Characterization and rational design for substrate specificity of a prolyl endopeptidase from Stenotrophomonas maltophilia

One-step high efficiency separation of prolyl endopeptidase from Aspergillus niger and its application

Prolyl endopeptidase from Aspergillus niger (An-PEP) is an enzyme that recognizes C-terminal peptide bonds of amino acid chains and cleaves them by hydrolysis. An aqueous two-phase system (ATPS) was used to separate An-PEP from fermentation broth. Through single factor experiments, the ATPS containing 16 % (w/w) PEG2000 and 15 % (w/w) (NH4)2SO4 at pH 6.0 obtained the recovery of 79.74 ± 0.16 % and the purification coefficient of 7.64 ± 0.08. It was then used to produce soy protein isolate peptide (SPIP) by hydrolysis of soy protein isolate (SPI), and SPIP-Ferrous chelate (SPIP-Fe) was prepared with SPIP and Fe2+. The chelation conditions were optimized by RSM, as the chelation time was 30 min, chelation temperature was 25 °C, SPIP mass to VC mass was two to one and pH was 6.0. The obtained chelation rate was 82.56 ± 2.30 %. The change in the structures and functional features of SPIP before and after chelation were investigated. The FTIR and UV-Vis results indicated that the chelation of Fe2+ and SPIP depended mainly on the formation of amide bonds. The fluorescence, SEM and amino acid composition analysis results indicated that Fe2+ could induce and stabilize the surface conformation and change the amino acid distribution on the surfaces of SPIP. The chelation of SPIP and Fe2+ resulted in the enhancement of radical scavenging activities and ACE inhibitory activities. This work provided a new perspective for the further development of peptide-Fe chelates for iron supplement.

Characterization, Semirational Design for pH Robustness, and the Application in Bioactive Peptide Production of a X-Prolyl Dipeptidyl Aminopeptidase from Lactococcus lactis MY-3

PepXLcMY-3, an X-prolyl dipeptidyl aminopeptidase derived from Lactobacillus lactis MY-3, was screened and recombinantly expressed in Escherichia coli. The enzyme could exhibit about 40% activity within the pH range of 6.0-10. To further improve the pH robustness, site E396 located in the active pocket was discovered through alanine scanning. The mutant E396I displayed both developed activity and kcat/Km. The optimal pH of E396I shifted from 6.0 to 10 compared to WT, with the relative activity within the pH range of 6.0-10 significantly increased. The site K648 was then proposed by semirational design. The activity of mutant E396I/K648D reached 4.03 U/mg. The optimal pH was restored to 6.0, and the pH stability was further improved. E396I/K648D could totally hydrolyze β-casomorphin 7 within 30 min. The hydrolysate showed 64.5% inhibition on angiotensin I converting enzyme, which was more efficient than those produced by E396I and WT, 23.2 and 44.7%, respectively.

Unraveling the allosteric mechanisms of prolyl endopeptidases for celiac disease therapy: Insights from molecular dynamics simulations

Prolyl endopeptidases (PEP) from Sphingomonas capsulata (sc) and Myxococcus xanthus (mx) selectively degrade gluten peptides in vitro, offering a potential therapeutic strategy for celiac disease. However, the mechanisms governing the interaction of these enzymes with their substrates remain unclear. In this study, conventional molecular dynamics simulations with a microsecond timescale and targeted molecular dynamics simulations were performed to investigate the native states of mxPEP and scPEP enzymes, as well as their allosteric binding with a representative substrate, namely, Z-Ala-Pro-p-nitroanilide (pNA). The simulations reveal that the native scPEP is in an open state, while the native mxPEP is in a closed state. When pNA approaches a closed mxPEP, it binds to an allosteric pocket located at the first and second β-sheet of the β-propeller domain, inducing the opening of this enzyme. Neither enzyme is active in the open or partly-open states. Enzymatic activity is enabled only when the catalytic pocket in the closed state fully accommodates the substrates. The internal capacity of the catalytic pocket of PEP in the closed state determines the maximum size of the gluten peptides that the enzymes can catalyze. The present work provides essential molecular dynamics information for the redesign or engineering of PEP enzymes.

