Cellulose-g-PDMAam copolymers by controlled radical polymerization in homogeneous medium and their aqueous solution properties

Revolutionizing photocatalysis: Synthesis of innovative poly(N-tertiary-butylacrylamide)-graft-hydroxypropyl cellulose polymers for thermo-responsive applications via metal-free organic photoredox catalysis

In this study, we present a groundbreaking approach utilizing metal-free, visible light-mediated organic photoredox catalyzed atom transfer radical polymerization (O-ATRP) to synthesize cellulose-based stimuli-responsive polymers. Our method resulted in the successful synthesis of innovative metal-free poly(N-tertiary-butylacrylamide)-graft-hydroxypropyl cellulose (PNTBAM-g-HPC) polymers with exceptional control over molecular weight and narrow dispersity index (Đ) and explored their applications in organo-photocatalytic reactions. This approach addresses the limitations of traditional atom transfer radical polymerization method, which suffer from metal contamination and toxicity related problems. O-ATRP and organic photoredox catalysts have been sought to address these difficult challenges. In this study, we synthesized organic compound; 2,4,5,6-tetrakis(diphenylamino)isophthalonitrile (4DPIPN), which served as an organic photoredox catalyst, enabling the synthesis and application study of PNTBAM-g-HPC polymers via organic photoredox catalysis. Furthermore, by employing 4DPIPN, three different types of PNTBAM-g-HPC polymers were synthesized. Through thorough characterization techniques including FTIR, NMR, UV/Visible spectroscopy, TGA, and GPC analysis, we confirmed the successful synthesis of photocatalyst and three different types of PNTBAM-g-HPC polymers under O-ATRP conditions. By adjusting the molar ratios of PNTBAM side chains, we fine-tuned the LCST of HTA-20 polymers to 37.3 °C, demonstrating their thermoresponsive behavior. This synthetic approach shows great potential for applications in biosensors, pharmaceuticals, biomedical engineering, and drug delivery systems.

The synthesis of multifunctional cellulose graft alternating copolymers of 3,4-dihydrocoumarin and epoxides in DBU/DMSO/CO2 solvent system

Cellulose graft copolymers having well-defined structures could incorporate the characteristics of both the cellulose skeleton and side chains, providing a new method for the preparation functionalised cellulose derivatives. Herein, a series of multifunctional cellulose grafted, alternating 3,4-dihydrocoumarin (DHC) and epoxide (EPO) copolymers (cell-g-P(DHC-alt-EPO)) were prepared in a metal-free DBU/DMSO/CO2 solvent system without adding additional catalyst. Four examples of cell-g-P(DHC-alt-EPO) with tunable thermal and optical properties were synthesized by copolymerization of DHC with styrene oxide (SO), propylene oxide (PO), cyclohexene oxide (CHO) or furfuryl glycidyl ether (FGE) onto cellulose. The nonconjugated cell-g-P(DHC-alt-EPO) showed UV absorption properties with the maximum absorption peak at 282 nm and 295 nm and photoluminescence performance. A clustering-triggered emission mechanism was confirmed and consistent with DFT theoretical calculations. In DMSO solution, the copolymer (DHCSO5) with DP of 11.64 showed ACQ behaviour as the concentration increased. In addition, DHCSO5 had good antioxidant capacity with an instantaneous radical scavenging activity of 2,2-diphenyl-1-picrylhydrazine (DPPH) up to 65 % at a concentration of 40 mg/ ml and increased to 100 % after 30 min. Thus, the multifunctional cell-g-P(DHC-alt-EPO) materials had a variety of potential applications in the fields of fluorescent printing, bio-imaging, UV- shielding and antioxidants.

Morphology-controllable amphiphilic cellulose microgels made from self-assembly of hydrophobic long-chain bromide-alkylated-cellulose/gelatin copolymer

A cellulose-based microgel is firstly synthesized via chemically coupling gelatin and cellulose, and then amphiphilic cellulose copolymers (HMGC) are prepared by alkylated cellulose-based microgel from different long-chain alkyl groups. The long-chain alkyl group is mainly bonded onto the residual hydroxyl group at C₆ from the AGU of cellulose and the imino groups of gelatin, respectively. The results of self-assembly behavior of HMGC demonstrate that the critical aggregation concentrations of the microgels are in the range from 0.628 to 0.075 mg/mL, and the corresponding hydrodynamic diameters are between 104-1000 nm. Besides, the HMGC can self-assemble into microgels of various morphologies including cotton flocculence, sphere, rod-like, vesicle, flower-like cluster, snowflake-like, urchin-like, and coral shapes. These novel morphologies can be controlled by adjusting the degree of alkylation, the length of the alkyl chain, and the concentration of microgel. Furthermore, the possible formation mechanism of the multiform microgels is proposed from the chain conformation.

A novel amino cellulose derivative using ATRP method: Preparation, characterization, and investigation of its antibacterial activity

In this study, we prepared a novel amino cellulose derivative (benzyl cellulose-g-poly [2-(N,N-Dimethylamino)ethyl methacrylate]) via a homogeneous ATRP method. The successful synthesis of the novel amino cellulose was confirmed by FT-IR and ¹H NMR. This study addressed the different characteristics of the prepared polymer including the thermal stability, solubility, and X-ray diffraction pattern. The antibacterial activity of the synthesized cellulose derivative was investigated using the diffusion disk method against both gram-negative (Escherichia coli, Salmonella enterica) and gram-positive (Staphylococcus aureus, Bacillus subtilis) bacteria. Based on the inhibition zone, it was confirmed that the prepared benzyl cellulose-g-PDMAEMA possesses acceptable antibacterial activity against Escherichia coli, Salmonella enterica, and Staphylococcus aureus while Bacillus subtilis is resistant to the prepared polymer. Also according to the inhibition zone, it was shown that benzyl cellulose-g-PDMAEMA has more impact on E. coli and Salmonella enterica than Staphylococcus aureus. Molecular dynamics simulation was also used to study the interaction of the synthesized cellulose derivative with a model membrane which presented atomistic details of the polymer-lipid interactions. According to the results obtained from the molecular dynamics simulation, the polymer was able to destabilize the structure of the membrane and clearly express its signs of degradation.

Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization

Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X₂. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

Microwave assisted synthesis and characterization of sodium alginate-graft-poly(N,N'-dimethylacrylamide)

Modification of sodium alginate (NaAlg) was carried out using N,N'-dimethylacrylamide (DMAAm) as a monomer and azobisizobutyronitrile (AIBN) as an initiator under microwave irradiation. The effect of reaction conditions such as concentrations of DMAAm, AIBN, NaAlg as well as microwave power and temperature on grafting and grafting efficiency has been explored. Maximum grafting and grafting efficiency has been observed at 1h of grafting time, 0.291 M of DMAAm concentration, 500 W microwave irradiation power, 0.134 M of AIBN concentration, 75°C of reaction temperature and 0.5 g/dL of NaAlg concentration. The grafted copolymer has been characterized by FTIR, DSC, TGA, (13)C NMR, XRD, SEM, and GPC analysis. Cytotoxicity as standard MTT assay, apoptotic and necrotic effects of graft copolymer were investigated on L929 fibroblast cell. It has been found that the grafted copolymer is biocompatible and thermally more stable than the ungrafted alginate.

Corn starch-based graft copolymers prepared via ATRP at the molecular level

Starch-g-PS and Starch-g-PMMA with controlled graft chains and high graft ratio were prepared at the molecular level.

Recent progress in the chemical modification of syndiotactic polystyrene

This review provides a snapshot of recent progress in the chemical modification of syndiotactic polystyrene.