Copolymers derived from rapeseed derivatives via ADMET and thiol-ene addition

Alkylphthalides with intracellular triglyceride metabolism-promoting activity from the rhizomes of Cnidium officinale Makino

Methanol extract of the Cnidium officinale Makino rhizome, which is used as a crude drug Cnidium Rhizome (Cnidii Rhizoma; "Senkyu" in Japanese) and is listed in the Japanese Pharmacopoeia XVIII, showed intracellular triglyceride metabolism-promoting activity in high glucose-pretreated HepG2 cells. Thirty-five constituents, including two new alkylphthalide glycosides, senkyunosides A (1) and B (2), and a neolignan with a new stereoisomeric structure (3), were isolated in the extract. Their stereostructures were elucidated based on chemical and spectroscopic evidence. Among the isolates, several alkylphthalides, (Z)-3-butylidene-7-methoxyphthalide (9) and senkyunolides G (10), H (14), and I (15), and a polyacetylene falcarindiol (26), were found to show significant activity without any cytotoxicity at 10 μM.

Introducing the Reversible Reaction of CO2 with Diamines into Nonisocyanate Polyurethane Synthesis

Nonisocyanate polyurethanes (NIPUs) are considered greener alternatives to traditional polyurethanes, and the preparation of NIPUs considerably depends on the design and synthesis of suitable monomers. Herein, we propose a toolbox for in situ capturing and conversion of CO2 into α,ω-diene-functionalized carbamate monomers by taking advantage of the facile reversible reaction of CO2 with diamines in the presence of organic superbases. The activation of CO2 into carbamate intermedia was demonstrated by NMR and in situ FTIR, and the optimal conditions to prepare α,ω-diene-functionalized carbamate monomers were established. Thiol-ene and acyclic diene metathesis (ADMET) polymerization of these monomers under mild conditions yielded a series of poly(thioether urethane)s and unsaturated aromatic-aliphatic polyurethanes with high yield and glass transition temperatures ranging from -26.8 to -1.1 °C. These obtained NIPUs could be further modified via postpolymerization oxidation or hydrogenation to yield poly(sulfone urethane) and saturated polyurethane with tunable properties.

A Solvent-Free Approach to Crosslinked Hydrophobic Polymeric Coatings on Paper Using Vegetable Oil

Hydrophobic coatings are of utmost importance for many applications of paper-based materials. However, to date, most coating methods demand vast amounts of chemicals and solvents. Frequently, fossil-based coating materials are being used and multiple derivatization reactions are often required to obtain desired performances. In this work, we present a solvent-free paper-coating process, where olive oil as the main biogenic component is being used to obtain a hydrophobic barrier on paper. UV-induced thiol-ene photocrosslinking of olive oil was pursued in a solvent-free state at a wavelength of 254 nm without addition of photoinitiator. Optimum reaction conditions were determined in advance using oleic acid as a model compound. Paper coatings based on olive oil crosslinked by thiol-ene reaction reach water contact angles of up to 120°. By means of Fourier transform infrared spectroscopy and differential scanning calorimetry, a successful reaction and the formation of a polymer network within the coating can be proven. These results show that click-chemistry strategies can be used to achieve hydrophobic polymeric paper coatings while keeping the amount of non-biobased chemicals and reaction steps at a minimum.

Ferulic Acid as Building Block for the Lipase-Catalyzed Synthesis of Biobased Aromatic Polyesters

Enzymatic synthesis of aromatic biobased polyesters is a recent and rapidly expanding research field. However, the direct lipase-catalyzed synthesis of polyesters from ferulic acid has not yet been reported. In this work, various ferulic-based monomers were considered for their capability to undergo CALB-catalyzed polymerization. After conversion into diesters of different lengths, the CALB-catalyzed polymerization of these monomers with 1,4-butanediol resulted in short oligomers with a DP_n up to 5. Hydrogenation of the double bond resulted in monomers allowing obtaining polyesters of higher molar masses with DP_n up to 58 and M_w up to 33,100 g·mol⁻¹. These polyesters presented good thermal resistance up to 350 °C and T_g up to 7 °C. Reduction of the ferulic-based diesters into diols allowed preserving the double bond and synthesizing polyesters with a DP_n up to 19 and M_w up to 15,500 g·mol⁻¹ and higher T_g (up to 21 °C). Thus, this study has shown that the monomer hydrogenation strategy proved to be the most promising route to achieve ferulic-based polyester chains of high DP_n. This study also demonstrates for the first time that ferulic-based diols allow the synthesis of high T_g polyesters. Therefore, this is an important first step toward the synthesis of competitive biobased aromatic polyesters by enzymatic catalysis.

