Engineered Escherichia coli capable of co-utilization of cellobiose and xylose

Co-utilization of carbon sources in microorganisms for the bioproduction of chemicals

Carbon source is crucial for the cell growth and metabolism in microorganisms, and its utilization significantly affects the synthesis efficiency of target products in microbial cell factories. Compared with a single carbon source, co-utilizing carbon sources provide an alternative approach to optimize the utilization of different carbon sources for efficient biosynthesis of many chemicals with higher titer/yield/productivity. However, the efficiency of bioproduction is significantly limited by the sequential utilization of a preferred carbon source and secondary carbon sources, attributed to carbon catabolite repression (CCR). This review aimed to introduce the mechanisms of CCR and further focus on the summary of the strategies for co-utilization of carbon sources, including alleviation of CCR, engineering of the transport and metabolism of secondary carbon sources, compulsive co-utilization in single culture, co-utilization of carbon sources via co-culture, and evolutionary approaches. The findings of representative studies with a significant improvement in the bioproduction of chemicals via the co-utilization of carbon sources were discussed in this review. It suggested that by combining rational metabolic engineering and irrational evolutionary approaches, co-utilizing carbon sources can significantly contribute to the bioproduction of chemicals.

Recent advances in metabolic engineering of microorganisms for advancing lignocellulose-derived biofuels

Combating climate change and ensuring energy supply to a rapidly growing global population has highlighted the need to replace petroleum fuels with clean, and sustainable renewable fuels. Biofuels offer a solution to safeguard energy security with reduced ecological footprint and process economics. Over the past years, lignocellulosic biomass has become the most preferred raw material for the production of biofuels, such as fuel, alcohol, biodiesel, and biohydrogen. However, the cost-effective conversion of lignocellulose into biofuels remains an unsolved challenge at the industrial scale. Recently, intensive efforts have been made in lignocellulose feedstock and microbial engineering to address this problem. By improving the biological pathways leading to the polysaccharide, lignin, and lipid biosynthesis, limited success has been achieved, and still needs to improve sustainable biofuel production. Impressive success is being achieved by the retouring metabolic pathways of different microbial hosts. Several robust phenotypes, mostly from bacteria and yeast domains, have been successfully constructed with improved substrate spectrum, product yield and sturdiness against hydrolysate toxins. Cyanobacteria is also being explored for metabolic advancement in recent years, however, it also remained underdeveloped to generate commercialized biofuels. The bacterium Escherichia coli and yeast Saccharomyces cerevisiae strains are also being engineered to have cell surfaces displaying hydrolytic enzymes, which holds much promise for near-term scale-up and biorefinery use. Looking forward, future advances to achieve economically feasible production of lignocellulosic-based biofuels with special focus on designing more efficient metabolic pathways coupled with screening, and engineering of novel enzymes.

Enhanced glycolic acid yield through xylose and cellobiose utilization by metabolically engineered Escherichia coli

Microbial biorefinery is a promising route toward sustainable production of glycolic acid (GA), a valuable raw material for various industries. However, inherent microbial GA production has limited substrate consumption using either D-xylose or D-glucose as carbon catabolite repression (CCR) averts their co-utilization. To bypass CCR, a GA-producing strain using D-xylose via Dahms pathway was engineered to allow cellobiose uptake. Unlike glucose, cellobiose was assimilated and intracellularly degraded without repressing D-xylose uptake. The final GA-producing E. coli strain (CLGA8) has an overexpressed cellobiose phosphorylase (cep94A) from Saccharophagus degradans 2-40 and an activated glyoxylate shunt pathway. Expression of cep94A improved GA production reaching the maximum theoretical yield (0.51 g GA g^-1 xylose), whereas activation of glyoxylate shunt pathway enabled GA production from cellobiose, which further increased the GA titer (2.25 g GA L^-1). To date, this is the highest reported GA yield from D-xylose through Dahms pathway in an engineered E. coli with cellobiose as co-substrate.

Biorefinery: The Production of Isobutanol from Biomass Feedstocks

Environmental issues have prompted the vigorous development of biorefineries that use agricultural waste and other biomass feedstock as raw materials. However, most current biorefinery products are cellulosic ethanol. There is an urgent need for biorefineries to expand into new bioproducts. Isobutanol is an important bulk chemical with properties that are close to gasoline, making it a very promising biofuel. The use of microorganisms to produce isobutanol has been extensively studied, but there is still a considerable gap to achieving the industrial production of isobutanol from biomass. This review summarizes current metabolic engineering strategies that have been applied to biomass isobutanol production and recent advances in the production of isobutanol from different biomass feedstocks.