Impacts of Sourdough Technology on the Availability of Celiac Peptides from Wheat α- and γ-Gliadins: In Silico Approach

Celiac peptide-generating α- and γ-gliadins consist of a disordered N-terminal domain extended by an α-helical-folded C-terminal domain. Celiac peptides, primarily located along the disordered part of α- and γ-gliadin molecules, are nicely exposed and directly accessible to proteolytic enzymes occurring in the gastric (pepsin) and intestinal (trypsin, chymotrypsin) fluids. More than half of the potential celiac peptides identified so far in gliadins exhibit cleavage sites for pepsin. However, celiac peptides proteolytically truncated by one or two amino acid residues could apparently retain some activity toward HLA-DQ2 and HLA-DQ8 receptors in docking experiments. Together with the uncleaved peptides, these still active partially degraded CD peptides account for the incapacity of the digestion process to inactivate CD peptides from gluten proteins. In contrast, sourdough fermentation processes involve other proteolytic enzymes susceptible to the deep degradation of celiac peptides. In particular, sourdough supplemented by fungal prolyl endoproteases enhances the degrading capacities of the sourdough fermentation process toward celiac peptides. Nevertheless, since tiny amounts of celiac peptides sufficient to trigger deleterious effects on CD people can persist in sourdough-treated bread and food products, it is advisable to avoid consumption of sourdough-treated food products for people suffering from celiac disease. As an alternative, applying the supplemented sourdough process to genetically modified low gluten or celiac-safe wheat lines should result in food products that are safer for susceptible and CD people.

Post-Proline Cleaving Enzymes (PPCEs): Classification, Structure, Molecular Properties, and Applications

Proteases or peptidases are hydrolases that catalyze the breakdown of polypeptide chains into smaller peptide subunits. Proteases exist in all life forms, including archaea, bacteria, protozoa, insects, animals, and plants due to their vital functions in cellular processing and regulation. There are several classes of proteases in the MEROPS database based on their catalytic mechanisms. This review focuses on post-proline cleaving enzymes (PPCEs) from different peptidase families, as well as prolyl endoprotease/oligopeptidase (PEP/POP) from the serine peptidase family. To date, most PPCEs studied are of microbial and animal origins. Recently, there have been reports of plant PPCEs. The most common PEP/POP are members of the S9 family that comprise two conserved domains. The substrate-limiting β-propeller domain prevents unwanted digestion, while the α/β hydrolase catalyzes the reaction at the carboxyl-terminal of proline residues. PPCEs display preferences towards the Pro-X bonds for hydrolysis. This level of selectivity is substantial and has benefited the brewing industry, therapeutics for celiac disease by targeting proline-rich substrates, drug targets for human diseases, and proteomics analysis. Protein engineering via mutagenesis has been performed to improve heat resistance, pepsin-resistant capability, specificity, and protein turnover of PPCEs for pharmacological applications. This review aims to synthesize recent structure-function studies of PPCEs from different families of peptidases to provide insights into the molecular mechanism of prolyl cleaving activity. Despite the non-exhaustive list of PPCEs, this is the first comprehensive review to cover the biochemical properties, biological functions, and biotechnological applications of PPCEs from the diverse taxa.

Effective separation of prolyl endopeptidase from Aspergillus Niger by aqueous two phase system and its characterization and application

Aspergillus niger prolyl endopeptidase (An-PEP) has become a research focus because of its advantages in specifically cleaving the C-terminal peptide bond of proline residues, especially it was an industrial food-grade acidic PEP. Aqueous two-phase system (ATPS) was first applied for separating An-PEP from fermentation broth. Via response surface method (RSM) experiment, an effectively separation of An-PEP was achieved by ATPS containing27% (w/w) ethanol and 14.5% (w/w) (NH₄)₂SO₄ at pH 6.0 with the recovery of 90.29 ± 0.23% and purification coefficient of 15.35 ± 0.30. The purified An-PEP was characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), fourier transform infrared (FTIR) and fluorescence spectrometry. The optimum temperature and pH of An-PEP were 40 °C and 4.5-5.0, respectively. An-PEP was activated and stabilized by Ca²⁺ but inhibited by Fe³⁺. The enzymatic application of purified An-PEP was evaluated by hydrolyzing egg white protein (EWP) to prepare bioactive peptides. The obtained hydrolysates had good scavenging ability of OH and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) free radicals, angiotensin converting enzyme (ACE) inhibitory activity and anti-gout activity. This research realized a low-cost, high-efficiency and simple separation technology of An-PEP and provided a broader idea for the preparation of bioactive peptides and the application of An-PEP.