Properties and preparation of compatibilized nylon 6 nanocomposites/ABS blends: Part II – Physical and thermal properties

Gelatin/Na2Ti3O7 Nanocomposite Scaffolds: Mechanical Properties and Characterization for Tissue Engineering Applications

Materials and manufacturing technologies are necessary for tissue engineering and developing temporary artificial extracellular matrices. In this study, scaffolds were fabricated from freshly synthesized titanate (Na₂Ti₃O₇) and its precursor titanium dioxide and their properties were investigated. The scaffolds with improved properties were then mixed with gelatin to form a scaffold material using the freeze-drying technique. To determine the optimal composition for the compression test of the nanocomposite scaffold, a mixture design with three factors of gelatin, titanate, and deionized water was used. Then, the scaffold microstructures were examined by scanning electron microscopy (SEM) to determine the porosity of the nanocomposite scaffolds. The scaffolds were fabricated as a nanocomposite and determined their compressive modulus values. The results showed that the porosity of the gelatin/Na₂Ti₃O₇ nanocomposite scaffolds ranged from 67% to 85%. When the mixing ratio was 100:0, the degree of swelling was 22.98%. The highest swelling ratio of 85.43% was obtained when the freeze-drying technique was applied to the mixture of gelatin and Na₂Ti₃O₇ with a mixing ratio of 80:20. The specimens formed (gelatin:titanate = 80:20) exhibited a compressive modulus of 30.57 kPa. The sample with a composition of 15.10% gelatin, 2% Na₂Ti₃O₇, and 82.9% DI water, processed by the mixture design technique, showed the highest yield of 30.57 kPa in the compression test.

Preparation and Properties of Metallocene-catalyzed PE/Starch Nanocomposites: Role of Nanocompatibilizer

The properties of metallocene catalyzed polyethylene (mPE)/starch blends and nanocomposites containing mPE-g-maleic anhydride (mPE-g-MA) compatibilizer, reinforced with 1 phr commercial organoclay (20A) at various amounts of pristine starch are discussed. The results from X-ray diffraction (XRD) and transmission electron microscope (TEM) experiments revealed that nanocomposites were achieved in all cases. No observable diffraction peaks in the low angle region were detected. Clay was preferentially located within the mPE and starch interface and the mPE matrix. The crystallization temperatures of nanocomposites increased with the addition of clay acting as a nucleating agent. However, the melting temperatures and the glass transition temperatures remained largely unchanged. Clay incorporation provided a heat barrier that profoundly increased the blend thermal stability. A maximum increase in tensile strength and Young's modulus was obtained, up to 60% and 105%, respectively, using nanoclay reinforced compatibilizer (termed nanocompatibilizer) in comparison with neat compatibilizer for pristine starch filled cases. Slightly lower water absorption capability was observed for nanocompatibilizer reinforced cases through the sheet-like structure of clay compared with neat compatibilizer cases.