Systems Metabolic Engineering of Escherichia coli

Systems metabolic engineering, which recently emerged as metabolic engineering integrated with systems biology, synthetic biology, and evolutionary engineering, allows engineering of microorganisms on a systemic level for the production of valuable chemicals far beyond its native capabilities. Here, we review the strategies for systems metabolic engineering and particularly its applications in Escherichia coli. First, we cover the various tools developed for genetic manipulation in E. coli to increase the production titers of desired chemicals. Next, we detail the strategies for systems metabolic engineering in E. coli, covering the engineering of the native metabolism, the expansion of metabolism with synthetic pathways, and the process engineering aspects undertaken to achieve higher production titers of desired chemicals. Finally, we examine a couple of notable products as case studies produced in E. coli strains developed by systems metabolic engineering. The large portfolio of chemical products successfully produced by engineered E. coli listed here demonstrates the sheer capacity of what can be envisioned and achieved with respect to microbial production of chemicals. Systems metabolic engineering is no longer in its infancy; it is now widely employed and is also positioned to further embrace next-generation interdisciplinary principles and innovation for its upgrade. Systems metabolic engineering will play increasingly important roles in developing industrial strains including E. coli that are capable of efficiently producing natural and nonnatural chemicals and materials from renewable nonfood biomass.

Intracellular cellobiose metabolism and its applications in lignocellulose-based biorefineries

Complete hydrolysis of cellulose has been a key characteristic of biomass technology because of the limitation of industrial production hosts to use cellodextrin, the partial hydrolysis product of cellulose. Cellobiose, a β-1,4-linked glucose dimer, is a major cellodextrin of the enzymatic hydrolysis (via endoglucanase and exoglucanase) of cellulose. Conversion of cellobiose to glucose is executed by β-glucosidase. The complete extracellular hydrolysis of celluloses has several critical barriers in biomass technology. An alternative bioengineering strategy to make the bioprocessing less challenging is to engineer microbes with the abilities to hydrolyze and assimilate the cellulosic-hydrolysate cellodextrin. Microorganisms engineered to metabolize cellobiose rather than the monomeric glucose can provide several advantages for lignocellulose-based biorefineries. This review describes the recent advances and challenges in engineering efficient intracellular cellobiose metabolism in industrial hosts. This review also describes the limitations of and future prospectives in engineering intracellular cellobiose metabolism.

Concurrent metabolism of pentose and hexose sugars by the polyextremophile Alicyclobacillus acidocaldarius

Alicyclobacillus acidocaldarius is a thermoacidophilic bacterium capable of growth on sugars from plant biomass. Carbon catabolite repression (CCR) allows bacteria to focus cellular resources on a sugar that provides efficient growth, but also allows sequential, rather than simultaneous use when more than one sugar is present. The A. acidocaldarius genome encodes all components of CCR, but transporters encoded are multifacilitator superfamily and ATP-binding cassette-type transporters, uncommon for CCR. Therefore, global transcriptome analysis of A. acidocaldarius grown on xylose or fructose was performed in chemostats, followed by attempted induction of CCR with glucose or arabinose. Alicyclobacillus acidocaldarius grew while simultaneously metabolizing xylose and glucose, xylose and arabinose, and fructose and glucose, indicating that CCR did not control carbon metabolism. Microarrays showed down-regulation of genes during growth on one sugar compared to two, and occurred primarily in genes encoding: (1) regulators; (2) enzymes for cell wall synthesis; and (3) sugar transporters.

Improving xylose utilization of defatted rice bran for nisin production by overexpression of a xylose transcriptional regulator in Lactococcus lactis

Present investigation explores the potential of defatted rice bran (DRB) serving as sole carbon source and partial nitrogen source to support Lactococcus lactis growth and nisin production. To retain the nutrients in DRB, especially protein fractions, thermal pretreatment followed by enzymatic hydrolysis without washing step was applied for saccharification. A maximum of 45.64g reducing sugar mainly containing 30.26g glucose and 5.66g xylose from 100g DRB was attained in hydrolysates of DRB (HD). A novel strategy of xylR (xylose transcriptional regulator) overexpression followed by evolutionary engineering was proposed, which significantly increased the capacity of L. lactis to metabolize xylose. Subsequently, RT-PCR results indicated that xylR overexpression stimulated expression of xylose assimilation genes synergistically with exposure to xylose. In HD medium, the highest nisin titer of the engineered strain FEXR was 3824.53IU/mL, which was 1.37 times of that in sucrose medium by the original strain F44.

