Phthalate esters pollution in the leachate, soil, and water around a landfill near the sea, Iran

Size- and shape-dependent effects of polyethylene terephthalate microplastics on the benthic crustacean Artemia franciscana

A large amount of microplastics (MPs) in the marine environment have gradually sunk into the benthic area, and crawling organisms can be easily exposed to the MPs. This study aimed to compare the size- and shape-dependent effects of polyethylene terephthalate (PET) on Artemia franciscana, which crawls on the bottom during the juvenile stage. In this study, the juvenile stage A. franciscana was exposed to three sized fragments (<20 μm, 45-75 μm, and >125 μm) and two fibers (200 μm and 3 mm length) of PET MPs contaminated seawater in a sand-layered system for 48 h. Acute effects on survival, growth rate, gut damage, apoptosis, and swimming activity were observed. The results showed that small edible-sized fragments (< 75 μm) consumed by A. franciscana caused gut damage and inhibited their movement, whereas large-sized fragments (> 125 μm) and fibers (200-3000 μm) induced apoptosis through physical stress. The uptake impacts of small PET MPs and physical effects of fibril shaped PET MPs on A. franciscana suggest that morphology, including size and shape, of PET MPs can be a major factor determining their ecotoxicity to marine benthic organisms.

The Effect of Dicarboxylic Acid Structure on the Plasticizing Ability of Its Ester

Polyvinyl chloride (PVC) belongs to the most widely used group of thermoplastics. Most of the market for PVC products belongs to plasticized compositions. Plasticizers are the most demanded additives in the polymer industry. Environmental problems and the identified toxicity of the plasticizer di(2-ethylhexyl) phthalate (DEHP) stimulate the restriction of its use and contribute to the development of alternative plasticizers. As a possible replacement for phthalates, esters of dicarboxylic acids are known to provide reduced toxicity and high frost resistance to the resulting compositions. In this regard, esters of dicarboxylic acids and ethoxylated alcohols were obtained and their compatibility with polyvinyl chloride was investigated. The plasticizing effect of the esters obtained was evaluated. The thermomechanical characteristics of PVC compositions containing the developed plasticizers were studied, the glass transition temperature was determined, and the areas of the glassy and highly elastic state of the plastics were identified. It was shown that the chemical structure of dicarboxylate used as a plasticizer determines the important technological and operational characteristics of the PVC plastics obtained. Dibutoxyethyl sebacate (DBES) has the best plasticizing effect among the synthesized esters. The expansion of the highly elastic state area for PVC samples containing this ester exceeded the industrial plasticizers DEHP and di(2-ethylhexyl) adipate (DOA). The indicators of the critical temperature of dissolution of PVC in the esters under study suggest ensuring their low migration from PVC plastics.

Review of toxicity and global distribution of phthalate acid esters in fish

Organic additives are incorporated during the manufacturing of plastics, and these additives are gradually released into the environment from plastic debris. Among these, phthalate acid esters (PAEs) are the most prevalent. PAEs can be found in the atmosphere, aquatic ecosystems, terrestrial regions, soil, and within animal and human bodies. They are released from industrial activities and have a significant impact on the natural environment. This study reviews research on PAEs from various regions worldwide, with about 47.8 % of the studies published between 2020 and 2024. The highest concentrations of PAEs were detected in fish samples from rivers in Taiwan, ranging from 13.6 to 70.0 mg/kg dry weight. PAEs tend to accumulate more in benthic organisms and sediments. DEHP was the most prevalent PAE in fish samples, showing the highest levels and detection frequency among the analyzed PAEs. Some studies found a strong correlation (r2 = 0.85) between PAEs concentrations in fish and water. The findings of this study can help in assessing the fate and behavior of PAEs in the environment and provide a basis for developing future management strategies to control phthalate acid esters pollution in aquatic environments.

Dimethyl phthalate exposure induces cognitive impairment via COX2-mediated neuroinflammation

AIM

The present work explored the mechanism of dimethyl phthalate (DMP, the environmental contaminant) exposure in inducing cognitive impairment.

METHODS

Targets and regulatory networks related to DMP-brain injury-cognitive impairment were analyzed through network pharmacology. DMP exposure was carried out to simulate DMP environmental uptake, whereas Morris water maze was performed for examining cognitive impairment. Additionally, inflammatory cytokine levels within tissues were measured. hematoxylin-eosin staining(H&E) and Nissl staining was conducted to examine brain tissue injury, while Western blot was carried out for identifying protein levels. After applying.Small interfering RNA(siRNA-COX2) and celecoxib-COX2 inhibitors separately, we analyzed impacts of DMP. Besides, in vitro experiments were performed to analyze impacts of DMP on microglial activation.

