Design of water-soluble block copolymers containing poly(4-vinylpyridine) by atom transfer radical polymerization

A block copolymer templated approach for the preparation of nanoporous polymer structures and cellulose fiber hybrids by ozone treatment

Porous nanostructures were derived after self-assembly of amphiphilic block copolymers and subsequent ozone-mediated block segment degradation. Highly ordered pores were obtained for BCP films and for coatings at cellulose fibers’ surfaces.

Electrospun Fibrous Mat with pH-Switchable Superwettability That Can Separate Layered Oil/Water Mixtures

Oil/water separation has inspired much research interest because of the damages caused to our natural environment due to oily wastewater. As a leader of advanced separation materials, electrospun polymeric fibrous mats having the properties of special surface wettability, high specific surface area, and high porosity will be a good membrane material for the separation of oily wastewater. Herein, we first prepared pH-responsive polymer poly(dimethylsiloxane)-block-poly(4-vinylpyridine) (PDMS-b-P4VP) mat using electrospinning technology. The PDMS-b-P4VP fibrous mat with a thickness of around 250 μm exhibits good pH-switchable oil/water wettability and is able to effectively separate oil or water from layered oil/water mixtures by gravity driven through adjusting the pH value. Stemming from its porous structure and pH-switchable superwettability, the electrospun PDMS-b-P4VP fibrous mat achieved controllable separations with high fluxes of approximately 9000 L h^-1 m^-2 for oil (hexane) and 27 000 L h^-1 m^-2 for water. In addition, extended studies on the polymer/silica nanoparticulate (silica NP) composite fibrous mats show that the addition of an inorganic component improves the thermal stability, pH-switchable wettability, and separation performance of the fibrous mats (approximately 9000 L h^-1 m^-2 for hexane and 32 000 L h^-1 m^-2 for water). It can be concluded from the results that both polymer fibrous mats and silica-filled composite fibrous mats are good candidates for on-demand layered oil/water mixture separation.

Smart Fiber Membrane for pH-Induced Oil/Water Separation

Wastewater contaminated with oil or organic compounds poses threats to the environment and humans. Efficient separation of oil and water are highly desired yet still challenging. This paper reports the fabrication of a smart fiber membrane by depositing pH-responsive copolymer fibers on a stainless steel mesh through electrospinning. The cost-effective precursor material poly(methyl methacrylate)-block-poly(4-vinylpyridine) (PMMA-b-P4VP) was synthesized using copper(0)-mediated reversible-deactivation radical polymerization. The pH-responsive P4VP and the underwater oleophilic/hydrophilic PMMA confer the as-prepared membrane with switchable surface wettability toward water and oil. The three-dimensional network structure of the fibers considerably strengthens the oil/water wetting property of the membrane, which is highly desirable in the separation of oil and water mixtures. The as-prepared fiber membrane accomplishes gravity-driven pH-controllable oil/water separations. Oil selectively passes through the membrane, whereas water remains at the initial state; after the membrane is wetted with acidic water (pH 3), a reverse separation is realized. Both separations are highly efficient, and the membrane also exhibits switchable wettability after numerous cycles of the separation process. This cost-effective and easily mass-produced smart fiber membrane with excellent oil-fouling repellency has significant potential in practical applications, such as water purification and oil recovery.

Surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles

This review summarizes recent progress in surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles.

Layer by layer H-bonded assembly of P4VP with various hydroxylated PPFS: impact of the donor strength on growth mechanism and surface features

Hydrogen bond mediated films made by step by step deposition of poly(4-vinylpyridine) (P4VP) and hydroxylated poly(2,3,4,5,6-pentafluorostyrene) (PPFS) copolymers prepared by thiol para-fluoro coupling, bearing either one (PPFSME) or two (PPFSMPD) hydrogenated hydroxyl groups or a (poly)fluorinated hydroxyl (PPFSOH), respectively, were successfully constructed. The influence of the structural parameters, such as the hydroxyl environment (which dictates the H-bond strength) was in-depth investigated in terms of their impact on (i) growth mechanism, (ii) internal organization, and (iii) surface features. The use of the weaker H-bond donor partner (PPFSME) leads to low quality films composed of irregularly distributed aggregates. While [PPFSMPD/P4VP] multilayer films are comparatively thick and composed of stratified layers with smooth topology, the use of PPFSOH with P4VP yields thin films made of mixed and interpenetrated polymer layers. Playing on the interaction strength appears as a powerful tool to elaborate tailored multilayer films with molecularly tunable properties.

Novel nanoaggregates with peripheric superparamagnetic iron oxide nanoparticles and organic cores through self-assembly of tailor-made block copolymers

Well-defined magnetic nanovesicles are obtained through self-assembly of double hydrophilic PEG–PDMAEMA block copolymers and oleic-coated iron oxide nanoparticles.

Functional Polyether-based Amphiphilic Block Copolymers Synthesized by Atom-transfer Radical Polymerization

This review deals with the synthesis, physical properties, and applications of amphiphilic block copolymers based on hydrophilic poly(ethylene oxide) (PEO) or hydrophobic poly(propylene oxide) (PPO). Oligomeric PEO and PPO are frequently functionalized by converting their OH end groups into macroinitiators for atom-transfer radical polymerization. They are then used to generate additional blocks as part of complex copolymer architectures. Adding hydrophobic and hydrophilic blocks, respectively, leads to polymers with amphiphilic character in water. They are surface active and form micelles above a critical micellization concentration. Together with recent developments in post-polymerization techniques through quantitative coupling reactions (‘click’ chemistry) a broad variety of tailored functionalities can be introduced to the amphiphilic block copolymers. Examples are outlined including stimuli responsiveness, membrane penetrating ability, formation of multi-compartmentalized micelles, etc.

A novel and universal route to SiO2-supported organic/inorganic hybrid noble metal nanomaterials via surface RAFT polymerization

Polymer-encapsulated gold or silver nanoparticles were synthesized and sterically stabilized by a shell layer of poly(4-vinylpyridine) (P4VP) grafted on SiO(2) nanoparticles that acts as a scaffold for the synthesis of hybrid noble metal nanomaterials. The grafting P4VP shell was synthesized via surface reversible addition-fragmentation chain transfer (RAFT) polymerization of 4-vinylpyridine (4VP) using SiO(2)-supported benzyl 9H-carbazole-9-carbodithioate (SiO(2)-BCBD) as the RAFT agent. The covalently tethered P4VP shell can coordinate with various transition metal ions such as Au(3+) or Ag(+) and therefore stabilize the corresponding Au or Ag nanoparticles reduced in situ by sodium borohydride (NaBH(4)) or trisodium citrate. The SiO(2)-supported RAFT agent and the Au or Ag nanoparticles embedded in the P4VP shell layer were characterized by UV-vis spectrophotometer, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and surface-enhanced Raman spectroscopy (SERS).