Oligo- and dsDNA-mediated genome editing using a tetA dual selection system in Escherichia coli

The ability to precisely and seamlessly modify a target genome is needed for metabolic engineering and synthetic biology techniques aimed at creating potent biosystems. Herein, we report on a promising method in Escherichia coli that relies on the insertion of an optimized tetA dual selection cassette followed by replacement of the same cassette with short, single-stranded DNA (oligos) or long, double-stranded DNA and the isolation of recombinant strains by negative selection using NiCl2. This method could be rapidly and successfully used for genome engineering, including deletions, insertions, replacements, and point mutations, without inactivation of the methyl-directed mismatch repair (MMR) system and plasmid cloning. The method we describe here facilitates positive genome-edited recombinants with selection efficiencies ranging from 57 to 92%. Using our method, we increased lycopene production (3.4-fold) by replacing the ribosome binding site (RBS) of the rate-limiting gene (dxs) in the 1-deoxy-D-xylulose-5-phosphate (DXP) biosynthesis pathway with a strong RBS. Thus, this method could be used to achieve scarless, proficient, and targeted genome editing for engineering E. coli strains.

Comparative genomics and metabolomics analyses of the adaptation mechanism in Ketogulonicigenium vulgare-Bacillus thuringiensis consortium

Adaptive evolution by serial subcultivation of co-cultured Bacillus thuringiensis and Ketogulonicigenium vulgare significantly enhanced the productivity of 2-keto-L-gulonic acid in two-step vitamin C production. The adaptation mechanism in K. vulgare-B. thuringiensis consortium was investigated in this study based on comparative genomics and metabolomics studies. It was found that the growth, anti-oxidation, transcription and regulation were significantly enhanced in the adapted consortium. The mutation of the genes, which encode amidohydrolase in adapted K. vulgare (K150) and amino acid permease in adapted B. thuringiensis (B150), resulted in the increase of some amino acids levels in each species, and further enhanced the metabolic exchange and growth ability of the two species. Besides, the mutation of the gene encoding spore germination protein enhanced the metabolic levels of tricarboxylic acid cycle, and decreased the sporulation in B150, which induced its growth. The mutation of the genes, which encode NADPH nitroreductase in K150 and NADPH-dependent FMN reductase in B150, may enhance the ability of anti-oxidation. Overall, the long-term adaptation of K. vulgare and B. thuringiensis influenced the global regulation and made them more inseparable in metabolite exchange. Our work will provide ideas for the molecular design and optimization in microbial consortium.

Quorum Sensing Communication Modules for Microbial Consortia

The power of a single engineered organism is limited by its capacity for genetic modification. To circumvent the constraints of any singular microbe, a new frontier in synthetic biology is emerging: synthetic ecology, or the engineering of microbial consortia. Here we develop communication systems for such consortia in an effort to allow for complex social behavior across different members of a community. We posit that such communities will outpace monocultures in their ability to perform complicated tasks if communication among and between members of the community is well regulated. Quorum sensing was identified as the most promising candidate for precise control of engineered microbial ecosystems, due to its large diversity and established utility in synthetic biology. Through promoter and protein modification, we engineered two quorum sensing systems (rpa and tra) to add to the extensively used lux and las systems. By testing the cross-talk between all systems, we thoroughly characterized many new inducible systems for versatile control of engineered communities. Furthermore, we've identified several system pairs that exhibit useful types of orthogonality. Most notably, the tra and rpa systems were shown to have neither signal crosstalk nor promoter crosstalk for each other, making them completely orthogonal in operation. Overall, by characterizing the interactions between all four systems and their components, these circuits should lend themselves to higher-level genetic circuitry for use in microbial consortia.

Metabolic Engineering Strategies for Co-Utilization of Carbon Sources in Microbes

Co-utilization of carbon sources in microbes is an important topic in metabolic engineering research. It is not only a way to reduce microbial production costs but also an attempt for either improving the yields of target products or decreasing the formation of byproducts. However, there are barriers in co-utilization of carbon sources in microbes, such as carbon catabolite repression. To overcome the barriers, different metabolic engineering strategies have been developed, such as inactivation of the phosphotransferase system and rewiring carbon assimilation pathways. This review summarizes the most recent developments of different strategies that support microbes to utilize two or more carbon sources simultaneously. The main content focuses on the co-utilization of glucose and pentoses, major sugars in lignocellulose.

Can the natural diversity of quorum-sensing advance synthetic biology?