RESULTS

As suggested by network pharmacology,Cyclooxygenase-2-PTGS2 (COX2) showed significant relation to DMP, and it exerted its effect via COX2. Following DMP exposure, mice experienced obvious cognitive impairment and brain damage, besides, microglial cells were activated, and inflammatory cytokines were up-regulated. Applying siRNA-COX2 and celecoxib-COX2 suppressed DMP's impact and mitigated mouse cognitive impairment. Based on in vitro analysis, DMP led to microglial activation and neuroinflammation.

CONCLUSION

DMP exposure causes neuroinflammation via the COX2-regulated microglial activation, thus leading to cognitive impairment. COX2 may serve as the key action target of DMP.

Green synthesis of manganese ferrite magnetic nanoparticle and its modification with metallic-organic frameworks for the tetracycline adsorption from aqueous solutions: A mathematical study of kinetics, isotherms, and thermodynamics

In the current investigation, MnFe2O4/ZIF-8 nanocomposite was generated as a magnetic nanoadsorber using the extract of Dracocephalum plant and characterized by XRD, FTIR, VSM, BET, FESEM, EDS-mapping, TEM, XPS, TPD-NH3, and TGA analyses. Also, to determine its efficiency in the adsorption process of tetracycline, the effect of pH (3-9), nanocomposite dose (0.025-2 g/L), initial pollutant concentration (5-100 mg/L), contact time (5-200 min), and temperature (5-50 °C) were studied. The results of the morphological properties of the magnetic nanocomposite confirmed the spherical shape of this nanoadsorber with an average size of 54 ± 31 nm. BET analysis showed that modification of MnFe2O4 material with ZIF-8 as a new nanoadsorber leads to excellent modification of SBET (143.8 m2/g) and VTotal (0.44 cm3/g). The highest removal efficiency of tetracycline in optimal conditions (pH = 7, contact time = 120 min, nanocomposite dose = 1.5 g/L, and temperature = 20 °C for a tetracycline concentration of 20 mg/L) was 90.11%. As the temperature increased, the removal efficiency increased from 40.46% to 95.06% during 120 min, which indicates that the adsorption reaction is endothermic. In addition, the data obtained from the isotherms of Langmuir (R2 = 0.958), Freundlich (R2 = 0.534), and Temkin (R2 = 0.747) showed that the tetracycline adsorption is monolayer and on the homogeneous surface of the synthesized magnetic nanoadsorber. The elimination process of tetracycline by nanoadsorber followed the pseudo-second order model (R2 = 0.998). Investigating the effect of interfering ions also confirmed the decrease in the adsorption efficiency. Also, the investigation of the reusability of the synthesized magnetic nanoadsorber in tetracycline adsorption indicates that after eight cycles, the efficiency decreases by %16.51. According to the results, the magnetic nanocomposite synthesized in this work can be a suitable and economical adsorber for the removal of tetracycline from aqueous environments.

Occurrence and combined exposure of phthalate esters in urban soil, surface dust, atmospheric dustfall, and commercial food in the semi-arid industrial city of Lanzhou, Northwest China

A total of 138 samples including urban soil, surface dust, atmospheric dustfall, and commercial food were collected from the semi-arid industrial city of Lanzhou in Northwest China, and 22 phthalate esters (PAEs) were analyzed in these samples by gas chromatography-mass spectrometry for the pollution characteristics, potential sources, and combined exposure risks of PAEs. The results showed that the total concentration of 22 PAEs (Ʃ22PAEs) presented surface dust (4.94 × 104 ng/g) ≫ dustfall (1.56 × 104 ng/g) ≫ food (2.14 × 103 ng/g) ≫ urban soil (533 ng/g). Di-n-butyl phthalate (DNBP), di-isobutyl phthalate, di(2-ethylhexyl) phthalate (DEHP), and di-isononyl phthalate/di-isodecyl phthalate were predominant in the environmental media and commercial food, being controlled by priority (52.1%-65.5%) and non-priority (62.1%) PAEs, respectively. Elevated Ʃ22PAEs in the urban soil and surface dust was found in the west, middle, and east of Lanzhou. Principal component analysis indicated that PAEs the urban soil and surface dust were related with the emissions of products containing PAEs, atmosphere depositions, and traffic and industrial emissions. PAEs in the foods were associated with the growth and processing environment. The health risk assessment of United States Environmental Protection Agency based on the Chinese population exposure parameters indicated that the total exposure dose of 22 PAEs was from 0.111 to 0.226 mg/kg/day, which were above the reference dose (0.02 mg/kg/day) and tolerable daily intake (TDI, 0.05 mg/kg/day) for DEHP (0.0333-0.0631 mg/kg/day), and TDI (0.01 mg/kg/day) for DNBP (0.0213-0.0405 mg/kg/day), implying that the exposure of PAEs via multi-media should not be ignored; the total non-carcinogenic risk of six priority PAEs was below 1 for the three environmental media (1.21 × 10-5-2.90 × 10-3), while close to 1 for food (4.74 × 10-1-8.76 × 10-1), suggesting a potential non-carcinogenic risk of human exposure to PAEs in food; the total carcinogenic risk of BBP and DEHP was below 1 × 10-6 for the three environmental media (9.13 × 10-10-5.72 × 10-7), while above 1 × 10-4 for DEHP in food (1.02 × 10-4), suggesting a significantly carcinogenic risk of human exposure to DEHP in food. The current research results can provide certain supports for pollution and risk prevention of PAEs.

