Regularly alternating poly(amideimide)s containing pendent pentadecyl chains: Synthesis and characterization

Synthesis and characterization of polyhydrazides and poly(1,3,4-oxadiazole)s containing multiple arylene ether linkages and pendent pentadecyl chains

A new diacylhydrazide monomer, namely, 4-(4-(4-(4-(hydrazinocarbonyl)phenoxy)-2-pentadecylphenoxy)phenoxy) benzohydrazide (HPPDPB), was synthesized starting from 4-(4-hydroxyphenoxy)-3-pentadecylphenol. HPPDPB was polycondensed with terephthalic acid chloride (TPC), isophthalic acid chloride (IPC) and a mixture of TPC and IPC (50:50 mol%) to obtain polyhydrazides containing multiple arylene ether linkages in the backbone and pendent pentadecyl chains. Polyhydrazides were subsequently cyclized in the presence of phosphorus oxychloride to obtain the corresponding poly(1,3,4-oxadiazole)s. Polyhydrazides and poly(1,3,4-oxadiazole)s exhibited inherent viscosities in the range 0.65–0.72 dL g−1 and 0.54–0.62 dL g−1, respectively, which indicated the formation of reasonably high-molecular weight polymers. Polyhydrazides were soluble in polar aprotic solvents such as N,N-dimethylformamide, N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidinone and pyridine whereas poly(1,3,4-oxadiazole)s exhibited excellent solubility even in common organic solvents such as chloroform, dichloromethane and tetrahydrofuran. Tough, transparent and flexible films of polyhydrazides and poly(1,3,4-oxadiazole)s could be cast from DMAc and chloroform solutions, respectively. X-Ray diffraction studies revealed amorphous nature of polyhydrazides and poly(1,3,4-oxadiazole)s and the formation of layered structure was observed due to ordered packing of pentadecyl chains. The 10% decomposition temperature ( T10) values for poly(1,3,4-oxadiazole)s were in the range 425–440°C indicating their good thermal stability. Glass transition temperature ( Tg) values of polyhydrazides and poly(1,3,4-oxadiazole)s were in the range 175–192°C and 92–103°C, respectively. The excellent solubility characteristics and the large gap between Tg (92–103°C) and T10 (425–440°C) values give poly(1,3,4-oxadiazole)-containing pendent pentadecyl chains better opportunities for processability.

New organosoluble aromatic poly(esterimide)s containing pendent pentadecyl chains

A new diimide dicarboxylic acid, namely 2,2′-(4-pentadecyl-1,3-phenylene)bis(1,3-dioxoisoindoline-5-carboxylic acid), containing preformed imide rings and pentadecyl chain, was synthesized by the reaction of 4-pentadecylbenzene-1,3-diamine with trimellitic anhydride. A series of new aromatic poly(esterimide)s (PEIs) was synthesized using diphenylchlorophosphate-activated direct polycondensation of 2,2′-(4-pentadecyl-1,3-phenylene)bis(1,3-dioxoisoindoline-5-carboxylic acid), with five commercially available bisphenols, namely 4,4′-isopropylidenediphenol (I), 4,4′-(hexafluoroisopropylidene)diphenol (II), 4,4′-oxydiphenol (III), 4,4′-biphenol (IV), and 4,4′-(9-fluorenylidene)diphenol (V) in the presence of pyridine and lithium chloride. Inherent viscosities of PEIs were in the range 0.54–0.83 dL g−1 in chloroform (CHCl3) at 30 ± 0.1°C. PEIs containing pendent pentadecyl chains were soluble in organic solvents such as CHCl3, m-cresol, N, N-dimethylacetamide, 1-methyl-2-pyrrolidinone, pyridine, and nitrobenzene. Tough, transparent, and flexible films of PEIs could be cast from their CHCl3 solutions. PEIs exhibited glass transition temperature in the range 145–198°C. The temperature at 10% weight loss of PEIs, determined by thermogravimetric analysis under the nitrogen atmosphere, was in the range of 450–470°C indicating good thermal stability.

Synthesis and characterization of new organosoluble aromatic polyamides and polyazomethines containing pendent pentadecyl chains

New aromatic polyamides and polyazomethines containing pendent pentadecyl chains were synthesized by polycondensation of pentadecylbenzene-1,3-diamine with (i) four commercially available aromatic diacids, viz., biphenyl-4,4′dicarboxylic acid, 4,4′-oxybisbenzoic acid, terephthalic acid and isophthalic acid, and (ii) dialdehydes, viz., terephthaldehyde, isophthaldehyde and a 50 : 50 mol% mixture of terephthaldehyde, and isophthaldehyde, respectively. Inherent viscosities of polyamides and polyazomethines were in the range 0.35–0.56 dL g−1 and 0.33–0.38 dL g−1, respectively, indicating the formation of medium molecular weight polymers. The presence of pendent pentadecyl chains in polyamides and polyazomethines led to an improvement in their solubility in organic solvents. Polyamides could be cast into flexible, transparent and tough films from their solution in N, N-dimethylacetamide while polyazomethines could be solution cast into transparent, flexible and stretchable films from their CHCl3 solution. 1H-NMR studies based on amide proton signals and azomethine proton signals indicated the presence of constitutional isomerism in the polyamides and polyazomethines. Wide-angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were amorphous in nature. X-ray diffractograms also displayed sharp reflections in the small angle region (2 θ ≈ 3°) indicating the formation of layered structure arising from packing of flexible pentadecyl chains. The glass transition ( Tg) temperatures of polyamides were in the range 169–215 °C while Tg values for polyazomethines were in the range 16–55 °C. The temperature for the 10% weight loss of polyamides and polyazomethines were in the range 430–460 °C and 425–440 °C, respectively, in a nitrogen atmosphere, which indicated their good thermal stability. Polyazomethines were also characterized by UV-Vis and photoluminescence spectroscopy and optical band gap ( Eg) values, calculated according to the maximum of the UV absorption, were found to be in the range 2.82–3.10 eV.