nanorods exhibit excellent peroxidase-like activity, which is verified by the fast oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) into a blue product (oxTMB) by H₂O₂ at physiological pH (pH = 7) in 2 min. In addition, the catalytic behaviors of Zn₃V₂O₇(OH)₂·2H₂O as a peroxidase-like nanozyme conform to the Michaelis-Menten equation. Scavenger experiments prove that the catalytic activity of Zn₃V₂O₇(OH)₂·2H₂O is ascribed to ˙O₂^- radicals generated in the process of catalysis. Based on the peroxidase-like activity of the Zn₃V₂O₇(OH)₂·2H₂O nanozyme, a fast and convenient colorimetric sensor has been constructed to detect H₂O₂ and epinephrine (EP) under physiological pH. The detection limit of EP is as low as 0.26 μM. In addition, the feasibility of the proposed sensor has been validated to detect H₂O₂ in milk and EP in serum.