Microbial degradation as a powerful weapon in the removal of sulfonylurea herbicides

Sustainable agricultural practices influence s-metolachlor, foramsulfuron and thiencarbazone-methyl degradation and their metabolites formation

The effect of sustainable agricultural practices, such as mulching or the application of straw residues as an organic amendment, on the degradation, dissipation and persistence in the soil of S-metolachlor (SMOC), foramsulfuron (FORAM) and thiencarbazone-methyl (TCM) is still unclear. The objective here was to conduct a laboratory experiment to evaluate the impact of milled wheat straw (WS) simulating its individual use as mulch or applied as an organic amendment to two agricultural soils: unamended and WS-amended soils on the degradation kinetics of the herbicides SMOC, FORAM and TCM, and on the formation of their major metabolites at two incubation temperatures (14 °C and 24 °C). The degradation rate of SMOC on WS was 6.9-16.7 times faster than that observed for FORAM and TCM at both temperatures. The half-life (DT50) values were 1.1-10.6 times lower for FORAM than for SMOC and TCM in the unamended and WS-amended soils at 14 °C and 24 °C. The application of WS to soils increased the DT50 values from 1.1 to 11.2 times for all the herbicides at both incubation temperatures due to their higher adsorption and lower bioavailability. The herbicides recorded a faster degradation at 24 °C (1.2-3.9 times) than at 14 °C, according to Q10 values >1. SMOC metabolites were more persistent in WS-amended soils than in unamended ones, in agreement with the DT50 values recorded for the parent compound. The results indicate that the effect of the mulch applied to soils as an organic amendment was different depending on the herbicide and incubation temperature. The outcomes of this research can give key suggestions for reducing the effects of residual herbicides following sustainable agricultural practices by avoiding soil and groundwater contamination, which is one of the challenges involved in the application of chemical inputs.

3D magnetic flower-spherical Fe2O3-NiO derived from NiFe-layered double hydroxides for the efficient removal of Bensulfuron methyl: Morphological control and bimetallic synergy

Three-dimensional (3D) magnetic flower-spherical Fe2O3-NiO derived from NiFe-layered double hydroxides (NiFe-LDHs) was fabricated through urea hydrothermal and calcination methods. The as-prepared materials were applied to activate PMS to degrade one of herbicide named Bensulfuron methyl (BSM). Fe2O3-NiO-1 demonstrated the highest catalytic activity and the lowest ions leaching by comparing the performance of LDHs and derivative bimetallic oxide synthesized by co-precipitation method, urea hydrothermal method and direct calcination method. Based on the results of SEM, BET and CV, the high catalytic activity of Fe2O3-NiO-1 originated from 3D morphology, lager specific area and pore size and faster electron transfer capability. The factors influencing the degradation performance were investigated and 0.1 g·L-1 Fe2O3-NiO could effectively activate PMS (1 mmol·L-1) to completely remove 10 mg·L-1 BSM within 30 min at pH 7.0. In Fe2O3-NiO/PMS system, OH, SO4- and 1O2 were produced and contributed to the BSM removal according to the results of EPR and quenching experiments. In order to expand its application range, Fe2O3-NiO/PMS system was used to degrade aniline (AN), sulfamethoxazole (SMZ), phenacetin (PNT), bisphenol A (BPA) and 2,4,6-triclofen (2,4,6-TCP) and the results showed the degradation efficiency could reach 90 % or more. Additionally, the application of catalysts in different actual water samples and the ability of reuse were tested. Based on the strategies of bimetallic synergy and morphology control, Fe-based bimetallic oxides with 3D morphology were developed in this study, which could effectively enhance the catalytic activity and inhibit the dissolution of metal ions, providing the design ideas for the construction of efficient catalysts and the removal of complex organic pollutants.

Molecular Mechanism of GmSNE3 Ubiquitin Ligase-Mediated Inhibition of Soybean Nodulation by Halosulfuron Methyl

In this study, the role of E3 ubiquitin ligase GmSNE3 in halosulfuron methyl (HSM) inhibiting soybean nodulation was investigated. GmSNE3 was strongly induced by HSM stress, and the overexpression of GmSNE3 significantly reduced the number of soybean nodules. Further investigation found that GmSNE3 could interact with a nodulation signaling pathway 1 protein (GmNSP1a) and GmSNE3 could mediate the degradation of GmNSP1a. Importantly, GmSNE3-mediated degradation of GmNSP1a could be promoted by HSM stress. Moreover, HSM stress and the overexpression of GmSNE3 resulted in a substantial decrease in the expression of the downstream target genes of GmNSP1a. These results revealed that HSM promotes the ubiquitin-mediated degradation of GmNSP1a by inducing GmSNE3, thereby inhibiting the regulatory effect of GmNSP1a on its downstream target genes and ultimately leading to a reduction in nodulation. Our findings will promote a better understanding of the toxic mechanism of herbicides on the symbiotic nodulation between legumes and rhizobia.

