Designing a novel poly (methyl vinyl ether maleic anhydride) based polymeric membrane with enhanced antifouling performance for removal of pentachlorophenol from aqueous solution

Solving the fouling mechanisms in composite membranes for water purification: An advance approach

With the increasing population worldwide more wastewater is created by human activities and discharged into the waterbodies. This is causing the contamination of aquatic bodies, thus disturbing the marine ecosystems. The rising population is also posing a challenge to meet the demands of fresh drinking water in the water-scarce regions of the world, where drinking water is made available to people by desalination process. The fouling of composite membranes remains a major challenge in water desalination. In this innovative study, we present a novel probabilistic approach to analyse and anticipate the predominant fouling mechanisms in the filtration process. Our establishment of a robust theoretical framework hinges upon the utilization of both the geometric law and the Hermia model, elucidating the concept of resistance in series (RIS). By manipulating the transmembrane pressure, we demonstrate effective management of permeate flux rate and overall product quality. Our investigations reveal a decrease in permeate flux in three distinct phases over time, with the final stage marked by a significant reduction due to the accumulation of a denser cake layer. Additionally, an increase in transmembrane pressure leads to a correlative rise in permeate flux, while also exerting negative effects such as membrane ruptures. Our study highlights the minimal immediate impact of the intermediate blocking mechanism (n = 1) on permeate flux, necessitating continuous monitoring for potential long-term effects. Additionally, we note a reduced membrane selectivity across all three fouling types (n = 0, n = 1.5, n = 2). Ultimately, our findings indicate that the membrane undergoes complete fouling with a probability of P = 0.9 in the presence of all three fouling mechanisms. This situation renders the membrane unable to produce water at its previous flow rate, resulting in a significant reduction in the desalination plant's productivity. I have demonstrated that higher pressure values notably correlate with increased permeate flux across all four membrane types. This correlation highlights the significant role of TMP in enhancing the production rate of purified water or desired substances through membrane filtration systems. Our innovative approach opens new perspectives for water desalination management and optimization, providing crucial insights into fouling mechanisms and proposing potential strategies to address associated challenges.

Thin-film nanocomposite membranes for efficient removal of emerging pharmaceutical organic contaminants from water

Membranes are receiving significant attention to remove emerging organic micropollutants (OMPs) from wastewater and natural water sources. Herein, we report the facile preparation of a novel thin-film nanocomposite (TFN) membrane with high permeability and efficient removal of OMPs. ZnO nanoparticles were first synthesized using the co-precipitation method and functionalized with N1-(3-Trimethoxysilylpropyl)diethylenetriamine to make the surface rich with amine groups and then synthesized nanomaterials were covalently cross-linked into the active layer during the interfacial polymerization (IP) process. The performance of the membranes containing the cross-linked ZnO was significantly better than the non-cross-linked ZnO NPs containing membranes. Adding multiple hydrophilic groups and entities on the surface significantly decreased the contact angle (from ∼60° to 20°). SEM images confirmed the uniform presence and homogeneous distribution of the functionalized NPs throughout the entire membrane surface. Zeta potential measurements showed the modified membranes have a lower negative charge than the pristine membranes. Filtration studies revealed a significant increase in permeability ascribed to the creation of nanochannels in the membrane's active layer. The modified membranes outperformed commercial NF membranes in removing four common OMPs with rejection efficiencies of ∼30%, 64%, 60%, and 70% for Sulfamethoxazole, Amitriptyline, Omeprazole, and Loperamide HCl, respectively. The higher removal efficiency was attributed to the weakened hydrophobic interactions due to the presence of hydrophilic moieties and a stronger size exclusion effect. Moreover, the modified membranes showed high resistance to bacterial adhesion in static conditions.

An Overview of Photocatalytic Membrane Degradation Development

Environmental pollution has become a worldwide issue. Rapid industrial and agricultural practices have increased organic contaminants in water supplies. Hence, many strategies have been developed to address this concern. In order to supply clean water for various applications, high-performance treatment technology is required to effectively remove organic and inorganic contaminants. Utilizing photocatalytic membrane reactors (PMRs) has shown promise as a viable alternative process in the water and wastewater industry due to its efficiency, low cost, simplicity, and low environmental impact. PMRs are commonly categorized into two main categories: those with the photocatalyst suspended in solution and those with the photocatalyst immobilized in/on a membrane. Herein, the working and fouling mechanisms in PMRs membranes are investigated; the interplay of fouling and photocatalytic activity and the development of fouling prevention strategies are elucidated; and the significance of photocatalysis in membrane fouling mechanisms such as pore plugging and cake layering is thoroughly explored.

