Hexavalent chromium removal from aqueous solutions using biogenic iron nanoparticles: Kinetics and equilibrium study

Novel sulfonic groups grafted sugarcane bagasse biosorbent for efficient removal of cationic dyes from wastewater

In this research, we reported the synthesis of effective sulphonated sugarcane bagasse (SCB@SA) biosorbent based on agriculture waste materials via a simple diazotization strategy for the removal of methylene blue (MB) and Bismarck Brown R(BB) dyes from waste water samples. First, the sugarcane bagasse (SCB) waste was collected, grinded, and sieved to obtain the desired size. Secondly, the SCB powder is modified with sulfanilinic acid (SA) via the formation of its diazonium salt to introduce sulfonic groups on the SCB surface. Different advanced techniques were applied to characterize the prepared materials before and after the adsorption process viz. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS) and Thermogravimetric analysis (TGA). Different parameters affecting the adsorption process of both MB and BB were studied. Because of the higher correlation coefficient (R2 ≥ 0.999) and lower error functions, the equilibrium MB and BB adsorption isotherms for a single-dye system fit Langmuir with maximum adsorption capacity reaching to 127.48 and 166.75 mg/g for MB and BB, respectively. Moreover, the RL values obtained for both dyes lie between 0 and 1, indicating that MB and BB adsorption by SCB@SA is a favorable process. Besides, the error functions' values of the pseudo-2nd-order are significantly lower than those of the pseudo-1st-order, implying that the adsorption MB and BB onto SCB@SA biosorbent fitted the pseudo-2nd-order kinetic model in a chemosorption manner. In the thermodynamic studies, the adsorption process is spontaneous, exothermic, and has less randomness. In addition, the SCB@SA biosorbent could be reused in five cycles maintaining on suitable adsorption efficiency. Finally, the MB and BB dyes could be adsorbed on the SCB@SA biosorbent via three mechanisms including π-π stacking, columbic attraction, and hydrogen bonding.

Nanotechnology Approaches for the Remediation of Agricultural Polluted Soils

Soil pollution from various anthropogenic and natural activities poses a significant threat to the environment and human health. This study explored the sources and types of soil pollution and emphasized the need for innovative remediation approaches. Nanotechnology, including the use of nanoparticles, is a promising approach for remediation. Diverse types of nanomaterials, including nanobiosorbents and nanobiosurfactants, have shown great potential in soil remediation processes. Nanotechnology approaches to soil pollution remediation are multifaceted. Reduction reactions and immobilization techniques demonstrate the versatility of nanomaterials in mitigating soil pollution. Nanomicrobial-based bioremediation further enhances the efficiency of pollutant degradation in agricultural soils. A literature-based screening was conducted using different search engines, including PubMed, Web of Science, and Google Scholar, from 2010 to 2023. Keywords such as "soil pollution, nanotechnology, nanoremediation, heavy metal remediation, soil remediation" and combinations of these were used. The remediation of heavy metals using nanotechnology has demonstrated promising results and offers an eco-friendly and sustainable solution to address this critical issue. Nanobioremediation is a robust strategy for combatting organic contamination in soils, including pesticides and herbicides. The use of nanophytoremediation, in which nanomaterials assist plants in extracting and detoxifying pollutants, represents a cutting-edge and environmentally friendly approach for tackling soil pollution.

Efficient adsorption of Cr (VI) onto hematite nanoparticles: ANN, ANFIS modelling, isotherm, kinetic, thermodynamic studies and mechanistic insights

Hematite nanoparticles (AF-Fe2O3NPs) were prepared through a simple method utilizing Acacia falcata leaf extract in this investigation. The nanoparticles were extensively characterized to understand their specific properties. FESEM images revealed agglomerated surface morphology, while EDS confirmed the existence of elemental components, including Fe, O, and C. The mesoporous nature of AF-Fe2O3NPs with a pore diameter of 3.77 nm was determined through BET studies. XRD analysis indicated the crystallinity, with lattice parameters characteristic of hematite nanoparticles (a = 0.504 nm and c = 1.381 nm). Superparamagnetic property of the AF-Fe2O3NPs was affirmed from the saturation magnetization (2.98 emu/g) without any hysteresis. Subsequently, AF-Fe2O3NPs were used as adsorbent for the removal of Cr (VI) from aqueous solution. The experimental data were subjected to machine learning (ML) models, specifically ANN and ANFIS, to predict Cr (VI) removal. Both ML models exhibited excellent predictive capabilities, with high R2 values (>0.99) and low error indices such as MSE, RMSE, and MAE. Furthermore, comprehensive kinetic, isotherm, and thermodynamic studies were conducted to gain insights into the behavior and sorption mechanisms of Cr (VI). The Hill model, a statistical physics model, demonstrated an outstanding fit compared to conventional isotherms. It revealed a saturation adsorption potential of 12.91 mg/g at pH 2, 1.5 g/L dose, and a temperature of 30 °C, corroborating physisorption as the dominant mechanism. XPS results confirmed Cr (VI) reduction to Cr (III) through the appearance of specific peaks at 577.18 and 587.08 eV. Thermodynamic investigations established the endothermicity and spontaneity of the adsorption. In summary, the hematite nanoparticles synthesized in this study exhibit promising potential to remove Cr (VI) from aqueous streams, making them a viable option for water treatment applications.

