Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Non-Isothermal Crystallization Kinetics of Poly(ethylene glycol) and Poly(ethylene glycol)-B-Poly(ε-caprolactone) by Flash DSC Analysis

The non-isothermal crystallization behaviors of poly (ethylene glycol) (PEG) and poly (ethylene glycol)-b-poly(ε-caprolactone) (PEG-PCL) were investigated through a commercially available chip-calorimeter Flash DSC2+. The non-isothermal crystallization data under different cooling rates were analyzed by the Ozawa model, modified Avrami model, and Mo model. The results of the non-isothermal crystallization showed that the PCL block crystallized first, followed by the crystallization of the PEG block when the cooling rate was 50-200 K/s. However, only the PEG block can crystallize when the cooling rate is 300-600 K/s. The crystallization of PEG-PCL is completely inhibited when the cooling rate is 1000 K/s. The modified Avrami and Ozawa models were found to describe the non-isothermal crystallization processes well. The growth methods of PEG and PEG-PCL are both three-dimensional spherulitic growth. The Mo model shows that the crystallization rate of PEG is greater than that of PEG-PCL.

Formation of well-organized, concentric-ringed spherulites of four-arm star symmetric PEO-b-PCL via confined evaporative crystallization

Toluene solvent-assisted topology confinement facilitates PCL block templated rhythmic crystallization into concentric-ringed spherulites of star symmetric P(EO_2.5k-b-CL_2.7k)₄.

Ring opening copolymerization of ε-caprolactone and diselenic macrolide carbonate for well-defined poly(ester-co-carbonate): kinetic evaluation and ROS/GSH responsiveness

Theoretical calculations agreed well with the experimental results. The competitive mechanism was proposed to clarify the composition and structure of the copolymers.

Tailoring the degradation and mechanical properties of poly(ε-caprolactone) incorporating functional ε-caprolactone-based copolymers

Functional block copolymers (COPs) were synthesized through the ring-opening polymerization, and the effects of COPs on the hydrolytic & oxidative degradation and mechanical properties of PCL/COP composites were studied.

Comparison of poly(ε-caprolactone) chain lengths of poly(ε-caprolactone)-co-d-α-tocopheryl-poly(ethylene glycol) 1000 succinate nanoparticles for enhancement of quercetin delivery to SKBR3 breast cancer cells

This study aimed to investigate the effect of the different hydrophobic chain lengths of poly(ε-caprolactone)-co-d-α-tocopheryl polyethylene glycol 1000 succinate (P(CL)-TPGS) copolymers on the nanoparticle properties and delivery efficiency of quercetin to SKBR3 breast cancer cells. The 5:1, 10:1 and 20:1 P(CL)-TPGS copolymers were fabricated and found to be composed of 25.0%, 45.2% and 66.8% of hydrophobic P(CL) chains with respect to the polymer chain, respectively. The DSC measurement indicated the microphase separation of P(CL) and TPGS segments. The crystallization of P(CL) segment occurred when the P(CL) chain was higher than 25% due to the restricted mobility of P(CL) by TPGS. The longer P(CL) chain had the higher crystallinity while decreasing the crystallinity of TPGS segment. The increasing P(CL) chain length increased the particle size of P(CL)-TPGS nanoparticles from 20 to 205 nm and enhanced the loading capacity of quercetin due to the more hydrophobicity of the nanoparticle core. The release of quercetin was retarded by an increase in P(CL) chain length associated with the increasing hydrophobicity and crystallinity of P(CL)-TPGS copolymers. The P(CL)-TPGS nanoparticles potentiated the toxicity of quercetin to SKBR3 cells by at least 2.9 times compared to the quercetin solution. The cellular uptake of P(CL)-TPGS nanoparticles by SKBR3 cells occurred through cholesterol-dependent endocytosis. The 10:1 P(CL)-TPGS nanoparticles showed the highest toxicity and uptake efficiency and could be potentially used for the delivery of quercetin to breast cancer cells.

Biodegradable poly(ethylene glycol)–poly(ε-carprolactone) polymeric micelles with different tailored topological amphiphilies for doxorubicin (DOX) drug delivery

The self-assembly and drug release of the three PEG–PCL copolymers with different topologies but identical molar ratio between PEG to PCL.

Safety of bioabsorbable implants in vitro

Background

The aim of the present study was to investigate the safety of bioabsorbable plates and screws in humans.

Methods

For this purpose, an implant system based on [poly(lactic-co-glycolic acids)(85:15)] was designed. The system was tested for pH, temperature, and swelling and then its surface morphology was analyzed for surface porosity using environmental electron microscopy. Then, the effects of this bioabsorbable system on the viability and profileration of osteocytes were examined on a molecular level via in vitro experiments. A [poly(lactic-co-glycolic acids)(90:10)] bioabsorbable implant, which is commercially available and used in orthopedic surgery, was used as control group. For the statistical evaluation of the data obtained in the present study, the groups were compared by Tukey HSD test following ANOVA. The significance level was set as p < 0.05.

Results

It was observed that the osteocytes cultivated on the PLGA system designed in the present study included more live cells and allowed more proliferation compared to the control.