Thermally Reversible Polymeric Networks from Vegetable Oils

Low cross-link density thermally reversible networks were successfully synthesized from jatropha and sunflower oils. The oils were epoxidized and subsequently reacted with furfurylamine to attach furan groups onto the triglycerides, preferably at the epoxide sites rather than at the ester ones. Under the same reaction conditions, the modified jatropha oil retained the triglyceride structure more efficiently than its sunflower-based counterpart, i.e., the ester aminolysis reaction was less relevant for the jatropha oil. These furan-modified oils were then reacted with mixtures of aliphatic and aromatic bismaleimides, viz. 1,12-bismaleimido dodecane and 1,1'-(methylenedi-4,1-phenylene)bismaleimide, resulting in a series of polymers with T_g ranging between 3.6 and 19.8 °C. Changes in the chemical structure and mechanical properties during recurrent thermal cycles suggested that the Diels-Alder and retro-Diels-Alder reactions occurred. However, the reversibility was reduced over the thermal cycles due to several possible causes. There are indications that the maleimide groups were homopolymerized and the Diels-Alder adducts were aromatized, leading to irreversibly cross-linked polymers. Two of the polymers were successfully applied as adhesives without modifications. This result demonstrates one of the potential applications of these polymers.

Firmosides A and B: two new sucrose ferulates from the aerial parts of Silene firma and evaluation of radical scavenging activities

Two new tri-ferulates of sucrose, firmosides A and B (1 and 2, respectively), together with 18 known compounds (3-20), were isolated from the aerial parts of Silene firma. The structures of the isolated compounds were elucidated by various spectroscopic methods, including 1D, 2D NMR, and high-resolution electro-spray ionization-mass spectrometry (HR-ESI-MS). All the isolated compounds were evaluated for their free radical scavenging activity using 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical. As a result, two new compounds (1, 2) and 11 demonstrated significant radical scavenging activity, implying the usefulness as antioxidant agents.

Bright Side of Lignin Depolymerization: Toward New Platform Chemicals

Lignin, a major component of lignocellulose, is the largest source of aromatic building blocks on the planet and harbors great potential to serve as starting material for the production of biobased products. Despite the initial challenges associated with the robust and irregular structure of lignin, the valorization of this intriguing aromatic biopolymer has come a long way: recently, many creative strategies emerged that deliver defined products via catalytic or biocatalytic depolymerization in good yields. The purpose of this review is to provide insight into these novel approaches and the potential application of such emerging new structures for the synthesis of biobased polymers or pharmacologically active molecules. Existing strategies for functionalization or defunctionalization of lignin-based compounds are also summarized. Following the whole value chain from raw lignocellulose through depolymerization to application whenever possible, specific lignin-based compounds emerge that could be in the future considered as potential lignin-derived platform chemicals.

ADMET polymerization of biobased monomers deriving from syringaresinol

Renewable α,ω-dienes have been prepared from syringaresinol, a naturally occurring bisphenol deriving from sinapyl alcohol, and further studied as monomers in ADMET polymerizations.

Cure kinetics of exfoliated bio-based epoxy/clay nanocomposites developed from acrylated epoxidized castor oil and diglycidyl ether bisphenol A networks

A bio-based epoxy monomer was synthesized by acrylation of epoxidized castor oil (ECO). Subsequently, acrylated ECO (AECO)-toughened diglycidyl ether of bisphenol A (DGEBA) nanocomposites were prepared via sol–gel process with the addition of organically treated montmorillonite nanoclays. In this study, the curing kinetics of anhydride-cured DGEBA/AECO monomer with and without clays was studied by non-isothermal differential scanning calorimetry analysis. The apparent activation energy obtained by Flynn–Wall–Ozawa method was reduced from 63 to 59 kJ mol−1 and 69 to 61 kJ mol−1, respectively, with the addition of 1 wt% clay to the DGEBA/10 wt% AECO and DGEBA/20 wt% AECO systems, respectively. The two-parameter Šesták–Berggren autocatalytic model was used to obtain the reaction orders m and n, respectively. The curves obtained by the Málek method show good agreement with the experimental data for bio-based epoxy systems.

ADMET polymerization of bio-based biphenyl compounds

Bio-based phenols were dimerized and employed as monomers in ADMET polymerization.

Base catalyzed sustainable synthesis of phenyl esters from carboxylic acids using diphenyl carbonate

Phenyl esters were obtained in moderate to high yields by reaction of aliphatic and aromatic carboxylic acids with one equivalent of diphenyl carbonate in the presence of catalytic amounts of tertiary amine bases, under neat conditions at elevated temperatures (>100 °C).

Biobased building blocks for the rational design of renewable block polymers

Block polymers (BPs) derived from biomass (biobased) are necessary components of a sustainable future that relies minimally on petroleum-based plastics for applications ranging from thermoplastic elastomers and pressure-sensitive adhesives to blend compatibilizers. To facilitate their adoption, renewable BPs must be affordable, durable, processable, versatile, and reasonably benign. Their desirability further depends on the relative sustainability of the renewable resources and the methods employed in the monomer and polymer syntheses. Various strategies allow these BPs' characteristics to be tuned and enhanced for commercial applications, and many of these techniques also can be applied to manipulate the wide-ranging mechanical and thermal properties of biobased and self-assembling block polymers. From feedstock to application, this review article highlights promising renewable BPs, plus their material and assembly properties, in support of de novo design strategies that could revolutionize material sustainability.

Thiol–ene “click” reactions and recent applications in polymer and materials synthesis: a first update

This contribution serves as an update to a previous review (Polym. Chem.2010,1, 17–36) and highlights recent applications of thiol–ene ‘click’ chemistry as an efficient tool for both polymer/materials synthesis as well as modification.