Mathematical modelling and comparative analysis of treatment technologies for upgrading wastewater treatment plants: A case study of biofilm reactors in El-Gouna, Egypt

Enhancing biofilm formation with powder carriers for efficient nitrogen and phosphorus removal

This study assesses the improvement in nitrogen and phosphorus removal from wastewater achieved through the integration of zeolite and attapulgite carrier materials into the activated sludge (AS) process. It was found that the addition of these materials significantly enhanced the processing performance of the reactor. Specifically, the use of zeolite and attapulgite powders increased sludge particle sizes to averages of 231.56 μm and 219.62 μm, respectively. This facilitated micro-granule formation, substantially improving the settling characteristics of the sludge and boosting the activity and proliferation of essential microbes. Illumina MiSeq sequencing demonstrated significant accumulations of DGAOs (Candidatus_Competibacter) and DPAOs (Candidatus_Accumulibacter). Furthermore, these carriers augmented the protein content in extracellular polymers, enhancing the hydrophobicity of the sludge and promoting aggregation. Comparative analysis based on the extended Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory indicated a preferential adhesion affinity of sludge for zeolite compared to attapulgite, attributed primarily to Lewis acid-base and electric double-layer interactions. These findings underscore zeolite's enhanced efficacy in biomass fixation and suggest significant potential for the technological advancement of wastewater treatment plants.

Biofilm characterization and dynamic simulation of advanced rope media reactor for the treatment of primary effluent

Biofilm modeling is inherently complex, often requiring multiple assumptions and simplifications. In biofilm modeling, default or literature-based values in biofilm systems are usually used to estimate biofilm parameters, including boundary layer, biofilm density, thickness, attachment, and detachment rates. This study aimed to characterize and model the biofilm of a specific rope-type fixed media system, removing carbon and total inorganic nitrogen, coupled with sensitivity analysis. Among the five model parameters, the sensitivity analysis of this study showed that boundary layer thickness is the most influential parameter for predicting effluent ammonia and nitrate concentrations, and biofilm density is most sensitive with respect to effluent chemical oxygen demand (COD). The least sensitive parameter is the detachment rate. Based on the calculated mean absolute error (MAE) and root mean squared error (RMSE), the calibrated BioCord fixed-film reactor (BFFR) model accurately predicted effluent ammonium and dissolved oxygen (DO) in the continuously aerated bench-scale reactor (R1) and failed to predict well in the intermittently aerated bench-scale reactor (R2). RMSE values calculated for NH3-N and DO in R1 are 0.95 and 0.53 mg/L, respectively. In the BioCord pilot plant's case, ammonium-N predicted by the model fit the measured values well, while it overpredicted DO concentrations. PRACTITIONER POINTS: Fixed biofilm BioCord reactors were studied for primary effluent treatment. A methodology was developed to characterize biofilms. Boundary layer thickness is the most influential parameter for predicting effluent ammonia and nitrate concentrations. Biofilm density is the most sensitive parameter with respect to effluent COD. The calibrated BFFR model can predict effluent ammonium, nitrite, and nitrate-nitrogen.

Performance and microbial response to nitrate nitrogen removal from simulated groundwater by electrode biofilm reactor with Ti/CNT/Cu5-Pd5 catalytic cathode

To enhance the removal of nitrate nitrogen (NO3 - -N) in groundwater with a low C/N ratio, electrocatalytic reduction of NO3 - -N has received extensive attention since its electrons can be directly produced in situ while simultaneously providing a clean electronic donor of hydrogen for denitrifying bacteria. In this study, Ti/CNT/CuPd bimetallic catalytic electrodes with different copper-palladium (CuPd) ratios were prepared by electrodeposition onto carbon nanotube (CNT) using titanium (Ti) plates. The results showed that the NO3 - -N conversion rate by Ti/CNT/Cu5-Pd5 electrode was the highest (53.60%) compared with other CuPd electrode ratios because of the combined role of the copper's high NO3 - -N catalytic activity and the palladium's high N2 selectivity. A new type of electrode biofilm reactor (EBR) with Ti/CNT/Cu5-Pd5 cathode, biochar substrate was constructed to explore the removal ability of NO3 - -N in simulated low C/N groundwater. When the influent NO3 - -N concentration was 30 mg/L, under the condition of a 30 mA electronic current and hydraulic retention time (HRT) of 12 h, the removal rate of NO3 - -N could reach as high as 78.1 ± 1.2%, and the N2 conversion rate was 99.7%. The horizontal distribution of microbial communities in EBR showed that the denitrification capacity was significantly improved through the electrochemical catalytic reduction of the Ti/CNT/Cu5-Pd5 cathode and the supply of the hydrogen electron donor to autotrophic denitrogenerating microbes such as Anaerobacillus, Thauera, and Hydrophaga. This study provides a new bimetallic catalytic cathode to enhance the removal of NO3 - -N in groundwater with a low C/N ratio. PRACTITIONER POINTS: The Cu5Pd5/CNTs/Ti electrode is beneficial to the adsorption and reduction of NO3 - -N to N2 . The production of hydrogen electron donors by cathode promoted nitrogen degradation. Activated electrodes together with denitrifying microorganisms contributed to the improved N removal rate.