Immobilization of Pseudomonas cepacia lipase on layered double hydroxide of Zn/Al-Cl for kinetic resolution of rac-1-phenylethanol

Triggering of Polymer-Degrading Enzymes from Layered Double Hydroxides for Recycling Strategies

The use of degrading enzymes in polymer formulation is a very attractive strategy to manage the end-of-life of plastics. However, high temperatures cause the denaturation of enzymes and the loss of their catalytic activity; therefore, protection strategies are necessary. Once protected, the enzyme needs to be released in appropriate media to exert its catalytic activity. A successful protection strategy involves the use of layered double hydroxides: cutinase, selected as a highly degrading polyester hydrolytic enzyme, is thermally protected by immobilization in Mg/Al layered double hydroxide structures. Different triggering media are here evaluated in order to find the best releasing conditions of cutinase from LDH. In detail, phosphate and citrate-phosphate buffers, potassium carbonate, sodium chloride, and sodium sulfate solutions are studied. After the comparison of all media in terms of protein release and activity retained, phosphate buffer is selected as the best candidate for the release of cutinase from LDH, and the effect of pH and concentration is also evaluated. The amount of the enzyme released is determined with the Lowry method. Activity tests are performed via spectrophotometry.

Biocatalysts Synthesized with Lipase from Pseudomonas cepacia on Glycol-Modified ZIF-8: Characterization and Utilization in the Synthesis of Green Biodiesel

This research presents results on the production of biodiesel from the transesterification of acylglycerides present in palm oil, using the biocatalysts ZIF-8-PCL and Gly@ZIF-8-PCL synthesized by immobilization of Pseudomonas Cepacia Lipase as catalytic materials and using pure ZIF-8 and Gly@ZIF-8 (modified ZIF-8) as supports. The Gly@ZIF-8 carbonaceous material was prepared by wet impregnation of ZIF-8 with ethylene glycol as the carbon source, and then thermally modified. The calcination conditions were 900 °C for two hours with a heating rate of 7 °C/min in an inert atmosphere. A textural characterization was performed, and results showed superficial changes of materials at the microporous and mesoporous levels for the Gly@ZIF-8 material. Both the starting materials and biocatalysts were characterized by infrared spectroscopy (FTIR) and Raman spectroscopy. During the transesterification, using the two biocatalysts (ZIF-8-PCL and Gly@ZIF-8-PCL), two supernatant liquids were generated which were characterized by infrared spectroscopy (FTIR), gas chromatography coupled to mass spectrometry (GC-MS), and nuclear magnetic resonance (NMR). The results show that the two routes of synthesis of supports from ZIF-8 will be configured as effective methods for the generation of effective biocatalysts for biodiesel production.

Bioconjugation Strategy for Ceramic Membranes Decorated with Candida Antarctica Lipase B-Impact of Immobilization Process on Material Features

A strategy for the bioconjugation of the enzyme Candida antarctica lipase B onto titania ceramic membranes with varied pore sizes (15, 50, 150, and 300 kDa) was successfully performed. The relationship between the membrane morphology, i.e.,the pore size of the ceramic support, and bioconjugation performance was considered. Owing to the dimension of the enzyme (~33 kDa), the morphology of the ceramics allowed (50, 150, and 300 kDa) or did not allow (15 kDa) the entrance of the enzyme molecules into the porous structure. Such a strategy made it possible to better understand the changes in the material (morphology) and physicochemical features (wettability, adhesiveness, and surface charge) of the samples, which were systematically examined. The silane functionalization and enzyme immobilization were accomplished via the covalent route. The samples were characterized after each stage of the modification, which was very informative from the material point of view. As a consequence of the modification, significant changes in the contact angle, roughness, adhesion, and zeta potential were observed. For instance, for the 50 kDa membrane, the contact angle increased from 29.1 ± 1.5° for the pristine sample to 72.3 ± 1.5° after silane attachment; subsequently, it was reduced to 57.2 ± 1.5° after the enzyme immobilization. Finally, the contact angle of the bioconjugated membrane used in the enzymatic process rose to 92.9 ± 1.5°. By roughness (S_q) controlling, the following amendments were noticed: for the pristine 50 kDa membrane, S_q = 1.87 ± 0.21 µm; after silanization, S_q = 2.33 ± 0.30 µm; after enzyme immobilization, S_q = 2.74 ± 0.26 µm; and eventually, after the enzymatic process, S_q = 2.37 ± 0.27 µm. The adhesion work of the 50 kDa samples was equal to 136.41 ± 2.20 mN m⁻¹ (pristine membrane), 94.93 ± 2.00 mN m⁻¹ (with silane), 112.24 ± 1.90 mN m⁻¹ (with silane and enzyme), and finally, 69.12 ± 1.40 mN m⁻¹ (after the enzymatic process). The materials and physicochemical features changed substantially, particularly after the application of the membrane in the enzymatic process. Moreover, the impact of ceramic material morphology on the zeta potential value is here presented for the first time. With an increase in the ceramic support cut-off, the amount of immobilized lipase rose, but the specific productivity was higher for membranes possessing smaller pores, owing to the higher grafting density. For the enzymatic process, two modes of accomplishment were selected, i.e., stirred-tank and cross-flow. The latter method was characterized by a much higher effectiveness, with a resulting productivity equal to 99.7 and 60.3 µmol h⁻¹ for the 300 and 15 kD membranes, respectively.

