Role of additives in the water vapor transport through block co-poly(amide/ether) membranes: effects on surface and bulk polymer properties

Editorial for the Special Issue "Preparation and Application of Advanced Functional Membranes"

Membrane science is a discipline that cuts across almost all fields of research and experimentation [...].

Pathway for Water Transport through Breathable Nanocomposite Membranes of PEBAX with Ionic Liquid [C12C1im]Cl

Water transport through membranes is an attractive topic among the research dedicated to dehydration processes, microenvironment regulation, or more simply, recovery of freshwater. Herein, an atomistic computer simulation is proposed to provide new insights about a water vapor transport mechanism through PEBAX membranes filled with ionic liquid (IL) [C12C1im]Cl. Starting from experimental evidence that indicates an effective increase in water permeation as the IL is added to the polymer matrix (e.g., up to 85·10-3 (g·m)/(m2·day) at 318.15 K for PEBAX@2533 membranes loaded with 70% of IL), molecular dynamics simulations are proposed to explore the key role of IL in water transport inside membranes. The polar region composed of anions and cationic head groups of the IL is demonstrated to serve as the pathway for water transport through the membrane. Water molecules always stay near the pathway, which becomes wider and thus has a larger water-accessible area with increasing IL concentration. Hence, the diffusion coefficients of water molecules and ions increase as the IL concentration increases. The simulation provides useful indications about a microscopic mechanism that regulates the transport of water vapor through a kind of PEBAX/IL membrane, resulting in full agreement with the experimental evidence.

Aliquots of MIL-140 and Graphene in Smart PNIPAM Mixed Hydrogels: A Nanoenvironment for a More Eco-Friendly Treatment of NaCl and Humic Acid Mixtures by Membrane Distillation

The problem of water scarcity is already serious and risks becoming dramatic in terms of human health as well as environmental safety. Recovery of freshwater by means of eco-friendly technologies is an urgent matter. Membrane distillation (MD) is an accredited green operation for water purification, but a viable and sustainable solution to the problem needs to be concerned with every step of the process, including managed amounts of materials, membrane fabrication procedures, and cleaning practices. Once it is established that MD technology is sustainable, a good strategy would also be concerned with the choice of managing low amounts of functional materials for membrane manufacturing. These materials are to be rearranged in interfaces so as to generate nanoenvironments wherein local events, conceived to be crucial for the success and sustainability of the separation, can take place without endangering the ecosystem. In this work, discrete and random supramolecular complexes based on smart poly(N-isopropyl acrylamide) (PNIPAM) mixed hydrogels with aliquots of ZrO(O₂C-C₁₀H₆-CO₂) (MIL-140) and graphene have been produced on a polyvinylidene fluoride (PVDF) sublayer and have been proven to enhance the performance of PVDF membranes for MD operations. Two-dimensional materials have been adhered to the membrane surface through combined wet solvent (WS) and layer-by-layer (LbL) spray deposition without requiring further subnanometer-scale size adjustment. The creation of a dual responsive nanoenvironment has enabled the cooperative events needed for water purification. According to the MD's rules, a permanent hydrophobic state of the hydrogels together with a great ability of 2D materials to assist water vapor diffusion through the membranes has been targeted. The chance to switch the density of charge at the membrane-aqueous solution interface has further allowed for the choice of greener and more efficient self-cleaning procedures with a full recovery of the permeation properties of the engineered membranes. The experimental evidence of this work confirms the suitability of the proposed approach to obtain distinct effects on a future production of reusable water from hypersaline streams under somewhat soft working conditions and in full respect to environmental sustainability.

Analysis of the Influence of Process Parameters on the Properties of Homogeneous and Heterogeneous Membranes for Gas Separation

Heterogeneous membranes, otherwise known as Mixed Matrix Membranes (MMMs), which are used in gas separation processes, are the subject of growing interest. This is due to their potential to improve the process properties of membranes compared to those of homogeneous membranes, i.e., those made of polymer only. Using such membranes in a process involves subjecting them to varying temperatures and pressures. This paper investigates the effects of temperature and feed pressure on the process properties of homogeneous and heterogeneous membranes. Membranes made of Pebax^®2533 copolymer and containing additional fillers such as SiO₂, ZIF-8, and POSS-Ph were investigated. Tests were performed over a temperature range of 25-55 °C and a pressure range of 2-8 bar for N₂, CH₄, and CO₂ gases. It was found that temperature positively influences the increase in permeability, while pressure influences permeability depending on the gas used, which is related to the effect of pressure on the solubility of the gas in the membrane.