Cations impact the biodegradation of iodosulfuron-methyl herbicidal ionic liquids by fungi

In the framework of this study, six fungal isolates which demonstrated a high capability for biodegrading iodosulphuron-methyl sodium as well as herbicidal ionic liquids based on this herbicide were isolated from different soil samples. The isolates were identified based on the ITS region, whereas biodegradation residues were determined based on LC-MS/MS. Depending on the isolate, the half-lives values of the biodegraded herbicide or herbicidal ionic liquid ranged significantly from just 1.25 days to more than 40 days. The research findings unveiled that the structure of cations is a central limiting factor affecting fungal growth and herbicide transformation in case of ionic liquids. The length of the alkyl chain has been identified as the primary driver of herbicide toxicity, emphasizing the importance of structural factors in herbicide design. In cases when dodecyl(2-hydroxyethyl)dimethyl cation was used, its biodegradation ranged from 0 to approx. 20% and the biodegradability of the iodosulfuron-methyl was notably limited for the majority of the studied isolates. This knowledge provides guidance for development and selection of herbicides with reduced environmental impact. This study highlights the ecological importance of soil fungi, their potential role in herbicide biodegradation, the influence of cations on fungal growth and herbicide transformation, and the structural factors governing herbicide toxicity. Further research in these areas may lead to more efficient and environmentally friendly approaches to herbicide management.

Effect of Plant Growth-Promoting Bacteria on Antioxidant Status, Acetolactate Synthase Activity, and Growth of Common Wheat and Canola Exposed to Metsulfuron-Methyl

Metsulfuron-methyl, a widely used herbicide, could cause damage to the sensitive plants in crop-rotation systems at extremely low levels in the soil. The potential of plant growth-promoting bacteria (PGPB) for enhancing the resistance of plants against herbicide stress has been discovered recently. Therefore, it is poorly understood how physiological processes occur in plants, while PGPB reduce the phytotoxicity of herbicides for agricultural crops. In greenhouse studies, the effect of strains Pseudomonas protegens DA1.2 and Pseudomonas chlororaphis 4CH on oxidative damage, acetolactate synthase (ALS), enzymatic and non-enzymatic antioxidants in canola (Brassica napus L.), and wheat (Triticum aestivum L.) were investigated under two levels (0.05 and 0.25 mg∙kg-1) of metsulfuron-methyl using spectrophotometric assays. The inoculation of herbicide-exposed wheat with bacteria significantly increased the shoots fresh weight (24-28%), amount of glutathione GSH (60-73%), and flavonoids (5-14%), as well as activity of ascorbate peroxidase (129-140%), superoxide dismutase SOD (35-49%), and ALS (50-57%). Bacterial treatment stimulated the activity of SOD (37-94%), ALS (65-73%), glutathione reductase (19-20%), and the accumulation of GSH (61-261%), flavonoids (17-22%), and shoots weight (27-33%) in herbicide-exposed canola. Simultaneous inoculation prevented lipid peroxidation induced by metsulfuron-methyl in sensitive plants. Based on the findings, it is possible that the protective role of bacterial strains against metsulfuron-metil is linked to antioxidant system activation.

Biodegradation of Imazethapyr by Bacterial Strain IM9601 Isolated from Agricultural Soil

The widespread utilization of the herbicide imazethapyr presents significant challenges to crop rotation and results in detrimental soil degradation issues. Bacterial biodegradation has emerged as a promising and eco-friendly approach for mitigating pesticide residues contamination in the environment. In this study, a novel bacterium, identified as Brevibacterium sp. IM9601, was isolated and characterized based on morphological, physiological, and biochemical characteristics, as well as 16S rRNA gene sequence. This strain exhibited the ability to utilize imazethapyr as its sole carbon source for growth. Response surface methodology (RSM) was applied to optimize the degradation conditions. The most favorable conditions were determined to be a temperature of 27 °C, pH of 6.0, and an initial inoculum with a final OD600 of 0.15. Under these optimized condition, bacterial strain IM9601 exhibited substantial imazethapyr degradation, with removal rates of 90.08 and 87.05% for initial imazethapyr concentrations of 50 and 100 mg L-1, respectively, achieved within a 5-day incubation period. This investigation highlights imazethapyr-degrading capabilities of the Brevibacterium genus bacterial strain IM9601, marking it as a potentially novel and effective solution for addressing the environmental pollution resulting from the usage of imazethapyr. The study contributes to the growing body of research on bioremediation approaches, offering a sustainable and environmentally friendly method for mitigating the adverse impacts of herbicide contamination in agricultural settings.

Genomic Insights into the Microbial Agent Streptomyces albidoflavus MGMM6 for Various Biotechnology Applications

Microbial biotechnology plays a crucial role in improving industrial processes, particularly in the production of compounds with diverse applications. In this study, we used bioinformatic approaches to analyze the genomic architecture of Streptomyces albidoflavus MGMM6 and identify genes involved in various metabolic pathways that have significant biotechnological potential. Genome mining revealed that MGMM6 consists of a linear chromosome of 6,932,303 bp, with a high G+C content of 73.5%, lacking any plasmid contigs. Among the annotated genes, several are predicted to encode enzymes such as dye peroxidase, aromatic ring-opening dioxygenase, multicopper oxidase, cytochrome P450 monooxygenase, and aromatic ring hydroxylating dioxygenases which are responsible for the biodegradation of numerous endogenous and xenobiotic pollutants. In addition, we identified genes associated with heavy metal resistance, such as arsenic, cadmium, mercury, chromium, tellurium, antimony, and bismuth, suggesting the potential of MGMM6 for environmental remediation purposes. The analysis of secondary metabolites revealed the presence of multiple biosynthesis gene clusters responsible for producing compounds with potent antimicrobial and metal-chelating activities. Furthermore, laboratory tests conducted under controlled conditions demonstrated the effectiveness of MGMM6 in inhibiting phytopathogenic microbes, decolorizing and degrading aromatic triphenylmethane dyes, particularly Blue Brilliant G250, from wastewater by up to 98 ± 0.15%. Overall, the results of our study highlight the promising biotechnological potential of S. albidoflavus MGMM6.