Marine litter along the shores of the Persian Gulf, Iran

Plastic wastes -including cigarette butts (CBs)- are dangerous for marine ecosystems not only because they contain hazardous chemicals but also because they can finally turn into micro- or even nano-particles that may be ingested by micro- and macro-fauna. Even large pieces of plastics can trap animals. In this research, the pollution status of macroplastics (abundance, size, type, and colour) and cigarette butts (CBs, number/m2) on the northern coasts of the Persian Gulf has been investigated. A total of 19 stations were explored in Bushehr province (Iran), which covers a length equivalent to 160 km of the Persian Gulf coastline. Among the collected plastic waste (2992 items), disposable mugs were the most frequent (18 %). Plastics with sizes 5-15 cm were the most abundant, and the most common type of plastic was PET (P-value <0.05). The origin of most macroplastics was domestic (2269 items). According to the Index of Clean Coasts (ICC), most surveyed beaches were extremely dirty. The average number and density of CBs in this study were 220 and 2.45 items/m2, respectively. Household litter was the most abundant type of waste in the studied beaches, and this problem can be better managed by training and improving the waste disposal culture. In general, it is suggested that an integrated and enhanced management for fishing, sewage and surface water disposal, and sandy recreational beaches be implemented in Bushehr to control plastic waste.

Enhanced biodegradation of microplastic and phthalic acid ester plasticizer: The role of gut microorganisms in black soldier fly larvae

Hermetia illucens larvae are recognized for their ability to mitigate or eliminate contaminants by biodegradation. However, the biodegradation characteristics of microplastics and phthalic acid esters plasticizers, as well as the role of larval gut microorganisms, have remained largely unrevealed. Here, the degradation kinetics of plasticizers, and biodegradation characteristics of microplastics were examined. The role of larval gut microorganisms was investigated. For larval development, microplastics slowed larval growth significantly (P < 0.01), but the effect of plasticizer was not significant. The degradation kinetics of plasticizers were enhanced, resulting in an 8.11 to 20.41-fold decrease in degradation half-life and a 3.34 to 3.82-fold increase in final degradation efficiencies, compared to degradation without larval participation. The depolymerization and biodeterioration of microplastics were conspicuously evident, primarily through a weight loss of 17.63 %-25.52 %, variation of chemical composition and structure, bio-oxidation and bioerosion of microplastic surface. The synergistic effect driven by larval gut microorganisms, each with various functions, facilitated the biodegradation. Specifically, Ignatzschineria, Paenalcaligenes, Moheibacter, Morganella, Dysgonomonas, Stenotrophomonas, Bacteroides, Sphingobacterium, etc., appeared to be the key contributors, owing to their xenobiotic biodegradation and metabolism functions. These findings offered a new perspective on the potential for microplastics and plasticizers biodegradation, assisted by larval gut microbiota.

Landfill leachates as a significant source for emerging pollutants of phthalic acid esters: Identification, occurrence, characteristics, fate, and transport

Phthalic acid esters (PAEs) are byproducts released from various sources, including microplastics, cosmetics, personal care products, pharmaceuticals, waxes, inks, detergents, and insecticides. This review article provides an overview of the literature on PAEs in landfill leachates, exploring their identification, occurrence, characteristics, fate, and transport in landfills across different countries. The study emphasizes the influence of these substances on the environment, especially on water and soil. Various analytical techniques, such as GC-MS, GC-FID, and HPLC, are commonly employed to quantify concentrations of PAEs. Studies show significant variations in levels of PAEs among different countries, with the highest concentration observed in landfill leachates in Brazil, followed by Iran. Among the different types of PAE, the survey highlights DEHP as the most concentrated PAE in the leachate, with a concentration of 89.6 μg/L. The review also discusses the levels of other types of PAEs. The data shows that DBP has the highest concentration at 6.8 mg/kg, while DOP has the lowest concentration (0.04 mg/kg). The concentration of PAEs typically decreases as the depth in the soil profile increases. In older landfills, concentrations of PAE decrease significantly, possibly due to long-term degradation and conversion of PAE into other chemical compounds. Future research should prioritize evaluating the effectiveness of landfill liners and waste management practices in preventing the release of PAE and other pollutants into the environment. It is also possible to focus on developing efficient physical, biological, and chemical methods for removing PAEs from landfill leachates. Additionally, the effectiveness of existing treatment processes in removing PAEs from landfill leachates and the necessity for new treatment processes can be considered.