Propriedades mecânicas e molhabilidade de filmes de zeínas extraídas de glúten de milho

Zeínas são proteínas de reserva do milho (prolaminas), que podem ser extraídas através de solubilização em meio alcoólico. Essas proteínas são altamente hidrofóbicas, com elevado grau de polimerização. Neste estudo, zeínas do tipo a (massa molecular entre 10 e 22 kDa) foram extraídas do glúten do milho e caracterizadas com respeito às suas principais bandas de absorção espectroscópica na região do infravermelho. Blendas de zeínas com ácido oléico (AO) como plastificante foram avaliadas em diversas proporções e filmes processados por casting sobre superfície apolar. Filmes de zeínas sem plastificante mostraram-se inviáveis para manipulação e medidas, mas a adição de 1 e 2% em massa de AO proporcionou um significativo aumento do módulo de elasticidade, segundo análise realizada por DMA. A presença de plastificante introduz também irregularidades superficiais e leva a uma perda das características hidrofóbicas dessas proteínas.

Pure and Modified Co-Poly(amide-12-b-ethylene oxide) Membranes for Gas Separation Studied by Molecular Investigations

This paper deals with a theoretical investigation of gas transport properties in a pure and modified PEBAX block copolymer membrane with N-ethyl-o/p-toluene sulfonamide (KET) as additive molecules. Molecular dynamics simulations using COMPASS force field, Gusev-Suter Transition State Theory (TST) and Monte Carlo methods were used. Bulk models of PEBAX and PEBAX/KET in different copolymer/additive compositions were assembled and analyzed to evaluate gas permeability and morphology to characterize structure-performance relationships.

Intermolecular Interactions as Controlling Factor for Water Sorption into Polymer Membranes

A multidisciplinary approach was used for delineating the mechanisms controlling water sorption into modified block co-poly-(ether/amide) (PEBAX) membranes. In particular, incorporation of aromatic sulfonamide (KET) into the polymer matrix led to a nonlinear increase of water sorption in the membrane. The modification in sorption was accompanied by a nonlinear behavior in membrane surface energies. Infrared analysis revealed a different availability and accessibility of free polar groups supporting the formation of hydrogen bonding as a function of modifier concentration. A combination of both experimental and theoretical procedures was used to analyze the molecular processes of water sorption on PEBAX membranes. Molecular dynamics (MD) and quantum chemical (QC) calculations demonstrated that the formation of KET-KET dimers in the polymeric matrix led to a decrease in the interaction energy between water and modifiers. In addition, no variations in the dipole moments of water-dimer structures were found in comparison to a single KET and water-KET molecule. The formation of water-dimer complexes at higher concentration of modifier decreases the number of the dipole moment, thus preventing the polarization of polymer chains.

Study of the surface character as responsible for controlling interfacial forces at membrane–feed interface

The role of the interfacial forces was emphasized in interactive processes, involving membrane surface and penetrating molecules. The surface character controlling the dissolution process of some species (CO2, H2O, C3H6O2, C4H8O2, C5H10O2) was evaluated in relation to the supra-molecular chemistry of membranes based on 80PTMO/PA12. Infrared analyses combined with the estimation of the hydrophilic and hydrophobic domains of the membrane surface yielded useful information about the distribution, availability and accessibility of the polar moieties responsible for the penetrant sorption. At the interface, attractive Lewis acid/base interactions such as H-bonding directed the sorption of vapor species into the membranes, whereas quadrupolar CO2 participated in specific Lifshitz-van der Waals interactions with the modified polymers. In both the cases, the presence of additional polar moieties such as carbonyl, sulfonamide, and hydroxyl groups enhanced the affinity of the Pebax-based membranes for the penetrating species considered in this work. As a result, the quantification of the reactivity of a membrane surface for specific molecules may allow predictive models to be constructed and selective membranes to be designed.