Conclusion

One of the criteria in the selection of implants for orthopedic surgery is that a good implant should not need removal and thus a second surgery. In the present study, a bioabsorbable implant was designed considering this criterion. The present study is the first step to prove the safety of this new design by in vitro toxicity and viability experiments.

Catalyst-Free Plasma-Assisted Copolymerization of Poly(ε-caprolactone)-poly(ethylene glycol) for Biomedical Applications

Catalyst-free ring-opening polymerization (ROP) strategy was developed to overcome the disadvantage of incomplete and expensive removal of catalyst used during the multistep wet chemical processes. Nano-sized biocompatible and low molecular weight poly(ε-carolactone)-poly(ethylene glycol) (PCL-PEG) copolymer coatings were deposited via a single-step, low-pressure, pulsed-plasma polymerization process. Experiments were performed at different monomer feed ratio and effective plasma power. The coatings were analyzed by XPS, as well as MALDI ToF. Ellipsometric measurement showed deposition rates ranging from 1.3 to 3 nm/min, depending on the ratio of the PCL/PEG precursors introduced in the reactor. Our results have demonstrated that plasma copolymerized PCL-PEG coatings can be tailored in such a way to be cell adherent, convenient for biomedical implants such as artificial skin substrates, or cell repellent, which can be used as antibiofouling surfaces for urethral catheters, cardiac stents, and so on. The global objective of this study is to tailor the surface properties of PCL by copolymerizing it with PEG in the pulsed plasma environment to improve their applicability in tissue engineering and biomedical science.

Fine tuning micellar core-forming block of poly(ethylene glycol)-block-poly(ε-caprolactone) amphiphilic copolymers based on chemical modification for the solubilization and delivery of doxorubicin

This study aimed to optimize poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-b-PCL)-based amphiphilic block copolymers for achieving a better micellar drug delivery system (DDS) with improved solubilization and delivery of doxorubicin (DOX). First, the Flory-Huggins interaction parameters between DOX and the core-forming segments [i.e., poly(ε-caprolactone) (PCL) and poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (P(CL-co-CABCL))] was calculated to assess the drug-polymer compatibility. The results indicated a better compatibility between DOX and P(CL-co-CABCL) than that between DOX and PCL, motivating the synthesis of monomethoxy-poly(ethylene glycol)-b-poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (mPEG-b-P(CL-co-CABCL)) block copolymer. Second, two novel block copolymers of mPEG-b-P(CL-co-CABCL) with different compositions were prepared via ring-opening polymerization of CL and CABCL using mPEG as a macroinitiator and characterized by (1)H NMR, FT-IR, GPC, WAXD, and DSC techniques. It was found that the introduction of CABCL decreased the crystallinity of mPEG-b-PCL copolymer. Micellar formation of the copolymers in aqueous solution was investigated with fluorescence spectroscopy, DLS and TEM. mPEG-b-P(CL-co-CABCL) copolymers had a lower critical micelle concentration (CMC) than mPEG-b-PCL and subsequently led to an improved stability of prepared micelles. Furthermore, both higher loading capacity and slower in vitro release of DOX were observed for micelles of copolymers with increased content of CABCL, attributed to both improved drug-core compatibility and favorable amorphous core structure. Meanwhile, DOX-loaded micelles facilitated better uptake of DOX by HepG2 cells and were mainly retained in the cytosol, whereas free DOX accumulated more in the nuclei. However, possibly because of the slower intracellular release of DOX, DOX-loaded micelles were less potent in inhibiting cell proliferation than free DOX in vitro. Taken together, the introduction of CABCL in the core-forming block of mPEG-b-PCL resulted in micelles with superior properties, which hold great promise for drug delivery applications.

Preparation and characterization of thermosensitive pluronic F127-b-poly(ɛ-caprolactone) mixed micelles

The mixed micelles composed of pluronic F127-b-poly(ɛ-caprolactone) (F127-CL) and bovine serum albumin (BSA) or polylactic acid (PLA) were fabricated for application as promising drug carriers. F127-CL copolymers were characterized by (1)H NMR, FT-IR, GPC, DSC, XRD and POM. They can self-assemble into micelles in water by solvent evaporation method. The thermo-responsivities of the pure and mixed micelles were investigated. The drug release behaviors were investigated in phosphate-buffered solution (PBS) and acetate buffer solution (ABS), respectively, at 37°C. The hemolysis and coagulation assay and the tumor cell growth inhibition assays were further evaluated. The morphologies of pure micelles underwent from the coexistence of the rods and spheres to the spheres with increasing the lengths of CL. The micelle behaviors were influenced with the addition of BSA and PLA. Both pure and mixed micelles of F127-CL with CL length of 200 show thermo-responsivities from 25 to 45°C, while form larger aggregations at high temperature. The hemolysis and coagulation assays showed that the micelles possess good blood compatibility. The cytotoxicity results showed that the copolymer was a safe carrier and the encapsulated doxorubicind.HCl remained its potent anti-tumor effect. The in vitro release profiles displayed a sustained release of DOX.HCl from the micelles. The block copolymers can be great potential as a nanocontainer in drug delivery systems.