Chromium removal from aqueous solution using bimetallic Bi0/Cu0-based nanocomposite biochar

Chromium (Cr), due to its greater contamination in aquifers and distinct eco-toxic impacts, is of greater environmental concern. This study aimed to synthesize nanocomposites of almond shells biochar (BC) with zerovalent bismuth and/or copper (Bi0/BC, Cu0/BC, and Bi0-Cu0/BC) for the removal of Cr from aqueous solution. The synthesized nanocomposites were investigated using various characterization techniques such as XRD, FTIR spectroscopy, SEM, and EDX. The Cr removal potential by the nanocomposites was explored under different Cr concentrations (25-100 mg/L), adsorbent doses (0.5-2.0 g/L), solution pH (2-8), and contact time (10-160 min). The above-mentioned advanced techniques verified successful formation of Bi0/Cu0 and their composite with BC. The synthesized nanocomposites were highly effective in the removal of Cr. The Bi0-Cu0/BC nano-biocomposites showed higher Cr removal efficiency (92%) compared to Cu0/BC (85%), Bi0/BC (76%), and BC (67%). The prepared nanocomposites led to effective Cr removal at lower Cr concentrations (25 mg/L) and acidic pH (4.0). The Cr solubility changes with pH, resulting in different degrees of Cr removal by Bi0-Cu0/BC, with Cr(VI) being more soluble and easier to adsorb at low pH levels and Cr(III) being less soluble and more difficult to adsorb at high pH levels. The experimental Cr adsorption well fitted with the Freundlich adsorption isotherm model (R2 > 0.99) and pseudo-second-order kinetic model. Among the prepared nanocomposites, the Bi0-Cu0/BC showed greater stability and reusability. It was established that the as-synthesized Bi0-Cu0/BC nano-biocomposite showed excellent adsorption potential for practical Cr removal from contaminated water.

Ecotoxicological insights: Effects of pesticides on ionic metabolism regulation in freshwater catfish, Mystus keletius

Fish maintain their body fluid ionic and osmotic homeostasis using sophisticated iono-/osmoregulation mechanisms through gills ionocytes. Pesticide-induced ionic imbalance in fish has been recognized as a valuable tool to determine its toxic effects. Acute exposure to synthetic and organo-chemical pesticides on the regulation of ionic (Na+, Ca2+, P) metabolism in freshwater catfish Mystus keletius was evaluated. Fish were exposed to sub-lethal concentrations (mg/l) of selected pesticide for a period of 7, 14, 21 and 28 days. Results indicated that chemical pesticides - Impala and Ekalux - evoked adverse toxic effects on selected tissues compared to organo-chemical pesticide tested. Statistical analysis of the summative data using two-way ANOVA was significant (p-value<0.001). Variations in the cellular parameters analysed were attributed to the physiological acclimatization of fish to the pesticide exposed. Based on the results it is concluded that organic pesticides may be preferred for rice field application considering safety aspects.

Synthesis of iron oxide nanoparticles mediated by Camellia sinensis var. Assamica for Cr(VI) adsorption and detoxification

Environment-benign synthesis of nanoparticles (NPs) are of great importance. Plant-based polyphenols (PPs) are electron donor analytes for the synthesis of metal and metal oxide NPs. This work produced and investigated iron oxide nanoparticles (IONPs) from PPs of tea leaves of Camellia sinensis var. assamica for Cr(VI) removal. The conditions for IONPs synthesis were using RSM CCD and found to be optimum at a time of 48 min, temperature of 26 °C, and iron precursors/leaves extract ratio (v/v) of 0.36. Further, these synthesized IONPs at a dosage of 0.75 g/L, temperature of 25 °C, and pH 2 achieved a maximum of 96% Cr(VI) removal from 40 mg/L of Cr(VI) concentration. The exothermic adsorption process followed the pseudo-second-order model, and Langmuir isotherm estimated a remarkable maximum adsorption capacity (Q_m) of 1272 mg g^-1 of IONPs. The proposed mechanistic for Cr(VI) removal and detoxification involved adsorption and its reduction to Cr(III), followed by Cr(III)/Fe(III) co-precipitation.

Enhanced photodegradation of methylene blue from aqueous solution using Al-doped ZnS nanoparticles

The post-transition semiconducting material of pure zinc sulfide (ZnS) and various concentrations of aluminum (Al) (2.5 wt%, 5.0% wt, 7.5 wt%, and 10% calcined at 200 °C) doped ZnS nanoparticles (NPs) were synthesized by sol-gel procedure. The crystal-like nature and phase structure of the product were examined by powder XRD analysis. This analysis shows that the pure ZnS nanoparticle does not form any secondary phase. The functional group of synthesized materials was analyzed by FTIR examination. The energy gap of the materials is calculated using electro-optic analysis and the Kubelka-Munk equation varies from 3.04 nm to 3.63 nm. The photoluminescence studies show the wide emissions (blue to green) for pure ZnS and Al-doped ZnS nanomaterials. The SEM images show the spherical structure and the agglomerated nanostructures. The presence of Zn, S, and Al are confirmed by EDAX spectra. From HR-TEM studies, pure ZnS and Al-doped ZnS nanoparticles exhibit uniform particle sizes. The rate of degradation was observed using MB dye. MB dye has maximum wavelength (λ_max) of 664 nm. The dye degradation efficiency was improved as the dye ratio increased. Photocatalytic activities studies show the intensity of photocatalytic activities decreased for the maximum time interval. Doping of Al in ZnS boosts the photocatalytic activity. Hence, Al-doped ZnS appears to be better decomposing MB dye when exposed to visible light.