Quorum-sensing networks enable bacteria to sense and respond to chemical signals produced by neighboring bacteria. They are widespread: over 100 morphologically and genetically distinct species of eubacteria are known to use quorum sensing to control gene expression. This diversity suggests the potential to use natural protein variants to engineer parallel, input-specific, cell-cell communication pathways. However, only three distinct signaling pathways, Lux, Las, and Rhl, have been adapted for and broadly used in engineered systems. The paucity of unique quorum-sensing systems and their propensity for crosstalk limits the usefulness of our current quorum-sensing toolkit. This review discusses the need for more signaling pathways, roadblocks to using multiple pathways in parallel, and strategies for expanding the quorum-sensing toolbox for synthetic biology.

Creation of cellobiose and xylooligosaccharides-coutilizing Escherichia coli displaying both β-glucosidase and β-xylosidase on its cell surface

We demonstrated direct utilization of xylooligosaccharides using β-xylosidase-displaying Escherichia coli. After screening active β-xylosidases, BSU17580 from Bacillus subtilis or Tfu1616 from Thermobifida fusca YX, were successfully displayed on the E. coli cell surface using Blc or HdeD as anchor proteins, and these transformants directly assimilated xylooligosaccharides as a carbon source. The final OD 600 in minimal medium containing 2% xylooligosaccharides was 1.09 (after 12 h of cultivation) and 1.30 (after 40 h of cultivation). We then constructed an E. coli strain displaying both β-glucosidase and β-xylosidase. β-glucosidase- and β-xylosidase-displaying E. coli was successfully grown on a 1% cellobiose and 1% xylooligosaccharides mixture, and the OD 600 was 1.76 after 10 h of cultivation, which was higher and reached faster than that grown on a glucose/xylose mixture (1.20 after 30 h of cultivation).

Feasibilities of consolidated bioprocessing microbes: from pretreatment to biofuel production

Lignocelluloses are rich sugar treasures, which can be converted to useful commodities such as biofuel with the help of efficient combination of enzymes and microbes. Although several bioprocessing approaches have been proposed, biofuel production from lignocelluloses is limited because of economically infeasible technologies for pretreatment, saccharification and fermentation. Use of consolidated bioprocessing (CBP) microbes is the most promising method for the cost-effective production of biofuels. However, lignocelluloses are obtained from highly diverse environment and hence are heterogeneous in nature. Therefore, it is necessary to develop and integrate tailor-designed pretreatment processes and efficient microbes that can thrive on many different kinds of biomass. In this review, the progress towards the construction of consolidated bioprocessing microbes, which can efficiently convert heterogeneous lignocellulosic biomass to bioenergy, has been discussed; in addition, the potential and constraints of current bioprocessing technologies for cellulosic biofuel production have been discussed.

Heterologous expression of plant cell wall degrading enzymes for effective production of cellulosic biofuels

A major technical challenge in the cost-effective production of cellulosic biofuel is the need to lower the cost of plant cell wall degrading enzymes (PCDE), which is required for the production of sugars from biomass. Several competitive, low-cost technologies have been developed to produce PCDE in different host organisms such as Escherichia coli, Zymomonas mobilis, and plant. Selection of an ideal host organism is very important, because each host organism has its own unique features. Synthetic biology-aided tools enable heterologous expression of PCDE in recombinant E. coli or Z. mobilis and allow successful consolidated bioprocessing (CBP) in these microorganisms. In-planta expression provides an opportunity to simplify the process of enzyme production and plant biomass processing and leads to self-deconstruction of plant cell walls. Although the future of currently available technologies is difficult to predict, a complete and viable platform will most likely be available through the integration of the existing approaches with the development of breakthrough technologies.

Rewiring carbon catabolite repression for microbial cell factory

Carbon catabolite repression (CCR) is a key regulatory system found in most microorganisms that ensures preferential utilization of energy-efficient carbon sources. CCR helps microorganisms obtain a proper balance between their metabolic capacity and the maximum sugar uptake capability. It also constrains the deregulated utilization of a preferred cognate substrate, enabling microorganisms to survive and dominate in natural environments. On the other side of the same coin lies the tenacious bottleneck in microbial production of bioproducts that employs a combination of carbon sources in varied proportion, such as lignocellulose-derived sugar mixtures. Preferential sugar uptake combined with the transcriptional and/or enzymatic exclusion of less preferred sugars turns out one of the major barriers in increasing the yield and productivity of fermentation process. Accumulation of the unused substrate also complicates the downstream processes used to extract the desired product. To overcome this difficulty and to develop tailor-made strains for specific metabolic engineering goals, quantitative and systemic understanding of the molecular interaction map behind CCR is a prerequisite. Here we comparatively review the universal and strain-specific features of CCR circuitry and discuss the recent efforts in developing synthetic cell factories devoid of CCR particularly for lignocellulose- based biorefinery.