Laccase-immobilized on superparamagnetic iron oxide nanoparticles incorporated polymeric ultrafiltration membrane for the removal of toxic pentachlorophenol

A biocatalytic membrane offers an ideal alternative to the conventional treatment process for the removal of toxic pentachlorophenol (PCP). The limelight of the study is to utilize superparamagnetic iron oxide nanoparticles (SPIONs) incorporated (poly (methyl vinyl ether-alt-maleic acid) (PMVEAMA) and poly (ether - ether) sulfone (PEES)) membrane for immobilization of laccase and its application towards the removal of PCP. In regard to immobilization of Tramates versicolor laccase onto membranes, 5 mM glutaraldehyde with 10 h cross-linking time was employed, yielding 76.92% and 77.96% activity recovery for PEES/PMVEAMA/La and PEES/PMVEAMA/SPIONs/Lac, respectively. In the context of kinetics and stability studies, the immobilized laccase on PEES/PMVEAMA/Lac membrane outperforms the free and PEES/PMVEAMA laccases. At pH 7.0, the free enzyme loses half of its activity, while the immobilized laccases maintained more than 87% of their initial activity even after 480 min. With regard to PCP removal, the removal efficiency of immobilized laccase on the membrane was more than free enzyme. With 100 ppm of PCP, immobilized laccase on PEES/PMVEAMA/SPIONs membrane at pH 4.0 and 50 °C had a removal efficacy of 61.65% in 24 h. Furthermore, to perk up the removal of PCP, the laccase-aided system with mediators was investigated. Amongst, veratryl alcohol displayed 71.04% of PCP removal using immobilized laccase. The reusability of the laccase heightened after immobilization on PEES/PMVEAMA/SPIONs portraying 62.44% of the residual activity with 39.4% of PCP removal even after five cycles. The current investigation reveals the efficacy of the mediator-aided PEES/PMVEAMA/lac membrane system towards removing PCP from the aqueous solution, which can also be proposed for a membrane bioreactor.

Porous Polymers Based on 9,10-Bis(methacryloyloxymethyl)anthracene-Towards Synthesis and Characterization

Porous materials can be found in numerous essential applications. They are of particular interest when, in addition to their porosity, they have other advantageous properties such as thermal stability or chemical diversity. The main aim of this study was to synthesize the porous copolymers of 9,10-bis(methacryloyloxymethyl)anthracene (BMA) with three different co-monomers divinylbenzene (DVB), ethylene glycol dimethacrylate (EGDMA) and trimethylpropane trimethacrylate (TRIM). They were synthesized via suspension polymerization using chlorobenzene and toluene served as porogenic solvents. For the characterization of the synthesized copolymers ATR-FTIR spectroscopy, a low-temperature nitrogen adsorption-desorption method, thermogravimetry, scanning electron microscopy, inverse gas chromatography and size distribution analysis were successfully employed. It was found that depending on the used co-monomer and the type of porogen regular polymeric microspheres with a specific surface area in the range of 134-472 m²/g can be effectively synthesized. The presence of miscellaneous functional groups promotes divergent types of interactions Moreover, all of the copolymers show a good thermal stability up to 307 °C. What is important, thanks to application of anthracene derivatives as the functional monomer, the synthesized materials show fluorescence under UV radiation. The obtained microspheres can be used in various adsorption techniques as well as precursor for thermally resistant fluorescent sensors.

Anaerobic Membrane Bioreactor (AnMBR) for the Removal of Dyes from Water and Wastewater: Progress, Challenges, and Future Perspectives

The presence of dyes in aquatic environments can have harmful effects on aquatic life, including inhibiting photosynthesis, decreasing dissolved oxygen levels, and altering the behavior and reproductive patterns of aquatic organisms. In the initial phase of this review study, our aim was to examine the categories and properties of dyes as well as the impact of their toxicity on aquatic environments. Azo, phthalocyanine, and xanthene are among the most frequently utilized dyes, almost 70–80% of used dyes, in industrial processes and have been identified as some of the most commonly occurring dyes in water bodies. Apart from that, the toxicity effects of dyes on aquatic ecosystems were discussed. Toxicity testing relies heavily on two key measures: the LC50 (half-lethal concentration) and EC50 (half-maximal effective concentration). In a recent study, microalgae exposed to Congo Red displayed a minimum EC50 of 4.8 mg/L, while fish exposed to Disperse Yellow 7 exhibited a minimum LC50 of 0.01 mg/L. Anaerobic membrane bioreactors (AnMBRs) are a promising method for removing dyes from water bodies. In the second stage of the study, the effectiveness of different AnMBRs in removing dyes was evaluated. Hybrid AnMBRs and AnMBRs with innovative designs have shown the capacity to eliminate dyes completely, reaching up to 100%. Proteobacteria, Firmicutes, and Bacteroidetes were found to be the dominant bacterial phyla in AnMBRs applied for dye treatment. However, fouling has been identified as a significant drawback of AnMBRs, and innovative designs and techniques are required to address this issue in the future.