Synthesis of core-shell Ce-modified mixed metal oxides derived from P123-templated layered double hydroxides

Layered double hydroxides are a promising platform material which can be combined with a variety of active species based on their characteristic features. Silicon@P123-templated Ce-doped layered double hydroxide (SiO2@CeMgAl-LDH(P123)) composites were synthesized via a facile in situ co-precipitation method, and characterized by TEM, X-ray diffraction, FTIR, XPS, CO2-, etc. in detail. Meanwhile, the calcined powder (SiO2@CeMgAl-LDO(P123)) possessed an excellent core-shell structure and a high surface area inherited from the LDH structure, which led to an outstanding catalytic activity (99.7% conversion of propylene oxide, 92.4% selectivity of propylene glycol methyl ether) under mild reaction conditions (120 °C). Cerium oxide provides a large number of oxygen vacancies and significantly improves the medium basic strength of the material, which facilitates the selective ring-opening of PO. Furthermore, the introduction and removal of P123 make the cerium oxide uniformly dispersed on the LDH layers, providing more reaction sites for the reaction of methanol and propylene oxide. The core-shell structure prepared by the in situ co-precipitation method could solve the shortcomings of agglomeration of layered double hydroxides and prolong the catalytic life evidently.

Amano Lipase PS from Burkholderia cepacia- Evaluation of the Effect of Substrates and Reaction Media on the Catalytic Activity

:

Lipases in the native or immobilized form have commonly been used as catalysts in the chemical and pharmaceutical industry. One of the widely available enzyme catalysts on the market is lipase from Burkholderia cepacia (BCLs), previously called Pseudomonas cepacia (PCLs). This enzyme is applied, among others, in the stereoselective acylation of molecules to achieve chiral pure enantiomers of drugs or their building blocks. In this study, Amano lipase PS (APS-BCL), which is a commercial lipase from Burkholderia cepacia (BC) was tested. The lipolytic activity of APS-BCL by hydrolysis of vegetable oils and enantioselective activity of APS-BCL by the kinetic resolution of (R,S)-1-phenylethanol with using isopropenyl acetate as an acyl donor were evaluated. An effect of reaction media with different logP values (t-butyl methyl ether, dichloromethane, diisopropyl ether, toluene, cyclohexane, n-hexane, isooctane and n-heptane) on the enantioselective activity of lipase was also studied. The high value of the enantiomeric ratio (E =308.5) with the utilization of isopropenyl acetate was achieved. Whereas, the best reaction medium turned out to be diisopropyl ether, C =47.9%, eep =98%, ees =90%, after 24 h of incubation. Moreover, the influence of ω6/ω9 polyunsaturated fatty acids (PUFAs) ratio in commercial (peanut, camelina, rape, pumpkin seed, walnut, sesame, avocado, rice, corn, black cumin, hemp, safflower, grape seed) oils was investigated for the lipase activity. For the first time, the cut-off limit of ω6/ω9 ratio was proposed. The ratio equal to or higher than 2.3 allows achieving higher lipolytic activity.

Lipase Immobilized on a Novel Rigid-Flexible Dendrimer-Grafted Hierarchically Porous Magnetic Microspheres for Effective Resolution of (R,S)-1-Phenylethanol

With the rapid development of biotechnological industry, there is an urgent need for exploiting new materials to immobilize enzymes to improve the performance of biocatalysts. In this paper, hierarchically porous magnetic microspheres (PFMMs) were prepared through solvothermal method and rapidly grafted with a novel rigid-flexible dendrimer first synthesized from monomers of trimesoyl chloride (TMC) and 1,6-hexanediamine (HDA) via interfacial polymerization process for covalent immobilization of Pseudomonas fluorescens lipase (PFL). The maximum PFL loading of the synthesized support reaches 87.5 mg_protein/g_support, and 864% activity recovery of PFMMs-G_3.0-PFL can be achieved at pH 9.0. Then, it was used to catalyze the resolution of (R,S)-1-phenylethanol with vinyl acetate. Under the optimized conditions, 50.0% conversion with 99.0% ee_s can be reached within 1.5 h. In addition, a conversion of 49.2% and ee_s of 96.9% can be retained after 10 batches of running, displaying an excellent operational stability. Importantly, a further investigation shows that the obviously improved reusability of the immobilized PFL is ascribed to the increased rigidity in comparison to fully flexible dendrimer. Thus, the newly constructed protocol for lipase immobilization exhibits a great prospect in biochemical engineering.