Evaluation of the cytocompatibility of butanediamine- and RGDS-grafted poly(dl-lactic acid)

Adsorption Force of Fibronectin: A Balance Regulator to Transmission of Cell Traction Force and Fluid Shear Stress

Osteoblasts actively generate cell traction force (CTF) to sense chemical and mechanical microenvironments. Fluid shear stress (FSS) is a principle mechanical stimulus for bone modeling/remodeling. FSS and CTF share common interconnected elements for force transmission, among which the role of the protein-material interfacial force (F_ad) remains unclear. Here, we found that, on the low F_ad surface (5.47 ± 1.31 pN/FN), CTF overwhelmed F_ad to partially desorb FN, and FSS exacerbated the desorption, resulting in disassembly of the actin cytoskeleton and focal adhesions (FAs) to reduce CTF and establishment of a new mechanical balance at the FN-material interface. Contrarily, on the high F_ad surface (27.68 ± 5.24 pN/FN), pure CTF or the combination of CTF and FSS induced no FN desorption, and FSS promoted assembly of actin cytoskeletons and disassembly of FAs, regaining new mechanical balance at the cell-FN interface. These results indicate that F_ad is a mechanical regulator for transmission of CTF and FSS, which has never been reported before.

Atmospheric pressure cold plasma versus wet-chemical surface treatments for carboxyl functionalization of polylactic acid: A first step toward covalent immobilization of bioactive molecules

The use of polylactic acid (PLA) has attracted growing interest, particularly in recent years, for biomedical applications because of its mechanical properties, biocompatibility, and biodegradability. Despite this, features such as surface hydrophobicity and the absence of suitable functional groups for covalent immobilization of bioactive molecules, make it challenging to endow PLA-based medical devices with additional features and thus broaden their range of applicability. In the present study, we demonstrate the suitability of atmospheric pressure dielectric barrier discharges operating in the Townsend regime as a promising alternative to other surface treatments, such as diazonium and alkali hydrolytic treatments, for carboxyl functionalization of PLA. Chemical changes in PLA surfaces are evaluated by contact angle measurements and by X-ray photoelectron spectroscopy while physical changes are investigated by scanning electron microscopy and atomic force microscopy. The amount of carboxyl groups generated on PLA surfaces is assessed by toluidine blue O assay and substantiated by grafting, through carboxyl groups, a fluorescent probe containing amino functionalities. All of the surface treatments have proven to be very effective in generating carboxylic groups on the PLA surface. Nevertheless, plasma treatment is shown to not degrade the PLA surface, in sharp contrast with diazonium and alkali hydrolytic treatments.

Synthesis and characterization of biodegradable linear shape memory polyurethanes with high mechanical performance by incorporating novel long chain diisocyanates

Novel long chain diisocyanates were developed for synthesis of biodegradable linear shape memory polyurethanes demonstrating high mechanical performance.

Design and evaluation of chitosan/poly(l-lactide)/pectin based composite scaffolds for cartilage tissue regeneration

Poor regenerative potential of cartilage tissue due to the avascular nature and lack of supplementation of reparative cells impose an important challenge in recent medical practice towards development of artificial extracellular matrix with enhanced neo-cartilage tissue regeneration potential. Chitosan (CH), poly (l-lactide) (PLLA), and pectin (PC) compositions were tailored to generate polyelectrolyte complex based porous scaffolds using freeze drying method and crosslinked by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), N-hydroxysuccinimide (NHS) solution containing chondroitin sulfate (CS) to mimic the composition as well as architecture of the cartilage extracellular matrix (ECM). The physical, chemical, thermal, and mechanical behaviors of developed scaffolds were done. The scaffolds were porous with homogeneous pore structure with pore size 49-170μm and porosities in the range of 79 to 84%. Fourier transform infrared study confirmed the presence of polymers (CH, PLLA and PC) within the scaffolds. The crystallinity of the scaffold was examined by the X-ray diffraction studies. Furthermore, scaffold shows suitable swelling property, moderate biodegradation and hemocompatibility in nature and possess suitable mechanical strength for cartilage tissue regeneration. MTT assay, GAG content, and attachment of chondrocyte confirmed the regenerative potential of the cell seeded scaffold. The histopathological analysis defines the suitability of scaffold for cartilage tissue regeneration.

The collective influence of 1, 25-dihydroxyvitamin D3 with physiological fluid shear stress on osteoblasts

1, 25-dihydroxyvitamin D₃ (1, 25 (OH)₂ D₃) and mechanical stimuli in physiological environment contributes greatly to osteoporosis pathogenesis. Wide investigations have been conducted on how 1, 25-dihydroxyvitamin D₃ and mechanical stimuli separately impact osteoblasts. This study reports the collective influences of 1, 25-dihydroxyvitamin D₃ and flow shear stress (FSS) on biological functions of osteoblasts. 1, 25 (OH)₂ D₃ were prepared in various kinds of concentrations (0, 1, 10, 100 nmmol/L), while physiological fluid shear stress (12 dynes/cm²) was produced by using a parallel-plate fluid flow system. 1, 25 (OH)₂ D₃ affects the responses of ROBs to FSS, including the inhibition of NO release and cell proliferation as well as the promotion of PGE₂ release and cell differentiation. These findings provide a possible mechanism by which 1, 25(OH)₂ D₃ influences osteoblasts' responses to FSS, thus most probably providing guidance for the selection of 1, 25(OH)₂ D₃ concentration and mechanical loading in order to produce functional bone tissues in vitro.

The interfacial pH of acidic degradable polymeric biomaterials and its effects on osteoblast behavior

A weak alkaline environment is established to facilitate the growth of osteoblasts. Unfortunately, this is inconsistent with the application of biodegradable polymer in bone regeneration, as the degradation products are usually acidic. In this study, the variation of the interfacial pH of poly (D, L-lactide) and piperazine-based polyurethane ureas (P-PUUs), as the representations of acidic degradable materials, and the behavior of osteoblasts on these substrates with tunable interfacial pH were investigated in vitro. These results revealed that the release of degraded products caused a rapid decrease in the interfacial pH, and this could be relieved by the introduction of alkaline segments. On the contrary, when culturing with osteoblasts, the variation of the interfacial pH revealed an upward tendency, indicating that cell could construct the microenvironment by secreting cellular metabolites to satisfy its own survival. In addition, the behavior of osteoblasts on substrates exhibited that P-PUUs with the most PP units were better for cell growth and osteogenic differentiation of cells. This is due to the hydrophilic surface and the moderate N% in P-PUUs, key factors in the promotion of the early stages of cellular responses, and the interfacial pH contributing to the enhanced effect on osteogenic differentiation.

Surface chemistry regulates the sensitivity and tolerability of osteoblasts to various magnitudes of fluid shear stress

Scaffolds provide a physical support for osteoblasts and act as the medium to transfer mechanical stimuli to cells. To verify our hypothesis that the surface chemistry of scaffolds regulates the perception of cells to mechanical stimuli, the sensitivity and tolerability of osteoblasts to fluid shear stress (FSS) of various magnitudes (5, 12, 20 dynes/cm² ) were investigated on various surface chemistries (-OH, -CH₃ , -NH₂ ), and their follow-up effects on cell proliferation and differentiation were examined as well. The sensitivity was characterized by the release of adenosine triphosphate (ATP), nitric oxide (NO) and prostaglandin E₂ (PGE₂ ) while the tolerability was by cellular membrane integrity. The cell proliferation was characterized by S-phase cell fraction and the differentiation by ALP activity and ECM expression (fibronectin and type I collagen). As revealed, osteoblasts demonstrated higher sensitivity and lower tolerability on OH and CH₃ surfaces, yet lower sensitivity and higher tolerability on NH₂ surfaces. Observations on the focal adhesion formation, F-actin organization and cellular orientation before and after FSS exposure suggest that the potential mechanism lies in the differential control of F-actin organization and focal adhesion formation by surface chemistry, which further divergently mediates the sensitivity and tolerability of ROBs to FSS and the follow-up cell proliferation and differentiation. These findings are essentially valuable for design/selection of desirable surface chemistry to orchestrate with FSS stimuli, inducing appropriate cell responses and promoting bone formation. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2978-2991, 2016.

The optimal combination of substrate chemistry with physiological fluid shear stress

Osteoblasts on implanted biomaterials sense both substrate chemistry and mechanical stimulus. The effects of substrate chemistry alone and mechanical stimulus alone on osteoblasts have been widely studied. This study investigates the optimal combination of substrate chemistry and 12dyn/cm(2) physiological flow shear stress (FSS) by examining their influences on primary rat osteoblasts (ROBs), including the releases of ATP, nitric oxide (NO), and prostaglandin E2 (PGE2). Self-assembled monolayers (SAMs) on glass slides with -OH, -CH3, and -NH2 were employed to provide various substrate chemistries, whereas a parallel-plate fluid flow system produced the physiological FSS. Substrate chemistry alone exerted no observable effects on the releases of ATP, NO, and PGE2. Nevertheless, when ROBs were exposed to both substrate chemistry and FSS, the ATP releases of NH2 were upregulated about 12-fold compared to substrate chemistry alone, while the ATP releases of CH3 and OH was similarly increased 7-fold at the peak. Similar trends were observed for the releases of NO and PGE2. The expressions of ATP, NO, and PGE2 followed the pattern of NH2-FSS>Glass-FSS>CH3-FSS≈OH-FSS. ROBs on NH2 produced the optimal combination of substrate chemistry with the physiological FSS. The F-actin organization and focal adhesion (FA) formation of ROBs on various SAMs without FSS were examined. NH2 produced the best results whereas CH3 and OH produced the worst ones. Inhibition of FAs and/or disruption of F-actin significantly decreased the releases of FSS-induced PGE2, NO, and/or ATP. Consequently, a mechanism was proposed that the best F-actin organization and FA formation of ROBs on NH2 lead to the optimal combination of substrate chemistry with the 12dyn/cm(2) physiological FSS. This mechanism gives guidance for the design of implanted biomaterials and bioreactors for bone tissue engineering.